Problem with original Creative Webcam

Yes i have the original webcam the Pd00 model, and i installed the drivers that i found on this website but they arent allowing me to take pictures with the webcam. it checks to make sure the video is clear it pops up i can see myself fine then it installs and thats it. I lost my original cd for software so i cant install that way, does anyone know what i can do? I need the application software not just the drivers

MEFSONER,
The application can be find at the same download page where you got the driver.
http://asia.creative.com/support/downloads/
Jason

Similar Messages

Problems with Adobe Creative Cloud Packager

Hello Community
I have a problem with the Creative cloud packager.
i can pakage fine but when i try to install the package on another mac it simply says installation failed after a few minutes, i can see it installs Adobe Bridge in the launchpad but nothing more.
The package includes Photoshop , Bridge, Muse, Premiere, Illustrator, Indesign, After Effects,l Dreamweaver, incopy, lightroom,
The install works fine if i try to install it on the mac i made the package with
The mac im trying to install on is a imac 27 " 5K osx 10.10

Hi KwKn,
Does it work on the machine on which you are creating the package?
Do you have any security software running on the machine?
Also I would request you to go through the below link.
Creative Cloud Help | Packager
Regards,
Anand

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

Problems with my Creative Sound Blaster X-Fi Xtreme Gamer bulk P

Hey there!!!
I acutally have a Problem with my Creative Sound Blaster X-Fi Xtreme Gamer bulk PCI-Card. The Card by it self is working perfectly. But i cant use the Digital-In as the Mic in. I dont know how to turn it so that the Digital-In is the Mic-In. So my Microphone donst work. I hear everything but nobody hears my Voice. There is sometimes a Signal but not the correct, the Guys playing with me dont hear anything of my voice...
Can somebody help me plz?
Greetings Thomas

Moep wrote:
Why i must use TORRENT?
Why is this driver not on your page?!
Please fast help...
and this is a secure download you mean? ....
Jeez, calm down already. I never said you HAD to download it, but if you want any of the applications that work in XP to work in Vista then you're going to need that disk; either by downloading it or fromk here,?http://us.creative.com/products/prod...7&product=6743?
2. ISN'T THIS THE DRIVER FOR ME?! http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7838Message Edited by Moep on 07-3-20070:7 PM
Maybe you really should take a vallium or something and re-read what I posted, then you may just grasp the fact that that is the exact driver I told you you needed.

Problem with Adobe Creative Cloud software for PC

Good Evening,
I have a problem witg Adobe Creative Cloud software for PC
I have Windows 8.0 x64. I downloaded few apps using the Creative Cloud software and had to restart my computer due to the pending windows updates. After I restarted my computer, the software didn't work proprely. When i launch it, the cloud icon is gray and when i click on it i can only see the title and nothing else (white space) Each time i close it, Windows says that application caused an error and it need to be shutted down. I tried reinstalling the Creative Cloud software multiple times and it didn't help. Is there any other way to install the software without using the app ?

Hi
Is it specific with Muse not working ? Or its with any application installed using creative cloud app manager
If its only Muse , then please try follow solution 1 and 2 in this document :
http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
If still same issue, then please get in touch with support directly.
Thanks,
Sanjit

Problem with Zen Creative

I bought my player the last summer and I have the white screen of death since two months. I have already read the post of the white screen, but I want to know if that is a problem of all player Zen Creative 4gb/8gb/6gb or it happens only to some.
Please answer my question, im thinking to bring it back, but if it is a problem of all the players, i will not trouble to send it. I really like the player, but with this problem i'm very upset with Creative.
Thank you for answer <img title="Smiley Wink" src="http://forums.creative.com/i/smilies/6x6_smiley-wink.gif[/img] alt="">

Some of my friends have been experiencing similar problem with the Zen Creative but that does not necessarily mean there is some problem with the software. You should double check before taking any step.

Problem with W530 and WebCam

I have a ThinkPad W530, which runs a 64-bit version of Windows 7. The computer is about 3 months old.
I'm suddenly having problems with the webcam, showing an entirely black display. No error messages of any sort, and I'm seeing the same results in any of my apps that use a webcam, including Skype, GoToMeeting and VSee.
How do I find this problem and fix it?

Responding to three replies simultaneously:
1) A check of the Imaging Devices section in the Device Manager shows that I have "Camera Plus (VGA Resolution Maximum)" , where it's using a Lenovo Driver (version 1.0.1.1) and dated 6/19/2012. No entry for "Integrated Camera".
This one could be part of the problem, a missing driver, although Windows Plug-and-Play isn't detecting that anything is missing.
2) No change in behavior, if I halt the Camera Mute service.
3) Drivers are mostly current, unless there's one that's entirely missing. There's several unrelated drivers that aren't current. As a rule, I don't update drivers, unless there is a reason to do so -- I have experience with driver updates being disruptive. It's one thing to update the driver for the webcam, if I'm having problems with the webcam, but I'm not going to update a Bluetooth driver, Just Because, especially if the offered update's severity is less than Critical.
If Windows isn't auto-detecting Integrated Camera, I don't know if that means that the auto-detect is simply missing that (and that I should try to find that driver and install), or that my hardware isn't using that particular driver.

PLEASE HELP - Serious problem with my Creative Zen Touch firmware

Ok, so I finally decided that I would upgrade to the latest firmware version for my Creative Zen Touch. I knew that doing so would erase everything on it, so I backed up everything onto my computer's hard dri've. So from that standpoint, I'm in the clear.
HOWEVER, during the upgrade process, my computer froze, leaving my precious MP3 player without ANY firmware. This then drove it into "recovery" mode, where I can either clean up, format, or reload firmware. I've gone through each of these options, but when I go to "reload firmware" my computer will no longer detect my Zen! I've tried reinstalling different driver versions, different firmware versions, etc. The bottom line now is that my mp3 player has no firmware, and my computer won't detect it.
I feel like I probably need to go back to the basics. Unfortuantely, I don't have my installation CD with me. Can anyone post the initial installation file please? Thanks in advance!
I really hope I can work this out, I don't know if I've gone a day without my Zen in the past two years!

Simon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838

Problems with my Creative Micro Zen hanging on the Creative Logo Scr

I've been having problems with my Zen and have sent the following email to creative but if any one has any suggestions etc on what to do could they please email me thanks
My Creative Micro Zen 5GB player has been hanging whilst using the player.
I followed the advice found in the manual and on the creative web site to reset the player by removing the battery and then reinstalling it. This worked on a few occasions.
However the player hung again and so I tried to rest it as before, when I replace the battery the player turned on and lights up with the Creative logo screen, but then hangs on the Creative logo screen, despite waiting to see if the player continued with the start-up, it did not and so then I tried resetting again, by removing the battery and reinstalling it.
However the player is still hanging on this screen and I cant get it move away from this screen. The player wont allow me to move away from this screen at all, so I am unable to carryout the disk clean up which was also suggested. When the resetting didn?t work, I tried taking the battery out and leaving it overnight and then replacing the battery, however the player still hangs on the Creative logo screen. This has been continuing now for three days.
I have also tried plugging the player into the power charger and it still hangs on the Creative logo screen. The backlight on the Zen Player lights up when the player first turns on but once the Creative logo appears on screen the light fades out. I have also tried recharging the battery to see if maybe the problem was a flat battery but this didn?t appear to work as it is still hanging. However the Zen does light up as it does when it charges normally. I also own a spare battery, which I have tried but the Zen player still hangs on the Creative Logo page.

I found the solution! I saw numerous posts saying that all you could do is send it back to the company, then I found this one:
Hi All,
My zen has been down for the last week, hangs up on creative screen. I took the battery out and was able to get to the recovery mode but "disc scan" would not do anything(in limbo) and "reboot "met with the same result, nothing. If you want to talk to anyone at creative and are past your 6 month warranty window you have to pay $20 for the phone call. Well I decided to take matters into my own hands and spent yesterday morning researching old threads about this problem. I kept finding an uncommon fix. When you hold your power button on and replace you battery and the recovery screen starts up you wrap on the back with your knuckle, in my case I hit my zen face down sharply on my dresser. To my amazement the "Doobie Brothers" started playing and I have'nt had any problems yet. Evidently these systems have a hard dri've that hangs up. It may not work for you but it cured my glitch.
Steve C.
It worked for me, but only after four or fi've tries. Good Luck!<IMG height=6 src="http://forums.americas.creative.com/i/smilies/6x6_smiley-very-happy.gif" width=6 border=0>

Problem with t6100 creative..

hi all....
i have a problem with my t6100 creative...sometimes when im listening music or something else the sound from the speakers strenght or lowered alone :angry: can anyone help me ?!!

I have the same problem with the front right speaker cable, can anyone help please?
Message Edited by Merrim on 07-20-2008 03:21 AM

TS2634 Problem with original sync / charge cabel

Hello. I have problem with my original sync / charge cabel. I have two ipod touches. 1st and 4th generation. From start my cable works great with my 4thG iPod but when I charge 1stG iPod several times then my 4thG iPod said that accessory is not supported. Now on 1stG it's working fine but I am not able to charge my 4thG iPod. Help me with this.
Thank you
John J.

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.

Problem with reinstalling creative cloud

Hello, I recently downloaded creative cloud and then subsequently photoshop cc. I was only actually able to use it once and then later that day when I turned on my laptop it then told me that there was a problem and that my computer needed to revert back to a time before there was a problem and that meant that creative cloud and photoshop were removed. I then went back to reinstall creative cloud and i got a very confusing message.I have attached a picture of the message that displays, I have no idea what to do. Any help would be greatly appreciated.

Hi, i haven´t the answer, but 2 or 3 days ago, when i install the photoshop cc too i have a problem, when restart my pc appear a error then was needed return the pc the past point restored, because no start, from thats day, daily hace problems with the products from the cloud...
Try using the clean tool by adobe, was very crazy that tool, but, using him i reinstall the software, but even i have problems...

Problems with connection Creative zen M and DVD-CD pla

Hi,
I have problems whem i connect my zen to the DVD player. I've connected zen with a cable going from the headphones to the audio line in (red and white) at the back of the DVD system. I get sound but the problem is that my zen automaticly switch to the FM radio mode, when it should be playing from the music libary. This happens by 70% of the numbers. How can I deal with this problem?
Problem 2 is that I hear a strong noise when I connect my zen to the DVD player. It's al low sound which comes back in all the 5 boxes en sounds like a bee...
Problem 3 is that I can't get the full volume on the DVD system. Even when zen is max on 25 i've to put the DVD system also max before a normal sound is coming to me...
Can anybody please help me? Thanks!

Hi there,
. The reason the ZVM is switching to fm radio is because the headphone jack also supports a wired remote that controls some of the ZVM functions there will be some sort of back feed from your DVD head unit to the ZVM causing this to happen.
2. The headphone jack does carry a bit of noise when used with line in applications and compared to the line out function of the ZVM is muffled and lacks power(this also could be noise in your DVD unit).
3. Same as above(2) the A/V out function has a set volume and is louder and much clearer than the headphone out jack.( The line out is the A/V out function of the ZVM found in the supplied adaptor that plugs into the bottom of the ZVM)
To overcome this problem simply use the line out function of the ZVM either through the dongle and an A/V cable or get an after market cable to suit and that should solve your problems with this type application.
Let us know how you go with it
Heres the bits
http://us.creative.com/products/prod...7&product=4484
Or you can search for a cable that plugs straight into the bottom of the ZVM and has rca's on the other end, you should be able to find then via a search here or through epizenter.net in one of the threads
Message Edited by AussieBoy on 08-0-2006 09:50 PM

A problem with ALL creative sound cards i am hav

All creative sound cards that i've used, three i think in the past year. SB Li've, SB Audigy 2 ZS, and the Audigy 2 Zs Platinum Pro. Every time i connect speakers or headphones to the jack, i get really REALLY low sound output, also before windows loads or shuts down i hear a "bump" coming from my speakers/headphones.... I have no idea whats going on....
Specs are:
p4. 3.0
DFI Lanparty 875 rev. B
gig corsair pc4000 dual channel
2x raptor raid 0
SB Audigy 2 ZS Platinum Pro
ATI Radeon x800pro
Headphones i use are bose acoustic 2 headphones
Speakers are logitech x-530
If anyone has had this happen to them before or if anyone has any possible remedies for this I would really appreciate, if this doesnt help im done with creative sound cards =/
[edit]: forgot to mention this is only for the audio jacks on the sound card itself, on the ZS platinum pro, when i connect to the jack on the hub, the sound is alrightMessage Edited by mrkuku on 06-2-2005 06:36 AM

figured out my problem, my built in sound card drivers were conflicting with the creative drivers. Thought that if i turned off the built in sound card from bios that i wouldn't need to delete the drivers also. Thanks for any that read this and tried to figure it out. Now its working like a charm.

Problem with original Creative Webcam

Similar Messages

Maybe you are looking for