Problem with open hub with application server

Hello...
I have a problem.
I have bw 7.0 ad im usin Open Hub.
When I configured the open hub in my development environment, In the destination tab i try two options
Option 1.
I use the application server, then i choose my server (the development server).
But when i try to transport I get the follow mistake:
Application sevier sapnwd01 does not exist (sapnwd01 is my development server)
I now I can change the table RSBFILE , or made an abap program.
The problem is, i need to pass the transport withouts errors to quality, because i need to transport to my production server.
And in production server I don't have the permission to change tables.
Option 2.
Using a logical file name (this logical file name, i used for other process and its working correctly)
But when i try to transport I get the follow mistake:
Unpermitted name for a file .
I hope you can help me!!
Thanks in advance

Hi Sharayu Kumatkar
Sorry for the delay, I had been problems with my access :$
I check the AL11, there are a lot of directories, so I dont know which its the one
My logicla path is ZAPD_INVERSIONES
My phisical path is /netweaver/bw/fuentes/miig/altamira/
My logical path Definition is :
Logical file ZAPD_INVERSIONES2
Physical file ExtraccionInversiones.txt
Data Format ASC
Aplicat. Area FI
Logical Path ZAPD_INVERSIONES
In definition of variable
FILENAME Test.txt
I get this messaje error while Im trying to transport
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Modo activación)
Unpermitted name for a file
Thanks to help me!!

Similar Messages

Can any one tell me how to write open hubs to application server?

Hello Everone,
I created open hubs and my requirement is to write the file to application server. So, I created logical file name and logical paths as specified in below link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
That is created 'logical file path defination' in 'FILE' transaction. Used the physical path as - 'bw/FTPOUT/BPR/GM/<FILENAME>' as given in above link..
In logical file name I used the above logical file path.
When I run the open hub, I'm getting the ABAP dump "UNCAUGHT_EXCEPTION
CX_RSB_WRITE_ERROR
12/18/2008 09:00:40"
Can any one tell me how to write open hubs to application server?

Hi David,
Goto transaction code - FILE
1) Create a Logical File Path definition, enter the technical name and description by clicking new entries and save it.(z_ftp)
2) create a Logical file name definition using cross client,
enter the logical file name = z_ftp , name = ftp , physical file = ftp_test.txt,
dataformat = ASC, Appln area = BW and Logical path = z_ftp(created from step 1).
click SAVE button.
3) Assignment of physical paths to logical paths, choose your logical path here.
enter the syntax group = UNIX
Physical path = /bwftp/....
Save it .
In the openhub,
choose definition type = file
Check the applicaion sever.
servername = dev
type of file name = Logical file
Applin server file name = z_ftp
separator = |
Hope this helps and solve your problem.
Thanks
Sat

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

Export data from BW to oralce with open hub service.

Hi Dear all,
When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
Kevin

Hi kevinhuang ,
RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
or
RSA1-->Source systems and then right click on Source system and Check
To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
BI Open Hub Destination and data transfer process setup
http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
Hope this helps U.
Regards
Chandra Sekhar
Edited by: Chandra Sekhar T on Apr 21, 2009 3:36 PM

Extract Data with OPEN HUB to a Logical Filename

Hi Experts,
Can anybody help me in sending the link for How to guide...Extract Data with OPEN HUB to a Logical Filename?
Thanks in advance.
BWUser

Hi,
check this links...
http://searchcrm.techtarget.com/generic/0,295582,sid21_gci1224995,00.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1570a990-0201-0010-1280-bcc9c10c99ee
hope this may help you ..
Regards,
shikha

Need help with open hub

Hi eveybody,
I was trying to wok with open hub. Created infospoke, destination i gave was a csv file named d:/openmara.csv path, saved and activated the info spoke. I went to d:/ to view the uploaded files, two file was created, when i try to open a file it says "unable to read" , when i tried to open the second one i could open the file and see some datas but not in a correct format, why is that?
Then i tried to load the data in database, so in the infospoke i selected the option for destination as database,saved and activated the infospoke, now where should i go to see the uploaded datas physically?
Could anyone help me with this.
Thanks,
RR.

Hi,
Thanks for the reply. I created a infospoke and destination was database option. Opened the se16 gave the table name which starts with /bic/....(please correct me if i am wrong),then the initial screen of se16 came up with all the fields , but when i executed it, the table is empty.Could you say why it is happening.
Thanks,
RR.

Archiving object in open hub with logical file name

Hello,
I am trying to use an open hub with a logical file name.
By the SAP help looks like you have to use/define a archiving object:
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
Steps 1 and 2 of "Defining Logical Path and File Names" are done and tested:
       1.      Definition of the logical path name
       2.      Definition of the logical file name
       3.      Assignment of the logical fine name for the archiving object
But is it not clear to me if an archiving object is suppose to be used, which one then?, or if you have to create a new archiving object, with which characteristics?
Any help welcome,
Alberto.

Alberto,
Can you explain what you are trying to do. Are you trying to archive data from a BI object or are you trying to export data out of a BI object using open hub.

ColdFusion compatibility with Sun Java System Application Server

Background: A vendor that is doing a project for our
department told us that ColdFusion MX 6.1 is not compatible with
Sun Java System Application Server Enterprise Edition 8.1 and
beyond. Since we are migrating our server environment to this
release of Sun Java System Application Server Enterprise Edition,
we face a difficult situation in that our ColdFusion applications
will no longer run. Thus, we would like Adobe to answer a couple
questions which will help us determine what course of action we
ought to take.
Q: Will applications we developed using ColdFusion MX 6.1 run
on Sun Java System Application Server Enterprise Edition 8.1? Below
is a detailed description of the Sun Java System Application Server
Enterprise Edition we intend to migrate to.
Q: Is Adobe aware of any compatibility issues with this
configuration?
Q: What is Adobe's support commitment regarding future
releases of ColdFusion MX and Sun Java System Application Server
Enterprise Edition? Does Adobe intend to continue support this
environment?
Configuration: Sun Java System Application Server Enterprise
Edition 8.1_02 (build b24-p11)
Below is the specification levels for the 8.1 server
(J2EE1.4), note it can use J2SE 1.4.2_06 or 5.0 as the JAVA
runtime.
J2EE 1.4 compatible
Components: J2SE 1.4.2_06 or J2SE 5.0
Application and Application Client
Enterprise JavaBeans (EJB) 2.1
Java Servlet 2.4
JavaServer Pages(JSP) 2.0
J2EE Connector Architecture 1.5
JMX 1.2
JMS 1.1
Java Naming and Directory Interface (JNDI) 1.2
and Java Transaction API (JTA) 1.0
Web Services:Java Web Services Developer Pack 1.5
Java APIs for XML Registries (JAXR) 1.0
Java API for XML-based Remote Procedure Calls (JAX-RPC) 1.1
SOAP With Attachments API for Java (SAAJ) 1.2
WS-I Basic Profile 1.0
Other:J2EE Deployment 1.1
J2EE Management 1.0
Java API for XML Processing (JAXP) 1.2
JavaMail 1.3
Java Authentication and Authorization Service (JAAS) 1.0
Java Authorization Contract for Containers (JACC) 1.0

First of all, is there a reason why you are using jRockit?
Since the issue appeared after upgrading the windows, the issue would potentially be in the interaction between JVM and OS.
Also, there were some issues related to memory leak that were fixed in AS 8.2.
May be you should try with a Sun JVM and AS 8.2.

Integrate p6SPY with Sun Java System Application Server 7 ...?

Dear PALs,
Let me know how can I Integrate p6SPY (w3.p6spy.com) with "Sun Java System Application Server 7 2004Q2" on Windows ?
When I try to follow the steps given at http://www.p6spy.com/documentation/install.htm#unspec ,my server throws
INFO ( 1820): JMS5035: Timed out after 30000 milliseconds while trying to verify if the JMS service startup succeeded.
INFO ( 1820): JMS5036: More details may be available in the log file for the JMS service broker instance domain1_server1. Please refer to the JMS provider documentation for the exact location of this log file.
[27/Dec/2004:18:37:35] SEVERE ( 1820): JMS5024: JMS service startup failed.
[27/Dec/2004:18:37:35] SEVERE ( 1820): CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation [NARAYANA:7676]. - cause: java.net.ConnectException: Connection refused: connect
     at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:247)
     at com.iplanet.ias.server.ApplicationServer.onInitialization(ApplicationServer.java:224)
     at com.iplanet.ias.server.J2EERunner.confPreInit(J2EERunner.java:114)
Caused by: com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation [NARAYANA:7676]. - cause: java.net.ConnectException: Connection refused: connect
     at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:231)
     ... 2 more
expecting sagacious reply......
thanks,
SIMPLEbnm

Hi,
You can set the p6SPY on Sun Java System Application Server as follows.
Create a connection pool using Admin Console, please don't specify any database vendor. Then use the following properties.
Data Source Class Name : com.p6spy.engine.spy.P6DataSource
Resource Type : javax.sql.DataSource
and then provide the following property.
user, password and url. Make sure you add the p6spy.jar and properties file to the classpath.
Try to ping the connection pool, and it should work.

Problem while installing java system application server 8.2

Hi
i am trying to install Java System Access Manager 8.2 on LINUX and during this process i am getting the below error.
Valid DNS Domain Name is required.
The DNS Domain name provided could not be validated.
The server being installed require a valid internet name.
Installation cannot proceed until a valid DNS Domain Name is provided.
The above arror is at COMMON SERVER SETTINGS window.
help me out.
varun

Hi,
This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
You will need to setup DNS before installing.
One of these articles may help you:
http://www.aboutdebian.com/dns.htm
http://www.troubleshooters.com/linux/dns.htm
http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
Hope this helps....

Problem while installing the orion application server

Hi
Thanks for help in advance.
I downloaded orion application server 1.5.3 .I followed the installation guide to install the server.When i typed java -jar orion.jar -install in command prompt ,i got following error .
A nonfatal internal JIT (3.10.107(x)) error 'Relocation error: NULL relocation
arget' has occurred in :
'org/apache/crimson/parser/Parser2.maybeComment (Z)Z': Interpreting method.
Please report this error in detail to http://java.sun.com/cgi-bin/bugreport.c
i
Enter an admin password to use:
Confirm admin password:
Installation done
Pls any one tell me how to solve this problem.
With regards
Jyothi

Hi,
This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
You will need to setup DNS before installing.
One of these articles may help you:
http://www.aboutdebian.com/dns.htm
http://www.troubleshooters.com/linux/dns.htm
http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
Hope this helps....

Problems with file transfer to application server

Hi Experts,
am using sap 4.0 version. Now i want to transfer data to application sever in csv format.
I have doubt, since 4.0 is not a unicode check then how can we handle text while transferring to application server.
how we find the text is double bit or single bit? how can i convert this and download to al11.

Hi
If you want to transfer the file to App Server through a custom Program, then you need to use
V_FILENAME = Complete path with filename.
Open dataset V_FILENAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
if sy-subrc EQ 0.
loop at itab into watab.
move watab to V_String.
transfer V_String to V_FILENAME
endloop.
endif.
If you want to transfer the file to App Server manually then use the transaction.
CG3Z
If you want to get the file from App Server through a custom Program, then you need to use
Open dataset V_FILENAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
if SY-SUBRC EQ 0.
DO.
Read dataset V_FILENAME INTO V_STRING.
if sy-subrc ne 0.
exit.
endif.
Move this V_string to Wa
append wa to itab
enddo.
endif.
If you want to Copy the file from App Server manually then use the transaction.
CG3Y
If you want to append the file , then first find out if the file is present in the asked location or not.
Call the FM to List all the Files in the directory - 'RZL_READ_DIR_LOCAL' and store the data in an internal table
Search this internal table to see if the file already exists.
if it is present use
OPEN dataset V_FILENAME in text mode for appending.
if sy-subrc EQ 0.
loop at itab into watab.
move watab to V_String.
transfer V_String to V_FILENAME
endloop.
endif.
Do not forget to CLOSE DATEST after opening it.
Cheers

Problem with WLST in weblogic application server 10.3 on solaris 10 x86

Hi Friends, I installed Sun Solaris 10 on my desktop x86. I am able to install oracle weblogic application server 10.3.
I created one domain and I am trying to start AdminServer on that using WLST command.
Before that , I started the admin server from command as normal start ( nohup ./startWebLogic.sh &) and the server started perfectly alright. After that I was trying to open admin console in firefox browser. It was opening perfectly alright.
Now I stopped the server and checked no processes which are related to weblogic were running , and then initialized the WLST environment using the script "wlst.sh" , which is at (in my system) /usr/bea/wlserver_10.3/common/bin/wlst.sh. Now the environment had been set and the WLST offline prompt came up.
Now I used the below WLST scirpt command
startServer('AdminServer','mydomain','t3://localhost:7001','weblogic','weblogic1');
and the server started perfectly alright, now what I did was , I started admin console at FireFox browser , it prompted me to enter user name and password , I gave them , and once the login is done, then in my shell window , I am seeing error as
**wls:/offline> WLST-WLS-1263965848154: <Jan 19, 2010 11:39:24 PM CST> <Error> <HTTP> <BEA-101017> <[ServletContext@28481438[app:consoleapp module:console path:/console spec-version:2.5]] Root cause of ServletException.**
**WLST-WLS-1263965848154: java.lang.OutOfMemoryError: PermGen space**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass1(Native Method)**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass(ClassLoader.java:616)**
**WLST-WLS-1263965848154: at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)**
**WLST-WLS-1263965848154: at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:344)**
**WLST-WLS-1263965848154: at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:301)**
**WLST-WLS-1263965848154: Truncated. see log file for complete stacktrace**
**WLST-WLS-1263965848154: >**
**WLST-WLS-1263965848154: <Jan 19, 2010 11:39:24 PM CST> <Error> <JMX> <BEA-149500> <An exception occurred while registering the MBean com.bea:Name=mydomain,Type=SNMPAgentRuntime.**
**WLST-WLS-1263965848154: java.lang.OutOfMemoryError: PermGen space**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass1(Native Method)**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass(ClassLoader.java:616)**
**WLST-WLS-1263965848154: at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)**
**WLST-WLS-1263965848154: at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)**
**WLST-WLS-1263965848154: at java.net.URLClassLoader.access$000(URLClassLoader.java:56)**
**WLST-WLS-1263965848154: Truncated. see log file for complete stacktrace**
**WLST-WLS-1263965848154: >**
**WLST-WLS-1263965848154: Exception in thread "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space**
So I thought I have less memory consuming for this weblogic admin server and opened up ,
_/usr/bea/wlserver_10.3/common/bin/commEnv.sh_
and changed the memory arguments as
Sun)
JAVA_VM=-server
MEM_ARGS="-Xms1024m -Xmx1024m -XX:MaxPermSize=1024m" <---- previously these were 32m and 200m and MaxPermSize
and also in /usr/bea/wlserver10.3/common/bin/bin/setDomainEnv.sh_
and in this file also I changed the memory arguments as
*if [ "${JAVA_VENDOR}" = "Sun" ] ; then*
*WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"*
*export WLS_MEM_ARGS_64BIT*
*WLS_MEM_ARGS_32BIT="-Xms1024m -Xmx1024m"*
*export WLS_MEM_ARGS_32BIT*
and restarted the server using the WLST command and again tried to open the admin console on a browser, same error is showing.
(1) Environment : Sun Solaris x86
(2) JDK : sun jdk 1.6._17
Please help me what I am doing wrong here and please let me know the solution.
I was trying to install jrockit 1.6 on this since my OS is sun solaris X86 , there is no compatible jrockit version is not there.
Thanks a lot
Peter

Hi Peter,
As you have mentioned in your Post that
MEM_ARGS="-Xms1024m -Xmx1024m -XX:MaxPermSize=1024m" <---- previously these were 32m and 200m and MaxPermSize
The Setting you have provided is wrong ...that is the reason you are gettingjava.lang.OutOfMemoryError: PermGen space. There is a RRation between PermSize and the maximum Heap Size...
Just a Bit Explaination:
Formula:
(OS Level)Process Size = Java Heap (+) Native Space (+) (2-3% OS related Memory)
PermSize : It's a Netive Memory Area Outside of the Heap, Where ClassLoading kind of things happens. In an operating System like Windows Default Process Size is 2GB (2048MB) default (It doesnt matter How much RAM do u have 2GB or 4GB or more)...until we dont change it by setting OS level parameter to increase the process size..Usually in OS like Solaris/Linux we get 4GB process size as well.
Now Lets take the default Process Size=2GB (Windows), Now As you have set the -Xmx512M, we can assume that rest of the memory 1536 Mb is available for Native codes.
(ProcessSize - HeapSize) = Native (+) (2-3% OS related Memory)
2048 MB - 512 MB = 1536 MB
THUMB RULES:
<h3><font color=red>
MaxPermSize = (MaxHeapSize/3) ----Very Special Cases
MaxPermSize = (MaxHeapSize/4) ----Recommended
</font></h3>
In your Case -Xmx (Max Heap Size) and -XX:MaxPermSize both were same ....That is the reason you are getting unexpected results. These should be in proper ration.
What should be the exact setting of these parameters depends on the Environment /Applications etc...
But Just try -Xmx1024m -Xms1024m -XX:MaxPermSize256m
Another recommendation for fine tuning always keep (Xmx MaxHeapSize & Xms InitialHeapSize same).
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Edited by: Jay SenSharma on Jan 20, 2010 5:33 PM

Problem with clustering of oracle application server 10.1.3.1

Hi
I have clustered two instances of oracle application server 10.1.3.1 running on solaris.
Instance 1
<notification-server interface="ipv4">
<port local="6100" remote="6200" request="6003"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
     <topology>
          <nodes list="10.x.x.1:6201"/>
     </topology>
</notification-server>
Instance 2
<notification-server interface="ipv4">
<port local="6101" remote="6201" request="6004"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
<topology>
          <nodes list="10.x.x.2:6200"/>
     </topology>
</notification-server>
But when i log on to enterprise manager i get the following message on top of the page:
You have more than one instance of the Application Server Control application running in this cluster. This is not a recommended configuration and could lead to unexpected problems. Please stop the additional instances of Application Server Control or disable routing to these instances.
When i click on one of the instances, i get the session expired error.
what is the problem behind this?
regards,

In the doc, it states that you should only ever have one active instance of application server control running in a cluster at a time -- ASC was not designed to operate as a session sharing application, so your session state is specific to one instance. If for some reason you were directed to the ASC application on the other instance, you get errors.
You can use the OC4J admin_client.jar utility or the opmnctl command to shut down the ascontrol application in one of the instances.
-steve-

Problem with open hub with application server

Similar Messages

Maybe you are looking for