Problem with opening a Work Book
Dear Guru's
I am not able to open a workbook in BEx Analyser(3.x v), There are 4 Works under same Query Eg:- MTa, MTb, MTc, MTd.
MTc is not opening and remaining 3 are fine.
I Would be great if some one help me out of this problém.
Thanks in advance...........
Dev
Dear Mathew,
i sloved it.. There is know AuthObject 'S_GUI' in the roles... so i added it.
Now its working ......
Thanks for the instant help.....i add you few points...for your immediate concern....
Thanks once again...
Dev
Similar Messages
-
Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?
Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.
-
Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regiszlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro -
Problem with opening of PDF in my webmail application
I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
What can I do ?Hi,
I have same requirement.
I need to cnvert smartform->pdf->send mail.
The mail is send but the attachment is corrupted.
Can you tell me what code you have written so its working in developement? -
F-32 : Problem with Open Item selection
Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
SachinHello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi -
Problems with opening Acrobat Pro 9 PDF files
Hi. We use Acrobat Pro 9.0.0 to convert our product documentation Word files into PDFs. During the last weeks our customers report more and more problems with opening these files. We usually deliver those on a DVD with Acrobat Reader 5 or another older version. (Please don't ask me why we're still on these old versions!) Did anyone experience similar problems with Acrobat Pro 9 PDF files and older versions of the Acrobat Reader? Does Acrobat Pro 9.0.0 work smoothly with the newest Acrobat Reader 9.1 download?
Please post your comments. Thx a lot - KayI would recommend distributing higher version of Reader as version 5 is just too old but looks like you can't go there.
Acrobat 9 PDFMaker and Adobe PDF printers by default create PDF 1.5 compaible files. PDF 1.5 compatible files can be opened only in Acrobat 6 and above. That's probably the reason why your customers can't see the contents.
What you can do is to change your conversion settings to produce PDF 1.4 compatible files:
- In Word, select Acrobat tab or Adobe PDF menu (depending on your version of Word), select Settings
- Select "advanced settings" in the dialog that comes up
- Choose compatibility as "Acrobat 5", PDF 1.4
IF you print to Adobe PDF printer, you'll find a similar setting in the print dialog. -
Hi,
I have problem with open IR,ID in XI. I can able to logon the xi server through log on pad. But i am unable to open IR,ID, SLD and Runtime work bench.
Can u help me this.
Thanks and regards
manojHi,
In which database you installed.if database is oracle means try to delet oraarch directory log files.
i hope it will help you.
kiran kumar.v -
is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7
I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar. -
Problems with open an Indesign-Document over Network
Hallo,
we have a specialized problem with opening indesign-documents over network. Our users works with windows-pc (windows7) and adobe CS5 and CS6 and they will use there documents which are on our macserver 4.0 which works on OS X 10.10.2.
Sometimes the usurers become this Message
Wouldn't work indesign proberly on windows with documents which are on a macserver?
Please help me.
best regards
chris mueller@Naga Sai J – you cannot open an InDesign CS4 file in the previous version.
But you can export an exchange file format for InDesign CS3.
Go to File/Export and chose INX for export: "InDesign CS3 Interchange-Format (INX)"
That .inx file could be opened with InDesign CS3.
After opening the .inx file, examine it well!
Some things might have changed (things regarding to newer or changed features from InDesign CS4).
Uwe -
Problem with opening a indd file in CC 2014.
When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?
Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
Mylenium -
Problem with opening some of PDFs in Photoshop CS6.
Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file
Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
I can convert and place the file in Photoshop CS6.
I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop. (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Please Help: A Problem With Oracle-Provided 'Working' Example
A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference... -
I am getting problem with internal table & work area declaration.
I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
matnr TYPE makt-matnr,
spras TYPE makt-spras,
maktx TYPE makt-maktx,
maktg TYPE makt-maktg,
celltab TYPE lvc_t_styl,
END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
MATNR TYPE MAKT-MATNR,
SPRAS TYPE MAKT-SPRAS,
MAKTX TYPE MAKT-MAKTX,
MAKTX TYPE MAKT-MAKTG,
CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep -
Has anyone had problems with your iphone working outside of the house, but not inside? Cannot make or receive calls, nor can I send or receive any text messages. This is something that just happened out of nowhere. Can I get some help please?
Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM -
The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what can I do?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
How to get the output in the required format
Hi, I have a table Months it has 2 columns month_id (number) and month_name(varchar2). I wish to get the o/p from a select query such that , when user chooses a specific month_id it should appear first and rest all months should come below it in asce
-
Error While Writing DOM to a CLOB i.e. xmldom.writeToClob
I am running into error while writng and reading from a clob. The Sample Code is as follows : declare p xmlparser.Parser; doc xmldom.DOMDocument; i_tmp CLOB; i_tmp1 CLOB; i_buffer varchar2(32767); i_amount pls_integer; begin p := xmlParser.NewParser;
-
3 Xraids with 2 windows servers config dilemma
I have two windows 2003 R2 servers going to a ATTO 3500 Fibre switch and they are connected to 3 xraids in a 8 port switch. Both servers see all the shares, but everytime I reboot a server each one wants to run a scandisk. If I have each one, hooked
-
Problems installing Sol 10 x86 on Compaq Harware
Please Help! I am a newbie to Solaris and I am trying to understand some of these postings in this thread. I am trying to install Sol 10 on a Compaq DL360 with dual proc 1.26 MHZ and 3 GB RAM. It has an imbeded 5i array controller with two 36 GB driv
-
JDBC Thin Driver Won't Honor Autocommit=FALSE
I have the following code, which intializes a JDBC thin driver connection, and sets the autocommit to false. However, as soon as the statement is executed, it commits on its own. What's going wrong here? I can tell that it is committing, because the