Problem with opening odf document

Hello,
I have some problem with opening pdf document (attached image). Any idea why ?
Regards,

Any idea why ?

Similar Messages

Problem with opening cs4 document in cs5.5

I have quite a big document of a catalog, created in InDesign cs4. It contains many layers and different master pages. When I open this document in cs5.5 layers and master pages get completely confused and the document looks completely different. When I created the inx-file in cs4 and opened it in cs3 everything was alright. Does anybody know what the problem in cs5.5 could the problem? Am I doing sth wrong?

I've been looking at the file, and it is indeed a puzzlement.
There is some good news, however. I don't know why it is happening (perhaps a bug, and maybe John would like to take a look at this, too), but it looks like the Paper-filled rectangle from Hinweise layer on the right of Master Ee is being copied to the left half of the actual document spreads on random layers. The pages that seem to be blank are easy to spot in the Page panel (22, 24, 26 & 32) and you can simply Cmd-Shift click on the rectangles on those pages to override and your text and graphics will be revealed. I'm not immediately picking up any other problems scanning quickly through the pages. For a quick and dirty get it done solution, I think this will work, though I would use the .inx file rather than the .indd for the conversion in CS5.5.
I've looked through the file history, and it is long. This started out in 2007 in CS2 and has gone through updates in CS3 and CS4, and been recovered from crashes at least 4 times (which might have something to do with the strangeness). I also think there are a lot of extraneous unused frames on many of the pages. If it were my project, I'd probably clean it up as much as possible in CS4, even going as far as recreating the master pages in a new document and then going page by page and doing a copy/paste in place of all non-master objects into the new file if you don't want to spend the time to place everythign again from scratch, which in my opinion would be a better idea (I tried moving the pages to a new file, but that didn't make any difference in the CS5.5 conversion). You could also rebuild from Scratch in CS5.5.

Problem with opening Archivelink document because of wrong MIME type

In transaction OAD2 we have a document type FAX which is currently connected to MIME-type application/pdf. This works fine for opening documents having document class FAX and are actuallty a PDF. However, in the past this document type FAX has also been used to store documents, which refer to a MIME type 'image/tiff'.
When opening FAX-documents that are actually a PDF-file, this currently works fine. When trying to view these FAX-documents that are actually a TIFF-file, it won't be shown in e.g. SAP Document Viewer, because the extention is unknown. You you have to save the file locally in order to be able to see it.
Is there a solution to look to the actual document type when opening a document via ArchiveLink, instead of looking to the ArchiveLink document type?
Thanks for any input in this one!
Regards,
Joost

I've been looking at the file, and it is indeed a puzzlement.
There is some good news, however. I don't know why it is happening (perhaps a bug, and maybe John would like to take a look at this, too), but it looks like the Paper-filled rectangle from Hinweise layer on the right of Master Ee is being copied to the left half of the actual document spreads on random layers. The pages that seem to be blank are easy to spot in the Page panel (22, 24, 26 & 32) and you can simply Cmd-Shift click on the rectangles on those pages to override and your text and graphics will be revealed. I'm not immediately picking up any other problems scanning quickly through the pages. For a quick and dirty get it done solution, I think this will work, though I would use the .inx file rather than the .indd for the conversion in CS5.5.
I've looked through the file history, and it is long. This started out in 2007 in CS2 and has gone through updates in CS3 and CS4, and been recovered from crashes at least 4 times (which might have something to do with the strangeness). I also think there are a lot of extraneous unused frames on many of the pages. If it were my project, I'd probably clean it up as much as possible in CS4, even going as far as recreating the master pages in a new document and then going page by page and doing a copy/paste in place of all non-master objects into the new file if you don't want to spend the time to place everythign again from scratch, which in my opinion would be a better idea (I tried moving the pages to a new file, but that didn't make any difference in the CS5.5 conversion). You could also rebuild from Scratch in CS5.5.

Problem with open Word Documents and Quark Documents

Hi,
I am getting a strange problem with OS X Server 10.4.6, running on a G4 Xserve 1Ghz.
When working on files in Microsoft Word X and 2004 after having the file open for a few minutes if you try and save we get an error "Word failed reading from this file", or "Bad network connection".
Also in Quark 6.52 and Quark 6.1 when trying to save a file to the server we get "File not found [-43]". It is possible to open files, and it is also possible to move files onto the share using finder without any problems. To work on documents we are having to work on them locally on the desktop then copy across once done.
The only thing that i can think has changed is the power went off last night, which casued the Xserve to restart. These problems are occuring across all client computers so i am assuming it can only be a problem with the server.
Does anyone have any idea what this could be, or any tests that i can do to detmine what is up with it
Many Thanks
Tim Pearson

Hi David,
I have just tried power-cycling the switches, still getting the same problem.
I will run disk utility on the shares at lunch. I don't think this will help as it is happening on both data drives.
I have now also updated the OS X server to 10.4.7, and have turned the access log and error log on, it is showing no errors in the error log, and i can't see anything in the access log that looks out of the ordinary.
With Quark i can replicate the same problem every time by creating a new project, saving it, altering it and saving it again (this works), then if i alter it again and try and save it comes up with "Duplicate File Name [-48]". It is also not deleting the temporary files, for example "QXP-1055966280.qxp".
Regards
Tim Pearson
Grafika Ltd

Problems with opening keynote documents...corrupted?

I am using the latest Keynote and Yosemite.
Twice now I have gotten the message "Document cannot be reverted" . The file closes and I cannot reopen it. It seems to be corrupted.
What could be causing this?

This message is displayed when opening a Keynote file with a version that is older than the version that created it:
e.g. created in Keynote 6.5 and trying to open with 6.2
Right click the file > Get Info select Open With; in the Open With drop down menu select Keynote 6.5
Then click; Change All

Problems with open an Indesign-Document over Network

Hallo,
we have a specialized problem with opening indesign-documents over network. Our users works with windows-pc (windows7) and adobe CS5 and CS6 and they will use there documents which are on our macserver 4.0 which works on OS X 10.10.2.
Sometimes the usurers become this Message
Wouldn't work indesign proberly on windows with documents which are on a macserver?
Please help me.
best regards
chris mueller

@Naga Sai J – you cannot open an InDesign CS4 file in the previous version.
But you can export an exchange file format for InDesign CS3.
Go to File/Export and chose INX for export: "InDesign CS3 Interchange-Format (INX)"
That .inx file could be opened with InDesign CS3.
After opening the .inx file, examine it well!
Some things might have changed (things regarding to newer or changed features from InDesign CS4).
Uwe

Problem with opening a indd file in CC 2014.

When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?

Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
Mylenium

Problem with opening a Numbers document

I have a problem with a Numbers document, which I created 3 weeks ago and step by step extended with additional functionality. I'm not anymore able to open the document. I can rename the document and maybe - I didn't try - delete the document. But when I'm clicking on the file's icon, the error message appears "Tabelle kann nicht geöffnet werden". It seems that the file is defect but how I it be revived. What steps I have to do to re-open the document?

Check out that thread if you find it helpful. There are some cool ideas there.
Adding a font to pages for Ipad

Problem with opening some of PDFs in Photoshop CS6.

Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file

Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
I can convert and place the file in Photoshop CS6.
I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop. (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Problem with opening a dmg downloaded file.

I have a problem with opening a dmg file type. Example. I down loaded an update for Onyx. The download is placed on my destop. OnyX.dmg. When I click the file, disk utility opens up. I click OnyX.dmg and it attaches the image. I then have the OnyX disk image on my desktop. I click on OnyX.pkg and get the message "There is no default application specified to open the document "OnyX.pkg"
I remember when I 1st installed the program months ago. I just dragged the icon to the applications folder and was done.

There is something rather odd with your defaults for opening things. Double clicking a .dmg file should cause it to mount automatically using DiskImageMounter, and double clicking a .pkg file ought to cause Installer to run. DiskImageMounter is here:
/System/Library/CoreServices/DiskImageMounter
and the Installer is here:
/System/Library/CoreServices/Installer
You can use GetInfo to assign those programs to those file types. You might consider fixing your LaunchServices database. See the discussion thread here:
http://discussions.apple.com/thread.jspa?messageID=5744911
Using OnyX is probably the easiest solution.
Francine
Francine
Schwieder

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Problem with freeze on Document forms

Hi all,
i've a problem with freeze on document's forms (like invoice) when i make changes on matrix.
For example i've an addon that calculate discounts for items and update the information in the matrix. But when I update the info in the Matrix I see the cursor run across the matrix.
This create two problems. The first one is the orrible aspect that the operation assume, the second is that sometimes some cells turn to black and remain ofthis color.
Can someone help me?
Here I post a piece of my code:
    Dim oForm As SAPbouiCOM.Form = SBOApplication.Forms.Item(FormUID)
    Dim oMatrix As SAPbouiCOM.Matrix = oForm.Items.Item("38").Specific
    Dim oRefLine As Integer = 0
    oForm.Freeze(True)
    Dim Cnt As Integer = 1
    Try
      While Cnt <= oMatrix.RowCount
        If oMatrix.Columns.Item("U_RefLineId").Cells.Item(Cnt).Specific.Value <> "" Then
          Dim apDouble As Double = oMatrix.Columns.Item("15").Cells.Item(Cnt).Specific.Value.ToString.Replace(".", ",")
          If apDouble <> 100 Then
            SetMatrixValue(oMatrix, "U_RefLineId", Cnt, "")
            SetMatrixValue(oMatrix, "11", Cnt, oMatrix.Columns.Item("U_OrigQtyMN").Cells.Item(Cnt).Specific.Value)
            SetMatrixValue(oMatrix, "U_OrigQtyMN", Cnt, 0)
            Cnt = Cnt + 1
          Else
            oMatrix.Columns.Item("15").Cells.Item(Cnt).Click()
            SBOApplication.ActivateMenuItem("1293")
          End If
        Else
          SetMatrixValue(oMatrix, "15", Cnt, 0)
          Cnt = Cnt + 1
        End If
      End While
    Catch ex As Exception
      SBOApplication.StatusBar.SetText("Error: " & ex.Message, SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
    End Try
    oForm.Freeze(False)

Hi Daniele,
I use a little different approach because the Freeze on a Form is like parenthesis on formula. You must be sure that the Freeze(true) are balanced by a Freeze(false).
So my pattern is:
Try
    oForm.Freeze(True)
    ' the operation you need to do with the freezed form
Catch Ex as Exception
    ' Menage the errors here
Finally
    oForm.Freeze(False)
End Try
The Finally statement is executed in both case when an Exception is raised or when the code is right executed.
But I think this is not the problem in your code.
If you still having problem, probably we need to examine your sub-routine "SetMatrixValue".
It is also important to know your SAP Business One version because in the past there was a version with a problem in the refresh of matrix.
I use SAP Business One 2007A SP01 PL06 HF1 and I do not have problem with the freezing.
Hope it helps.
Carmine

Problem with opening of PDF in my webmail application

I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
What can I do ?

Hi,
I have same requirement.
I need to cnvert smartform->pdf->send mail.
The mail is send but the attachment is corrupted.
Can you tell me what code you have written so its working in developement?

F-32 : Problem with Open Item selection

Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
Sachin

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

Oracle Text - Problem with filtering binary documents (.doc, .pdf, etc...)

Hi, I have a problem with filtering binary documents (.doc, .pdf, etc...). I use SQL*PLUS for remote access to Oracle 10.2 on Linux and I create table:
CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
I insert to this table:
INSERT into test values(1, 'PATH/text1.doc‘);
INSERT into test values(2,'PATH/text2.doc‘);
and then:
CREATE INDEX test_index ON test(text) indextype is ctxsys.context
parameters (’datastore ctxsys.file_datastore
filter ctxsys.auto_filter’);
Message "Index created" is displayed, but objects: DR$test_index$I, DR$test_index$K, DR$test_index$N, DR$test_index$R and DR$test_index$P are empty => index wasn´t created probably.
I don´t know, where is bug, either bug is somewhere in this code or on the server (wrong installation oracle or constraint privileges). Do you know in what is bug?

The following is an excerpt from the 10g online documentation. Note the items that I have put in bold.
"FILE_DATASTORE
The FILE_DATASTORE type is used for text stored in files accessed through the local file system.
Note:
FILE_DATASTORE may not work with certain types of remote mounted file systems.
FILE_DATASTORE has the following attribute(s):
Table 2-4 FILE_DATASTORE Attributes
Attribute Attribute Value
path path1:path2:pathn
path
Specify the full directory path name of the files stored externally in a file system. When you specify the full directory path as such, you need only include file names in your text column.
You can specify multiple paths for path, with each path separated by a colon (:) on UNIX and semicolon(;) on Windows. File names are stored in the text column in the text table.
If you do not specify a path for external files with this attribute, Oracle Text requires that the path be included in the file names stored in the text column.
PATH Attribute Limitations
The PATH attribute has the following limitations:
If you specify a PATH attribute, you can only use a simple filename in the indexed column. You cannot combine the PATH attribute with a path as part of the filename. If the files exist in multiple folders or directories, you must leave the PATH attribute unset, and include the full file name, with PATH, in the indexed column.
On Windows systems, the files must be located on a local drive. They cannot be on a remote drive, whether the remote drive is mapped to a local drive letter."
With accessible paths and files, you get something like:
SCOTT@orcl_11g> CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
Table created.
SCOTT@orcl_11g>
SCOTT@orcl_11g>
SCOTT@orcl_11g> INSERT into test values(1,'c:\oracle11g\banana.pdf');
1 row created.
SCOTT@orcl_11g> INSERT into test values(2,'c:\oracle11g\cranberry.pdf');
1 row created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> CREATE INDEX test_index ON test(text) indextype is ctxsys.context
2 parameters ('datastore ctxsys.file_datastore
3 filter ctxsys.auto_filter');
Index created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> select count(*) from dr$test_index$i
2 /
COUNT(*)
608
SCOTT@orcl_11g> In the following, I used a non-existent path and non-existent file name, which produces the same results as when you use a remote path that does not exist locally.
SCOTT@orcl_11g> CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
Table created.
SCOTT@orcl_11g>
SCOTT@orcl_11g>
SCOTT@orcl_11g> INSERT into test values(3,'c:\nosuchpath\nosuchfile.pdf');
1 row created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> CREATE INDEX test_index ON test(text) indextype is ctxsys.context
2 parameters ('datastore ctxsys.file_datastore
3 filter ctxsys.auto_filter');
Index created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> select count(*) from dr$test_index$i
2 /
COUNT(*)
0
SCOTT@orcl_11g>

Problem with opening odf document

Similar Messages

Maybe you are looking for