Problem with Oracle Client(64 bit) install on Windows 7

Hi,
I am trying to install Oracle Client 64 bit (win64_11gR2_client) on my laptop and its giving me all the pre requisite failed for "Physical Memory, Free Space, Architecture and Enviornment variable: Path". So i need to exit that setup.
I have enough space almost 130 GB free on my laptop. Also, i cleared temp data. Then increased physical memory to 4096 MB but still facing the same error and not able to install the Oracle Client on my laptop.
Please assist as soon as possible.
-Parth

Pl identify exact version of Win 7 - you will need Professional version or higher - Home versions are not supported. Pl verify you meet all of the pre-reqs for the install as identified in the Install Guide - http://download.oracle.com/docs/cd/E11882_01/install.112/e16774/pre_install.htm
HTH
Srini

Similar Messages

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Problems with Oracle.DataAccess assembly after installing Oracle 11gR2

Windows 7 x64 SP1
Visual Studio 2010
ODAC112012
Oracle 11gR2 11.2.0.1.0 for Windows x64
Oracle Patch 12429529
IIS 7.0
I had my development machine setup and working with all of the above items except for the Oracle 11gR2(and patch), I was using a separate Oracle server. However everything went bad after the installation of 11gR2, I get the following error when trying to run the web application: "Could not load file or assembly 'Oracle.DataAccess, Version=2.111.7.10, Culture=neutral'"...
My application is built in .NET 3.5 and the application pool is in 32 bit mode in IIS 7.
Do I have to do something with the assembly rebind trick?:
C:\Windows\assembly\GAC_32\Policy.2.102.Oracle.DataAccess\2.112.1.2__89b483f429c47342>Policy.2.102.Oracle.DataAccess.config
Any help is very appreciated.

I don't run Oracle server locally just avoid stuff like this, but since you installed an x64 server while having the application running in x86 mode, one potential issue is that the binding redirect you were using is no longer working because it's set for the 64 bit version instead. You don't have 2.111.7.10 on the machine at all, so try deleting that reference and pointing directly at your ODAC version.
Alternately reconfigure the project to compile for x64 and disable 32 bit mode in IIS, then use the 64 bit client.

Problems with VPN-Client 5.0 instoled on Windows Vista over ADSL Conecction

Hi, I have severals clients that they use Windows Vista and connects throw there lan over a VPN-Client. The clients that has an ADSL connection in there hose has disconect problems. Do you know why?? Do you know same workarround to do?? Thanks.
Regards.

Make sure that you have the right cable pinout and that your ISP has turned on the DSL service. Troubleshoot the DSL connection by watching the modem state of the ADSL interface as the line retrains.
To use the VPN Client, you need
- Direct network connection (cable or DSL modem and network adapter/interface card), or
- Internal or external modem
For further more troubleshoot click this link,
http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client500_501/release/notes/51client.html#wp1550392

Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txt

Duplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette.

Oracle Client 64-bit and Oracle Client 32-bit on the same server

Hi,
I have a Windows 2008 server 64-bit with Oracle Client 64-bit and Oracle Client 32-bit installed on different directories (D:\Oracle and D:\Oracle32)
Is it possible to define for certain applications to use the TNSNAMES entry from the 64-bit Oracle Client
and for other applications to use the TNSNAMES entry from the 32-bit Oracle Client
Once I installed the Oracle Client 32-bit (Oracle Client 64-bit version was already installed) and restarted the server I performed a TNSPING and it defaulted to the Oracle Client 32-bit installation path
Thanks,
Barry

Hello,
When you install a new client on a server, it will update the PATH variable, and add the ORACLE_HOME\bin path to it, at the first place. That explains why the tnsping use the last installed ORACLE_HOME.
What you can do if you want only to change the default path to the tnsnames is to set the environment variable TNS_ADMIN to the path where the tnsnames you want to use is located. You can modify this variable in your application if you want to use another tnsnames.
If you want switch from 32 bits to 64 bits client, then you have to modify the PATH variable.
Hope this will help.
Best regards,
Sylvie

Crash in 32 bit C++ application on Linux 5.4 with Oracle Client 11.2.0.2.

Hi ,
I am getting following crash in 32 bit C++ application built on Linux platform 5.4 with Oracle client version 11.2.0.2.
Program terminated with signal 6, Aborted.
[New process 22157]
#0 0xffffe410 in __kernel_vsyscall ()
(gdb) bt
#0 0xffffe410 in __kernel_vsyscall ()
#1 0xf7dc5c81 in raise () from /lib/libpthread.so.0
#2 0xf73d4d43 in skgesigOSCrash () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#3 0xf7643d61 in kpeDbgSignalHandler () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#4 0xf73d5003 in skgesig_sigactionHandler () from /opt/oracle/11.2.0.2/lib/libclntsh.so.11.1
#5 <signal handler called>
#6 0xffffe410 in __kernel_vsyscall ()
#7 0x00be7df0 in raise () from /lib/libc.so.6
#8 0x00be9701 in abort () from /lib/libc.so.6
#9 0x0804b716 in main (argc=2, argv=0xffabe244) at crewxa.cc:371From the stack trace, it seems that the crash is occurring at oracle client library libclntsh.so.11.1 . When looked at Metalink, there is a note Pro*c Application Cores On 11g Client [ID 1410089.1], which says that Pro *C application consistently produces core dumps with above stack trace in Oracle client 11.2.0.2 .
Such traces are resulting from the function “sqlnst ()”. But in this case, the stack is called from the main function of our application.
Please advice.

Thanks again, Phil.
It seems to be some specific situation, since I could get to install the same version (Client 11.2.0.1 32 bits) in a Windows Vista 64 bits.
I still hope somebody has an answer.
Best regards!

Facing issues with oracle client installation 32 bit 10.2.0.1

Hi ,
I am facing issues with oracle client installation 32 bit 10.2.0.1
Windows 2008 R2 enterprise edition 64 bit
Java 1.6 update 34
Below is the error recieved:
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8079055
Function=[Unknown.]
Library=C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
NOTE: We are unable to locate the function name symbol for the error
      just occurred. Please refer to release documentation for possible
      reason and solutions.
Current Java thread:
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Native Method)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:516)
at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:473)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.setInstallerKey(OiipgBootstrap.java:511)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:418)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:401)
at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:872)
Dynamic libraries:
0x00400000 - 0x0040B000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\javaw.exe
0x77C60000 - 0x77DE0000 C:\Windows\SysWOW64\ntdll.dll
0x75AB0000 - 0x75BC0000 C:\Windows\syswow64\kernel32.dll
0x77420000 - 0x77467000 C:\Windows\syswow64\KERNELBASE.dll
0x77370000 - 0x77410000 C:\Windows\syswow64\ADVAPI32.dll
0x76610000 - 0x766BC000 C:\Windows\syswow64\msvcrt.dll
0x75DD0000 - 0x75DE9000 C:\Windows\SysWOW64\sechost.dll
0x776E0000 - 0x777D0000 C:\Windows\syswow64\RPCRT4.dll
0x757C0000 - 0x75820000 C:\Windows\syswow64\SspiCli.dll
0x757B0000 - 0x757BC000 C:\Windows\syswow64\CRYPTBASE.dll
0x77470000 - 0x77570000 C:\Windows\syswow64\USER32.dll
0x764F0000 - 0x76580000 C:\Windows\syswow64\GDI32.dll
0x77C30000 - 0x77C3A000 C:\Windows\syswow64\LPK.dll
0x75820000 - 0x758BD000 C:\Windows\syswow64\USP10.dll
0x74EA0000 - 0x74EEC000 C:\Windows\system32\apphelp.dll
0x6EF10000 - 0x6EF9D000 C:\Windows\AppPatch\AcLayers.DLL
0x76720000 - 0x7736A000 C:\Windows\syswow64\SHELL32.dll
0x761D0000 - 0x76227000 C:\Windows\syswow64\SHLWAPI.dll
0x76350000 - 0x764AC000 C:\Windows\syswow64\ole32.dll
0x75F30000 - 0x75FBF000 C:\Windows\syswow64\OLEAUT32.dll
0x74660000 - 0x74677000 C:\Windows\system32\USERENV.dll
0x74650000 - 0x7465B000 C:\Windows\system32\profapi.dll
0x74340000 - 0x74391000 C:\Windows\system32\WINSPOOL.DRV
0x74570000 - 0x74582000 C:\Windows\system32\MPR.dll
0x6E8B0000 - 0x6EAC8000 C:\Windows\AppPatch\AcGenral.DLL
0x6EFA0000 - 0x6F020000 C:\Windows\system32\UxTheme.dll
0x6F060000 - 0x6F092000 C:\Windows\system32\WINMM.dll
0x74840000 - 0x7484F000 C:\Windows\system32\samcli.dll
0x6F0D0000 - 0x6F0E4000 C:\Windows\system32\MSACM32.dll
0x74C80000 - 0x74C89000 C:\Windows\system32\VERSION.dll
0x6F340000 - 0x6F343000 C:\Windows\system32\sfc.dll
0x6F260000 - 0x6F26D000 C:\Windows\system32\sfc_os.DLL
0x6F040000 - 0x6F053000 C:\Windows\system32\dwmapi.dll
0x758C0000 - 0x75A5D000 C:\Windows\syswow64\SETUPAPI.dll
0x75C90000 - 0x75CB7000 C:\Windows\syswow64\CFGMGR32.dll
0x77570000 - 0x77582000 C:\Windows\syswow64\DEVOBJ.dll
0x75DF0000 - 0x75F27000 C:\Windows\syswow64\urlmon.dll
0x775A0000 - 0x77695000 C:\Windows\syswow64\WININET.dll
0x75FD0000 - 0x761CF000 C:\Windows\syswow64\iertutil.dll
0x76230000 - 0x7634E000 C:\Windows\syswow64\CRYPT32.dll
0x75FC0000 - 0x75FCC000 C:\Windows\syswow64\MSASN1.dll
0x6F0C0000 - 0x6F0C6000 C:\Windows\system32\SHUNIMPL.DLL
0x6F030000 - 0x6F03D000 C:\Windows\system32\SortServer2003Compat.dll
0x75CC0000 - 0x75D20000 C:\Windows\system32\IMM32.DLL
0x75BC0000 - 0x75C8C000 C:\Windows\syswow64\MSCTF.dll
0x08000000 - 0x08138000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
0x10000000 - 0x10007000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\hpi.dll
0x003F0000 - 0x003FE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\verify.dll
0x007B0000 - 0x007C9000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\java.dll
0x007D0000 - 0x007DE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\zip.dll
0x051D0000 - 0x052E2000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\awt.dll
0x052F0000 - 0x05341000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\fontmanager.dll
0x6E7C0000 - 0x6E8A7000 C:\Windows\system32\ddraw.dll
0x6F020000 - 0x6F026000 C:\Windows\system32\DCIMAN32.dll
0x75DA0000 - 0x75DCD000 C:\Windows\syswow64\WINTRUST.dll
0x6E6F0000 - 0x6E7BC000 C:\Windows\system32\D3DIM700.DLL
0x05770000 - 0x05793000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JavaAccessBridge.dll
0x007E0000 - 0x007E5000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jawt.dll
0x007F0000 - 0x007F7000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JAWTAccessBridge.dll
0x06340000 - 0x06359000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\oui\lib\win32\oraInstaller.dll
0x06470000 - 0x0648E000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jpeg.dll
0x776B0000 - 0x776DA000 C:\Windows\syswow64\imagehlp.dll
0x6E600000 - 0x6E6EB000 C:\Windows\syswow64\dbghelp.dll
0x776A0000 - 0x776A5000 C:\Windows\syswow64\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation   total 704K, used 90K [0x10010000, 0x100d0000, 0x10770000)
eden space 640K, 13% used [0x10010000, 0x10026448, 0x100b0000)
from space 64K,   2% used [0x100c0000, 0x100c07a8, 0x100d0000)
to   space 64K,   0% used [0x100b0000, 0x100b0000, 0x100c0000)
tenured generation   total 8436K, used 5698K [0x10770000, 0x10fad000, 0x16010000)
   the space 8436K, 67% used [0x10770000, 0x10d00a40, 0x10d00c00, 0x10fad000)
compacting perm gen total 12288K, used 12049K [0x16010000, 0x16c10000, 0x1a010000)
   the space 12288K, 98% used [0x16010000, 0x16bd47a0, 0x16bd4800, 0x16c10000)
Local Time = Thu Aug 22 14:42:03 2013
Elapsed Time = 40
# HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
Thanks

10.2.0.1 is not supported/certified on Win 2008, so expect issues with the install and/or with using the software.
Why cannot you use a supported version - minimum is 10.2.0.4, which is only available to customers with an Extended Support contract
http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#BABGFAJI
HTH
Srini

Install oracle client 32 bits on 64 bits windows

We need to intall Oracle driver for OLEDB on a SQL server box.
The SQL server is windows 2008 R2 and SQL server 2008 R2, 64 bits.
But because we have some SSIS packages that need to run in 32 bits,(for example the source file is the Excel), so we are installing oracle client 32 bits instead of 64 bits on the windows box which is 64 bits.
Anyone knows if this will work?
Thanks

I think it should work. I have a server Win 2008 x64 which runs 32 bit 11g client and we haven't had an issue. I had the same situation as you are in which required me to install 32bit client on x64 server. if you have a test server I would try this on the test server identical to production to make sure that you won't see any hick ups in your production environment. hope this helps.

Problem with Oracle Designer 10

Hi,
I have a problem with Oracle Designer 10 version 9.0.4.7 installed in Windows 2000 platform.
I don't know if the origin of the problem is at the server side or client side. I try to launch the repository reports but it doesn't work. The screen never appear. I have to finish the client process but the oracle session remmains:
SID SERIAL# LOGON_TIME PROGRAM
============================
36 13137 01-12-2008 des2k61.exe
38 15583 01-12-2008 ckrpt61.exe
The second line belongs to repository report process.
I have to kill Oracle session manually. Do you know if the problem is in the server side or client installation??
SGA VALUES
=============================
Total System Global Area 320302432 bytes
Fixed Size 736608 bytes
Variable Size 285212672 bytes
Database Buffers 33554432 bytes
Redo Buffers 798720 bytes
Client values
=============================
1Gb RAM
Windows 2000 SP4
3Gb Virtual Mem
2 GHz AMD
Thanks in advance.

I have two homes for oracle developer ..
old ---- C:\*DevSuite*
new -- C:\>C:\*DevSuite_1*
I have executed the below statement .........
C:\>C:\*DevSuite_1*\bin\tnsping disd9i
TNS Ping Utility for 32-bit Windows: Version 10.1.0.4.2 - Production on 09-SEP-2
010 19:29:22
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\*DevSuite*\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(Host = VHRTY76.ASPNDT.NET)(Port = 1521))) (CONNECT_DATA = (SID = POU)))
OK (720 msec)
I think the new one is point to the old version 9 - sqlnet.ora and tnsnames.ora .
How to point the new one..?
Can I have two tns_admin as env variable ?
Edited by: user12045030 on Sep 9, 2010 7:12 AM

Can a program compilied with 32 libraries work with Instant Client 64 bit?

We are compiling our program on IBM AIX 5L and HP-UX PA_RISC with 32 libraries (using ORACLE_HOME/lib32)
for AIX and HP-UX RISC the only available Instant Client 10gR2 is 64 bit. there is no 32 version.
can a program compilied with 32 libraries work with Instant Client 64 bit?

64 bit clients can be downloaded from here: http://www.oracle.com/technetwork/topics/dotnet/downloads/index.html
That said, Visual Studio itself is 32 bit, so if you want the developer tools to work, you'll need a 32 bit client. If you're not using the developer tools in your project and you're compiling your project for AnyCPU or x64, the 64 bit client will work. If you're compiling for x86, you need the 32 bit client. (If you want to do both, you'll need two clients installed.)
edit - Actually, it looks like in this case you might be running into a problem of needing a 32 bit client & ODBC connection. The error mesage could be misleading here as Visual Studio itself is 32 bit. Did you create the ODBC connection using control panel? If so, that's a 64 bit connection.
32 bit ones are created using c:\windows\syswow64\odbcad32.exe
Edited by: Tridus on Jan 3, 2013 3:24 PM
Edited by: Tridus on Jan 3, 2013 3:24 PM

Oracle Client 32 bit installation on Exadata Machine

Hi,
We are starting our migration to exadata next month.
One of the issues we have is regarding to our Informatica ETL tool . Our application is licence to 32 bit.
The database repository of this tool is currently running on linux redhat 5.5 64 bit with 11203 rdbms version.
We had to install oracle client 32 bit software , in order to allow the application to connect to the database.
Is it possible to install oracle client 32 bit on exdata ? If not what would you suggest ?
Best Regards

I can't speak for Informatica, but it should be able to connect to the database over the network, so the database server OS wouldn't matter in that case. That is, if Informatica runs on a different Linux machine that runs 32-bit Linux, it can connect over the network to the Exadata database server node. If Informatica requires to run on the database server directly, you'd have to ask them how they can support 64-bit Linux (or you may have to modify or add to your license).

Problem with Oracle.Data.Access

Hi everybody,
this is my problem, I've developed a web application witch .net 2005 (c#) and oracle client 10.
Now I need to compile all my application with oracle client 9, then I have removed client 10 and installed client 9.
But this is the problem, in References of my project I can't find Oracle.DataAccess.dll ! then I can't compile my project!
In previous installation (with client 10) the dll was located here
C:\oracle\product\10.2.0\client_1\bin\
the direcotry installation of client 9 is the same but I can't find it on my pc...
How can I switch to client 9 from client 10 without rewrite all code??
thank so much!!!!
Sergio

Ok now I have the following situation...
I've downloaded and installed this version ODAC92070.exe and I can find the file
C:\oracle\ora92\bin\Oracle.DataAccess.dll ...
In my reverence in visual studio2005 I delete the old file and I load the new, but qhen I try to compile this error appears
'Oracle.DataAccess.Client.OracleDataReader' does not contain a definition for 'HasRows'
why??
this method is not supported in oracle client 9?

Problem with Variable Client Support

Hello,
I work with Labview 8.5 and Crio 9014.
I have a problem with Variable Client Support. When I try to compile my project I have the following error:
"The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
Can somebody help me?
Thanks

I have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI...
The Network Variable Engine and Variable Client Support must be installed on the RT target
for this application to function properly. If the Network Variable Engine is not supported on
the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
to My Computer in the project. Doing this will deploy the variables to localhost but
will still require that Variable Client Support be installed on the RT target.
Could someone help please ?
Attachments:
ni.png ‏95 KB

Please Help: A Problem With Oracle-Provided 'Working' Example

A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)

If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference...

Problem with Oracle Client(64 bit) install on Windows 7

Similar Messages

Maybe you are looking for