Problem with opening two frame by single hyperlink

HI to everyone,
I making a project , in that i want if i click on a
particular hyperlink. then it open two Different frame which is
showing different content . one is in the same page in which is h
yperlink is appearing pelink (means in the same frame ) and the
other frame showing some other content , Robohelp allowing to do
this event seprately but not simultanously............i want to
perform this both frame should be open at same time by single
click...........
plz if any one know solution of this problem plz let me
know.....................
Thank's
Roziao

Hi RoboWizard,
I understand (I think!!!) about how to create a frameset
using the method you detailed. Say I create a frameset with 2
frames: 'TOC' frame on the left and 'Details' frame on the right.
When I create the frameset I specify the default 'TOC' topic as
tralala.htm, which is a basic list of contents. I don't know the
full list of contents to display until the user clicks on a link to
display a topic in the 'Details' frame. I specify the default
'Details' topic as Welcome.htm, which is an introductory topic.
Say my initial Blurb.htm topic (as described in my previous
post) contains two links:
How to make a cup of tea
How to perform a headstand
If I click on 'How to make a cup of tea' I would like to
display my Outline.htm topic in the 'Details' frame giving an intro
about tea and the art or making it, and a task list Contents.htm in
the 'TOC' frame detailing each step in making a cup of tea. When I
click on a link in Contents.htm, it updates to the relevant topic
in the 'Details' frame.
If I click on 'How to perform a headstand' I would like to
display Outline2,htm topic in the 'Details' frame giving an intro
about balancing and seeing life upside down, and a task list
Contents2.htm in the 'TOC' frame detailing each step in performing
a headstand. When I click on a link in Contents2.htm, it updates to
the relevant topic in the 'Details' frame.
However, what actually happens is:
I click on 'How to make a cup of tea'. Outline.htm topic
displays in the 'Details' frame, and the tralala.htm is still
displayed in the 'TOC' frame. To display Contents.htm in the 'TOC'
frame, I would have click on a separate link.
Same problem when I click on 'How to perform a headstand'.
I hope this example explains my problem a little better. Do
you understand?
I'm sure there is something blatently obvious that will
overcome the problem. I've only recently discovered frames, so my
knowledge is not the greatest on this subject and hope there is an
easy answer to solve my issue. I'm hoping for a 'Doh!' moment!
Many thanks for your help.
Liz

Similar Messages

  • Problem with opening new frame in netbeans

    Hi...
    I have created a jframe in netbeans when i try to open this frame now i got a warning form loaded with errors errors occurred in loading the form data.....
    How to solve this problem?

    How to solve this problem?Learn Java.
    [http://catb.org/~esr/faqs/smart-questions.html]
    db

  • Problem with opening the .fmx file through hyperlink

    I am trying to open a .fmx file through hyperlink. After clicking on the hyperlink a dilogue box opens up and asks for "open from the remote server", "save on the local disk" and cancel. If I click on open the .fmx file opens up and applications starts working.
    Problem is "I do not want this dialogue box to be opened after clicking on the hyperlink". I tried to change the mime type and changed the setting of Internet explorer. But it does not work.
    Any suggestion will be appreciated.
    thanx in advance
    anil dhiman

    whever i refresh the entire application in the tomact then its been recognizedMaybe you're creating and downloading it asynchronously so that the creation of the file isn't finished yet while you're about to download it.

  • The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what ca

    The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what can I do?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

    I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

    Hi Pete. The repair of disk permissions can help resolve  any application crashing or misbehaving.
    As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
    Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
    So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
    As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

  • Problem with opening of PDF in my webmail application

    I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
    What can I do ?

    Hi,
    I have same requirement.
    I need to cnvert smartform->pdf->send mail.
    The mail is send but the attachment is corrupted.
    Can you tell me what code you have written so its working in developement?

  • Problem with opening a indd file in CC 2014.

    When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?

    Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
    Mylenium

  • Problem with opening some of PDFs in Photoshop CS6.

    Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file

    Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
    I can convert and place the file in Photoshop CS6.
    I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop.  (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • F-32 : Problem with Open Item selection

    Hi,
    We have a strange problem with open Item selection for customer clearing in t-code F-32
    In My QA system
    if I input spl GL indicator ="*" and uncheck Normal OI tick,
    the system selects all open items,
    (those with spl GL indicator and those without spl GL indicator)
    In My Dev system
    If I input spl GL indicator ="*" and uncheck Normal OI tick
    the system does not select any open items,
    Please let me know which setting controls this behaviour ?
    Regards
    Sachin

    Hello,
    Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
    In F-32, there is no value like *
    You need to input right Special GL Indicator. "*" will not work here.
    I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
    Please DOUBLE CHECK whether you have unticked normal transaction.
    Regards,
    Ravi

  • S_ALR_87012309 PROBLEM WITH OPENING BALANCES

    Dear Experts,
    My client having problem with opening balances in cash journal report that same showing in INR but not tallyed with carryforward balances. Cash journal carryforawd balances and FS10N balances are tallyed.
    So,please any suggestion to solve that error.
    Best Rgds
    Suma

    It is problem with carryforward balances from one year to another year. We have again run the same programe carryforward programe to fix this problem.

  • Problems with opening Acrobat Pro 9 PDF files

    Hi. We use Acrobat Pro 9.0.0 to convert our product documentation Word files into PDFs. During the last weeks our customers report more and more problems with opening these files. We usually deliver those on a DVD with Acrobat Reader 5 or another older version. (Please don't ask me why we're still on these old versions!) Did anyone experience similar problems with Acrobat Pro 9 PDF files and older versions of the Acrobat Reader? Does Acrobat Pro 9.0.0 work smoothly with the newest Acrobat Reader 9.1 download?
    Please post your comments. Thx a lot - Kay

    I would recommend distributing higher version of Reader as version 5 is just too old but looks like you can't go there.
    Acrobat 9 PDFMaker and Adobe PDF printers by default create PDF 1.5 compaible files. PDF 1.5 compatible files can be opened only in Acrobat 6 and above. That's probably the reason why your customers can't see the contents.
    What you can do is to change your conversion settings to produce PDF 1.4 compatible files:
    - In Word, select Acrobat tab or Adobe PDF menu (depending on your version of Word), select Settings
    - Select "advanced settings" in the dialog that comes up
    - Choose compatibility as "Acrobat 5", PDF 1.4
    IF you print to Adobe PDF printer, you'll find a similar setting in the print dialog.

  • HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

    I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

    It should unzip if you double-cick.
    What are you seeing happen when you do that?
    Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

  • Problem with opening page

    Hi,
    I have problem with open IR,ID in XI. I can able to logon the xi server through log on pad. But i am unable to open IR,ID, SLD and Runtime work bench.
    Can u help me this.
    Thanks and regards
    manoj

    Hi,
    In which database you installed.if database is oracle means try to delet oraarch directory log files.
    i hope it will help you.
    kiran kumar.v

  • Problem with opening odf document

    Hello,
    I have some problem with opening pdf document (attached image). Any idea why ?
    Regards,

    Any idea why ?

  • Problem with opening a dmg downloaded file.

    I have a problem with opening a dmg file type. Example. I down loaded an update for Onyx. The download is placed on my destop. OnyX.dmg. When I click the file, disk utility opens up. I click OnyX.dmg and it attaches the image. I then have the OnyX disk image on my desktop. I click on OnyX.pkg and get the message "There is no default application specified to open the document "OnyX.pkg"
    I remember when I 1st installed the program months ago. I just dragged the icon to the applications folder and was done.

    There is something rather odd with your defaults for opening things. Double clicking a .dmg file should cause it to mount automatically using DiskImageMounter, and double clicking a .pkg file ought to cause Installer to run. DiskImageMounter is here:
    /System/Library/CoreServices/DiskImageMounter
    and the Installer is here:
    /System/Library/CoreServices/Installer
    You can use GetInfo to assign those programs to those file types. You might consider fixing your LaunchServices database. See the discussion thread here:
    http://discussions.apple.com/thread.jspa?messageID=5744911
    Using OnyX is probably the easiest solution.
    Francine
    Francine
    Schwieder

Maybe you are looking for