Problem with only being able to connect one computer wirelessly at a time.

Can anyone help me? I have a WRT110. Here is what happens, say computer 1 is connected wirelessly to the internet then computer 2 gets turned on and trys to connect wirelessly, then computer one will get kicked off of the internet.

I would suggest you to upgrade/re-flash the firmware on your linksys router and check.
This should resolve the issue for you.

Similar Messages

TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
Thor

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Has anyone experience a problem with not being able to add a drumbeat loop to a prerecorded project? When I open the loop browser, there are only a few options available. The rest are greyed out. I can only choose individual drum sounds, not full beats

I have created a project and recorded 2 tracks, one with a guitar and the other vocals. I would like to add a drum loop, but when I pull up the loop browser, all of the normal selections aren't available. Some are greyed out, including "Beats". "All Drums" is available, but when I click on it it pulls up some cymbal sounds only. I've opened some old recordings in GB to see if this is a consistent issue, but it's not. Only this one project won't allow me to use drum loops. Which leads me to believe there is something I have selected or not selected within the project that's not allowing me to see all the loops. Any help would be much appreciated.
Thanks,
G Clef

g_clef wrote:
Only this one project won't allow me to use drum loops.
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops ?
(Let the page FULLY load. The link to your answer is at the top of your screen)

I was working with a chat person about a problem of not being able to connect with iTunes and got cut off

I was working with a apple chat tec and got cut off. How do I get back to that person?

You probably need to reply to the thread below.
https://discussions.apple.com/message/23980460#23980460

So I'm having the age old problem of not being able to connect to the AppStore but the thing is i can get into AppStore but when I try to sign into any account it says can not connect and I have tried my account on other devices and it works

I just need to know what I need to do to fix this account stuff

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I've having a problem with not being able to move the browser window around on my desktop. My last alternative is to uninstall Firefox and try a reinstall, but I'm afraid I'll loose all of my bookmarks. Any insight would be appreciated. Thanks--

Vista Home Premium / Service Pack 2
Intel Core 2 Quad CPU Q 9400 @ 2.66GHz
3 GB Ram
32-bit OS

Did you check what I would consider the first place to look:
* http://kb.mozillazine.org/Problematic_extensions
If the site is still down (at least 12 hours) when you read this try [http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Problematic_extensions Google's cache]
Link or url would make it easier to see which page you tried rather than "your online solution for ...".
* http://kb.mozillazine.org/Firefox_hangs ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_hangs cached version])
* http://kb.mozillazine.org/Firefox_crashes ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_crashes cached version])
* [https://support.mozilla.com/kb/Firefox%20hangs#os=mac&browser=fx4 Firefox hangs | Troubleshooting | Firefox Help]

Problems with Multiple versions of java on one computer

Hi, i current installed 1.3.1_08 on my xp machine and then 1.4.2. I want my "java" command to be using the 1.4.2 version. I try to run some 1.4 native java applets on my xp machine but they fail to run due to the java command being from version 1.3.1_08. I changed both the path and java_home variables in xp to my 1.4.2 installation, but still nothing changes. help plz??

%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\j2sdk_nb\j2sdk1.4.2\bin
java version "1.3.1_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_08-b03)
Java HotSpot(TM) Client VM (build 1.3.1_08-b03, mixed mode)

HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

I'm at the end of my tether with not being able to access itunes which I could do perfectly well before! Now my laptop won't even connect to the internet despite the connection at the hub being excellent! No problem with ipad and phone - only windows!

I'm tired of this problem of not being able to access itunes on my laptop and now no internet access despite connection and strength being excellent. What are windows playing at? Worked perfectly well until recently. Very frustrating and time consuming!

Just a few lines to assure you you are not alone regarding speed delivery. By no means.
I'm on Infinity 2 with HH5 - was virtually guaranteed 63 d/l and told possibly even up to 78. My actual speeds are nearer 15 (yes 15!) to 28 d/l if I am lucky. I've played all the obligatory games of checking and posting and reviewing my HH stats - and of course wasting my time with India "help" customer services who are instructed to read from a script of inane generalities which are usually completely irrelevant and have no connection whatsoever with a user's Specific problem.
It more often than not turns out that the automated monitoring system imposes a software called DLM = Digital Line Management = which (with the endless excuse of improving line stability) increases noise margins and drastically reduces speed. This can kick in pretty rapidly and can take at least 3 to 4 days to modify itself - if indeed at all!!! Usually an Openreach engineer visit is then needed - who will re-set the Profile to what it is you are supposed to be paying for ..... then of course it is totally possible that DLM will re-emerge and the same old cycle of troubles will have to be endured.
We pay in good faith at the outset on the back of so many promises - only to be cynically let down and dismissed once signed up. It is quite wrong we have to continually argue our case to (try) to get anywhere and are always reminded that we are tied into contracts with expensive escape clauses - or that an engineer's visit is only free IF it is proved the fault is not inside your house - which it very rarely is! This is often more an Ordeal than a subscribed service. Superfast reliable Broadband in the UK ? Ha!

The clock on my ipad seems to be stuck? Could this have anything to do with my not being able to connect with FaceTime ?

The clock on my iPad seems to be stuck ? Could this have anything to do with me not being able to connect with FaceTime ?

In order to backup to iCloud the iPad must be plugged into a power source, connected to WiFi and locked - meaning that it must be asleep - or with the lock screen only visible. This is for automatic backups.
If the iPad is not responding at all to any user input, try restarting it or resetting it and see if you can take the steps necessary to back up. You can initiate the backup manually as well.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id's and I can't log in and access those purchases. I want to get back to being able to use one i

1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id’s and I can’t log in and access those purchases. I want to get back to being able to use one id and password and be able to access those purchases.
2) When I upgraded my iPhone 3gs, to the latest version 5.0.1 (9A405), is when I noticed that i couldn’t update my applications. There are two names/accounts on the phone and prior to the update there was just the one. I have tried entering every conceivable password that I have ever used and get the incorrect password error every time. The apps on the iPhone are apparently associated with several/different accounts. I just want to get everything back to the way it was. One id and one password with purchases associated with just one account that can be updated on my computer as well as my iPhone.

Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen

How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

JoBrooke wrote:
I seem to only be able to view one track at a time.
unfortunately, that is how GB works, it only offers a score for a single track at a time

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

Mail abruptly stopped being able to connect with my .mac account. It will download from other accounts.

A week or so ago while I was not at home Mail stopped being able to connect and download email from my .mac account. I can still use Mail to download email from my Gmail and Comcast accounts, however. I can still download .mac email from my iPad and after installing Thunderbird I can download .mac email on my Mac. I downloaded PostOffice, but it won't download .mac email either. There has to be something that has gotten corrupted. Any ideas of what could be wrong and what I can do to get it corrected?
Thanks.

Make that "Postbox" not "PostOffice."

Hi i have problems with my iMac g4 all in one

hi i have problems with my imac g4 all in one ive installed a airport card and its running fine but when i try to connect to my wirless router it connects but i still have no internet,it tells me it cannot find server,im with utility warehouse
has the airport card got its own secruity???????if so how can i disable it????or do i need a dongle??
or would it be best to get hold of utility warehouse
i have another mac running on it and my iphone and an android pad so the g4 is the only one thats not
please help some one as i would like to sell it to a friend who in need of a computer but needs it to be wireless
ty

Reset security questions
http://support.apple.com/kb/HT5312
If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
https://ssl.apple.com/emea/support/itunes/contact.html

Problem with only being able to connect one computer wirelessly at a time.

Similar Messages

Maybe you are looking for