Problem with OS X, Cursor, Zoom, Dictionary Issues

Hi All,
I'm wondering if someone can provide some guidance to problems I've recently been having with my Mac Book Pro laptop. Starting about a week ago, my cursor on the screen seemed to grow a mind of it's own and all of a sudden started acting strangely. When I'd go to scroll down a screen it wouldn't respond at first and then it would respond but not go anywhere in the direction I was moving it. Simultaneously, the screen would zoom in and out and become unresponsive and then whatever text was in the range of the cursor would randomly hightlight in yellow and a dictonary definition of the word would pop up.
If anyone has any experience with problems such as these, can you please let me know. I'm having these issues frequently enough to make the computer really unusable. I'm not sure if this is a problem with my computer itself or some software glitch. I've never had problems with this MacBook Pro before, and it is very new, purchased just like 18 months ago.

Portables and Magic Trackpad: Jumpy or erratic trackpad operation

Similar Messages

  • Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers a

    Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

    Good day!
    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Regards,
    Pfaffenbichler

  • Problem with my hand cursor: it shows three little hands

    Hi there,
    I work for many years with CS4 and now suddenly, my hand cursor shows up as three little hands in a row. I don't know what went wrong or how to correct this. Please help
    Bert

    Hi there,
    That works! And my mouse is scrolling a lot smoother too! Thanks a lot! I am very grateful.
    Best Regards
    Bert
    Boteijken 323
    3454 PD De Meern
    Tel:   030-8201164
    Mob: 0655-720309
    Email:  <mailto:[email protected]> [email protected]
    Van: R_Kelly [email protected]
    Verzonden: zaterdag 31 augustus 2013 17:32
    Aan: Roozworks
    Onderwerp: Problem with my hand cursor: it shows three little hands
    Re: Problem with my hand cursor: it shows three little hands
    created by R_Kelly <http://forums.adobe.com/people/R_Kelly>  in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5642784#5642784

  • Problem with native SQL cursor in generic data source

    Hi, All!
    I am implementing generic data source based on FM.
    Because of complicated SQL I canu2019t use Open SQL and RSAX_BIW_GET_DATA_SIMPLE-example u201Cas isu201D.
    So, I have to use Native SQL. But Iu2019ve got a problem with a cursor. When I test my data source in RSA3, everything is Ok. But, if I start appropriate info-package, I get error u201CABAP/4 processor: DBIF_DSQL2_INVALID_CURSORu201D. It happens after selecting of 1st data package in line u201CFETCH NEXT S1 INTOu2026u201D. It seems to me that when system performs the second call of my FM the opened cursor has already been disappeared.
    Did anyone do things like this and what is incorrect?
    Is it real to make generic data source based on FM with using Native SQL open, fetch, closeu2026

    Hi Jason,
    I don't think this SQL is very valuable It is just an aggregation with some custom rules. This aggregation is performing on info-provider which consists of two info-cubes. Here we have about 2 billion records in info-provider and about 30 million records in custom db-table Z_TMP (certainly, it has indexes). I have to do this operation on 21 info-providers like this and I have to do this 20 times for each info-provider (with different values of host-variable p_GROUP)
    SELECT T.T1, SUM( T.T2 ), SUM( T.T3 ), SUM( T.T4 )
            FROM (
                    SELECT F."KEY_EVENT06088" AS T1,
                            F."/BIC/EV_COST" + F."/BIC/EV_A_COST" AS T2,
                            DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_COST") +
                              DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_A_COST") AS T3,
                            DECODE( D.SID_EVENTTYPE, 23147, F."/BIC/EV_DURAT",
                                                          23148, F."/BIC/EV_DURAT",
                                                          23151, F."/BIC/EV_DURAT",
                                                          23153, F."/BIC/EV_DURAT",
                                                          23157, F."/BIC/EV_DURAT",
                                                          23159, F."/BIC/EV_DURAT",
                                                          24896734, F."/BIC/EV_DURAT",
                                                          695032768, F."/BIC/EV_DURAT",
                                                          695029006, F."/BIC/EV_DURAT",
                                                          695029007, F."/BIC/EV_DURAT",
                                                          695036746, F."/BIC/EV_DURAT", 0) AS T4
                      FROM "/BIC/VEVENT0608F" F,
                           Z_TMP G,
                           "/BIC/DEVENT06085" D
                      WHERE F."KEY_EVENT06088" = G.ID
                            AND F."KEY_EVENT06085" = D.DIMID
                            AND G.GROUP_NO = :p_GROUP
                            AND ( F."/BIC/EV_COST" < 0 OR F."/BIC/EV_A_COST" < 0 )
                            AND D.SID_EVENTTYPE <> 695030676 AND D.SID_EVENTTYPE <> 695030678
                    UNION
                    SELECT F."KEY_EVNA06088" AS T1,
                            F."/BIC/EV_COST" + F."/BIC/EV_A_COST" AS T2,
                            DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_COST") +
                              DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_A_COST") AS T3,
                            DECODE( D.SID_EVENTTYPE, 23147, F."/BIC/EV_DURAT",
                                                          23148, F."/BIC/EV_DURAT",
                                                          23151, F."/BIC/EV_DURAT",
                                                          23153, F."/BIC/EV_DURAT",
                                                          23157, F."/BIC/EV_DURAT",
                                                          23159, F."/BIC/EV_DURAT",
                                                          24896734, F."/BIC/EV_DURAT",
                                                          695032768, F."/BIC/EV_DURAT",
                                                          695029006, F."/BIC/EV_DURAT",
                                                          695029007, F."/BIC/EV_DURAT",
                                                          695036746, F."/BIC/EV_DURAT", 0) AS T4
                    FROM "/BIC/VEVNA0608F" F,
                         Z_TMP G,
                         "/BIC/DEVNA06085" D
                    WHERE F."KEY_EVNA06088" = G.ID
                          AND F."KEY_EVNA06085" = D.DIMID
                          AND G.GROUP_NO = :p_GROUP
                          AND ( F."/BIC/EV_COST" < 0 OR F."/BIC/EV_A_COST" < 0 )
                          AND D.SID_EVENTTYPE <> 695030676 AND D.SID_EVENTTYPE <> 695030678
                 ) T
            GROUP BY T.T1

  • TS3694 "There is a problem with your iPhone." (Restoring/Recovery issues)

    So, the other day, I got my iPhone 4 wet (idiot, I know!).  After drying it out in a bowl of rice for 24 hours, it seemed to start up just fine and when connected to iTunes, it prompted me to do a full restore to factory settings. I did just that, and after the restore software downloaded and seemed to install onto the iPhone, it began going through the setup process.  It let me go through a few screens of setup (language, country, location services etc., before showing the connect to iTunes screen). Then iTunes displayed this message:
         "There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other      processes in your country. To find your nearest Apple Store, click here."
    There are no other options given on neither the phone nor iTunes.
    I am out of warranty, have called Apple about replacement options, and was also advised to continue trying to restore.  After 3 or 4 times trying to restore, with the same message, I am asking if anyone knows any other tricks before I go and fork out $169.99 for a replacement phone.
    Thanks,
    Mike

    Hii mikeszalay,
    I have exactly same issue, and my screen can show language and country after I restored for like 7 times.
    My itunes is showing
    "There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here."
    What did you do after this problem? did you successfully fix the phone? Cause I dont know what to do now, and my phone is also out of warranty : (( It will be a really great help if you could share experience!!
    Thank you so much!!!

  • Problem with versioning on iPod, backwards compatibility issue with iTunes

    i apologize in advance because i'm sure this has been asked time and time again, but i did attempt several searches.
    the search function is very muddled and does not narrow down the results very well at all
    here's the situation.
    from all accounts i've heard lots of people having issues with version 7 of iTunes.
    i'm a simple kinda guy who definitely believes in the age old phrase "if it ain't broke, don't fix it."
    so i've stuck with v6.
    i recently got a new laptop along with my PC. so i downloaded and installed the latest iTunes without thinking twice.
    i had completely forgotten about my concerns from hear say about v7 issues.
    i plugged in my iPod and it proceeded to completely erase all of the media on it and then load all media that was on my laptop in place of it.
    "well that's a cool new feature", i thought.
    after my initial frustration wore off, i immediately uninstalled v7, deleted the .itl file and installed v6.
    everything was all fine and dandy. v6 works perfectly on the laptop with no hangups.
    here comes the issue...
    i plug in my iPod to begin rebuilding my media onto it after the completely unauthorized deletion, creditted to iTunes v7.
    as it autoplays and iTunes v6 opens i'm prompted with this error:
    "The iPod [my ipod] cannot be used because it requires iTunes version 7.0 or later.
    Go to www.itunes.com to download the latest version of iTunes."
    i've attempted everything i can think of to completely erase my iPod of any "versioning".
    - i reset it using the "select/menu" button method
    - i reformatted it through XP disk manager
    - i reformatted it through context menu in my computer explorer window
    - i completely just deleted the "iPod control" directory in the iPod explorer window when clicking through the my computer directory
    i'm at a loss.
    i cannot figure out a way to get my iPod to function with iTunes v6.
    and again, i'm really hoping to avoid going to v7.
    iPod information:
    2nd generation iPod nano 4GB
    thank you in advance for any and all information/advice

    I am guessing that you used your iPod enough with iTunes v. 7.x to update the firmware to the latest version. That being the case, reformatting your iPod won't "undo" the firmware update, so your only choice now is to update your iTunes software to v. 7.x.
    FWIW, iTunes 7 is a vast improvement over previous versions of iTunes. I use it on both Windows and OS X, and without bugs in both environments.

  • Satellite P100-324: Problems with Vista installation - cursor blinking

    All greetings. Tried to put one of these days Windows Vista. But my attempts by failure have ended. After the first ???????????? there is a black screen and the blinking cursor. Thus any activity HDD and DVD it is not observed. BIOS recently updated up to v3.30. Help to put, already and I do not know what to think up.
    For English I apologize, I from Russia:)

    The disk "With" was formatted under NTFS then there was a pure installation from a loading disk through BIOS. At the start the computer starts to be loaded, and reaching a place where there should be a window of loading there is a black screen with the blinking cursor in the top left corner. Tried to wait for 10-15 mines, results has not brought.: (

  • Problems with screen tilting and zooming

    I've been using my touch for web browsing quite a bit.
    One persistently annoying problem I keep having is switching between the touch and other devices. The problem is not unique to any platform. It happens on my iMac at home and the XP laptop at work.
    Whenever I browse an web page on my touch I do things like:
    - double tap to zoom text to just the right size
    - flip the device back and forth between horizontal and vertical to make whatever content I'm looking at fit the screen better.
    Overall, I'm very pleased with web viewing on the touch, but whenever I view web content on my iMac or PC, I keep having issues:
    - double tapping on the screen doesn't work. I usually remember that it isn't a touch screen and use the mouse, but double clicking ona web page never does anything but select text or open a new page.
    - flipping the iMac or XP laptop on its side doesn't seem to have any effect on things inside the machine, but frequently has disruptive effects on the surroundings. The XP laptop has so many cables plugged in that when I grab the screen & rotate I inevitablly disconnect something or yank the speakers off the desk. It just plain doesn't work on the iMac as there really isn't any room on my desk. I think I'll go check Ikea's web site for firmware updates on the desk.
    It just seems like the iMac and PC aren't working in a natural way like the touch. I have noticed it usually happens right after I'm using my touch. Maybe I should update the firmware on the iMac or PC? Has anyone had the 1.1.2 update show up for their iMac or PC? (or desk?)
    Is anyone else having these issues?

    Hi and welcome to the discussions!
    I agree with Barbara. That is unacceptable.
    Did they have you try to create a new user account or perform an archive and install? If the problem happens in all apps, or when just the Finder is open, it is either an OS issue, or more likely a hardware problem such as bad video on the midplane. An archive and install or creating a new users account can help eliminate software as a possibility and are two of the steps that Apple almost always suggests when their is odd behavior similar to what you describe.
    Also, try shutting down and unplugging all cables fromyour iMac - including the wall - for 15 minutes. Then plug in the power cord while simultaneously pressing and holding the power button on the back of the computer. Let go of the power button and press the power button once more to start up your iMac. That would reset the SMU.
    Another thing to try before calling them again is to reset the PRAM.
    - Shut down the computer.
    - Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    - Turn on the computer.
    - Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    - Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    - Release the keys.
    Your computer's PRAM and the NVRAM are reset to the default values. it might reset date and time settings, but that is not fatal.
    I honestly do not think that any of what I suggest will make a difference, but it will eliminate a great number of possibilities. I think it is either a bad backlight or bad video, but that is just a guess.
    Give those a shot and call Apple back. Then you can tell them what you have done and they will probably recommend that you take it in to an Apple repair center for further diagnostics.

  • Problem with "Next Page" And "Zoom" in CrystalReportViewer With VS 2010

    Hello,
    i am using crystal report v 13 sp1 with visual studio 2010,
    As mebtioned, the next page and the zoom is not working in my report, whiwh has as data source "Stored Procedure"
    This is my code, and i think it's correct, i was using this code in previous versions of crystal report (cr10) and it worked fine,
    When i used the Data set , the next page and zoom worked fine, but with stored procedure it doesn't work,
    Note: when i open the Tree of Data on the left, then click on the next page or the zoom, it become funtional, it's very weird,
    protected void *Page_Init*(object sender, EventArgs e)
    if (!IsPostBack)
    reportDocument = (ReportDocument)this.Page.Session ["_reportDocument"];
    if (reportDocument != null)
    string rptFile = reportDocument.FileName.Split('
    ', '/').Last();
    LoadReportRessource(reportDocument);
    TableLogOnInfo log = new TableLogOnInfo();
    ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0]; //la premiere connectionstring
    SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
    log.ConnectionInfo.ServerName = SConn.DataSource;
    log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
    log.ConnectionInfo.UserID = SConn.UserID;
    log.ConnectionInfo.Password = SConn.Password;
    log.ConnectionInfo.Type = ConnectionInfoType.SQL;
    for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
    reportDocument.Database.Tables.ApplyLogOnInfo(log);
    for (int i = 0; i < CrystalReportViewer1.LogOnInfo.Count; i++)
    CrystalReportViewer1.LogOnInfo.ConnectionInfo = log.ConnectionInfo;
    CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session ["_paramFields"];
    CrystalReportViewer1.ReportSource = reportDocument;
    CrystalReportViewer1.DataBind();
    CrystalReportViewer1.ShowFirstPage();
    else
    CrystalReportViewer1.ReportSource = (ReportDocument)this.Page.Session ["_reportDocument"] ;
    Edited by: Soumaya on Sep 7, 2011 6:16 PM

    @Don:
    Sorry, but i donno what do you mean by "what is the App Pool running in 32 or 64 bit?",
    i am running the application locally, ( the IIS is installed locally ),
    as i told you, my OS is 64bit,
    And yes i tried a very simple report, with just one field , and the "next button" is also not working,
    Its only not working with stored procedure, in the others methods ( push or pull method is working fine)
    i think its a problem in refreshing page, because when i open the tree on the left, then click on next page or zoom, its works fine
    @Ludek:
    i changed my code as below, and it doesn't solve my problem:
            ReportDocument reportDocument;
            protected void Page_Init(object sender, EventArgs e)
                if (!IsPostBack)
                    reportDocument = (ReportDocument)this.Page.Session["_reportDocument"];
                    if (reportDocument != null)
                        string rptFile = reportDocument.FileName.Split('
    ', '/').Last();
                            TableLogOnInfo log = new TableLogOnInfo();
                            ConnectionStringSettings conn = WebConfigurationManager.ConnectionStrings[0];
                            SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(conn.ConnectionString);
                            log.ConnectionInfo.ServerName = SConn.DataSource;
                            log.ConnectionInfo.DatabaseName = SConn.InitialCatalog;
                            log.ConnectionInfo.UserID = SConn.UserID;
                            log.ConnectionInfo.Password = SConn.Password;
                            log.ConnectionInfo.Type = ConnectionInfoType.SQL;
                            for (int i = 0; i < reportDocument.Database.Tables.Count; i++)
                                reportDocument.Database.Tables<i>.ApplyLogOnInfo(log);
                        this.Page.Session["_reportDocument"] = reportDocument;
                        CrystalReportViewer1.ParameterFieldInfo = (ParameterFields)this.Page.Session["_paramFields"];
                        CrystalReportViewer1.ReportSource = reportDocument;
                        CrystalReportViewer1.ShowFirstPage();
                else
                    CrystalReportViewer1.ReportSource = this.Page.Session["_reportDocument"];
    Edited by: Soumaya on Sep 8, 2011 10:39 AM

  • Problem with Bridge CS6 and zooming to 100%

    When I click on a file to zoom to 100% it zooms to 800%. I had the same problem in CS5 and fixed it by deleting the com.adobe.bridge.plist, but this does not work with CS6 and I don't even find the plist. I have a Mac with OS X 10.8.2. I found two plists, com.adobe.CSXS.3 and com.adobe.CSXS2Preferences but it didn't fix the problem deleting them.
    I use the zoom function alot and would be very grateful if someone could help me. I do not like the preview workspace with the little 100% window, I prefer zooming to 100% by clicking on the file.

    It does not work on a Mac, and they have only one set og +/-, at least my Macbook Pro has.
    That is a bit strange, it always has worked for that way on both my Mac Pro and my MacBook.
    I can use the scroll wheel on my mouse to enlarge the 100 % preview from loupe in preview window to 200, 400 and 800% but also the + and - keys from both my qwerty key board and the number pad of my extended keyboard for the same result.
    Hitting tab for full screen preview I don't even have to click, both aforementioned + and - keys set to 100%, 200, 400 and 800% as well my scroll wheel.
    All those methods work on both MacPro and MacBook.

  • Banding problems with CS3 at 100% zoom

    Just upgraded from CS2 to CS3: I always shoot in RAW, then zoom in 100% in RAW converter to check quality. I also work in 16 bit and using CS2 the tonal gradation is brilliant. However the same photo opened with CS3 Bridge shows banding when I zoom in. Same happens when I convert and open the image in Photoshop. Great in CS2, banding appears in CS3.
    Anyone else having this problem?

    Thanks for the reply Christopher. I did check colour settings, but good idea. I'm happy to say I've resolved it myself, having wasted 2 days with the Adobe support line.
    Figured it had to be something to do with the screen so changed to a higher resolution and that seemed to cure it. Even so, I thought somethings not right. Read the 'Readme' notes more carefully and spotted the paragraph about updating my graphics card driver. I did this and now seems to be working fine.

  • Problem with iphone 5 camera zoom

    I recently upgraded to iphone 5.   What is up with the zoom on the camera?  I focused in on one object and the camera took a totally different picture. After looking at support posts, I now know I can turn phone off/on and then it works.  But was there ever a fix?

    I find my problem.

  • Problems with G5-Need Help Narrowing Down Issue

    I have I PowerMac G5 dual 2.0 GHz from the June 2004 bracket and am having issues getting it to turn on. When I press the power button I will get one of three results. One: the light will come on when pressed, the fans will rev and I can hear the hear drive start to work, but the power light will go back out after a second or two while the fans still spin. Second: the power button is depressed and no light comes on but the fans, hard drive start up, etc. Third but least common is that the power button is depressed and it will come on as normal, boot up just fine and I'm able to use the computer-going as far as running apps and games with no problem. I've taken the steps mentioned in other threads such as resetting the PSU, swapping batteries, reseating video card/RAM but the results with start up are varied so much as to I can't tell what (if anything) is helping. I don't know if it's power supply issue (because the fans and other things seem to work fine) or a motherboard issue (but that wouldn't explain why it works fine when it wants to). I'm stuck. Any help is greatl appreciated.

    Hi fiveinchwrench-
    Usually this problem is either a power supply or mother board. It sounds more like a power supply to me but there is no way to tell from here.
    It may be worth taking it to an Authorized Apple Repair Center for a diagnosis. Both a power supply and a mother board will probably be in short supply, but the power supply will by far be the cheaper component.
    Luck-
    -DaddyPaycheck

  • Problem with panelbox and af:table scrollbar issue and panelstretchlayout

    Hi,
    <af:panelStretchLayout >
    <f:facet name="center">
    <af:panelSplitter orientation="vertical" positionedFromEnd="true" inlineStyle="vertical-align:inherit;">
    <f:facet name="first">
    <af:subform default="false" id="xyz">
    <af:panelBox background="light" text="Advance Search" inlineStyle="color:InactiveCaption;" type="default">
    <af:panelGroupLayout layout="scroll">
    <af:commandButton text="Search" id="advSearch" actionListener="#{ADFStandardsLeftMenu.getAdvancedSearchData}"/>
    <af:spacer width="20"/>
    <af:commandLink text="Search Tips" id="searchtips2" inlineStyle="font-weight:bold;" partialSubmit="true" clientComponent="true">
    <af:showPopupBehavior triggerType="click" align="afterEnd" popupId="advSearchPopupId"/>
    </af:commandLink>
    </af:panelGroupLayout>
    </af:panelBox>
    </af:subform>
    </f:facet>
    <f:facet name="second">
    <af:panelBox background="light" text="Basic Search" inlineStyle="color:InactiveCaption;" type="default">
    <af:spacer height="20"/>
    <af:panelGroupLayout layout="scroll" >
    --- some inputtext command buttion, dropdowns...selectonechoice..are there inside this
    </af:panelGroupLayout>
    </af:panelBox>
    </f:facet>
    </af:panelSplitter>
    </f:facet>
    </af:panelStretchLayout>
    problem:
    (we have 2 panels) of vertical
    when i run this application it is working fine. But when we minimise the browser(half size) or if we add more no of toolbars in browser (important) obviously browser size will decrease,
    that time 1 panel getting decreased second panel is maintaing fixed size, not resizing.
    I tried to give fixed size (percentage) for both panels wt ever the operation does.
    and 2nd issue
    ========
    <af:panelStretchLayout>
    <f:facet name="center">
    <af:panelSplitter orientation="vertical"
    positionedFromEnd="true" >
    <af:panelBox background="light" text="Search For Standards" inlineStyle="color:InactiveCaption;vertical-align:50%;" >
    <af:table value="#{ADFStandardsLeftMenu.mostCommonAgencySelectedList}"
    id="t1" width="100%" var="stdURL"
    emptyText="<html><b><font color='red'><center>No Records Found</center></font></center></b></html>"
    disableColumnReordering="true"
    columnSelection="multiple"
    rowSelection="multiple"
    inlineStyle="text-align:left;"
    verticalGridVisible="true"
    horizontalGridVisible="true">
    <af:column>
    </af:column>
    ---- we have more 8-10 columns
    </af:table>
    </af:panelbox>
    </af:panelsplitter>
    </f:facet>
    </af:panelstretchlayout>
    problem: that time im getting by default horizontal and vertical scrollbar, but if user add toolbars in browser (view->customize)add toolbar no of say 10-15 that time window size decreasing
    so, table size is crossing panelbox size, and bottom scrollbar is not visible (hiding under site bottom layout say site is divided into 4 parts (leftmenu, body(2 panels), right, bottom) (im not using any right layout)
    regards,
    sandeep

    Hi,
    if minimises browser window(half) or by adding more no of toolbars, i given an option as panelgrouplayout layout=scroll.
    it is working fine for 1st panel.
    but 2nd panel scrollbar not coming.
    thanks in adv.
    regards,
    sandeep

  • Problem with LIKE in Cursor

    I have table week_tab with data
    week_num bkg1 bkg2 bkg_type
    1     10     20     at_prod
    2     40     10     at_serv
    3     30     20     prod
    2     20     60     at_prod
    1     10     50     at_serv
    1     20     80     at_net
    3     10     30     at_net
    I'm trying to put this query in a cursor
    SELECT SUM(bkg2), bkg_type
    FROM week_tab
    WHERE bkg_type LIKE 'at%'
    GROUP BY bkg_type;
    PROCEDURE get_bkg_tot(
    p_colName IN VARCHAR2,
    p_refCursor OUT ref_cursor) AS
    v_query VARCHAR2(4000);
    BEGIN
    v_query := 'select sum('||p_colName||'), bkg_type
    from week_tab
    where bkg_type like : x
    group by bkg_type';
    OPEN p_refcursor FOR v_query USING 'at%';
    END;
    PROCEDURE get_total_val AS
    v_refCursor ref_cursor;
    v_sum NUMBER;
    v_week NUMBER;
    v_total NUMBER := 0;
    v_colName STRARRAY := STRARRAY ('BKG1','BKG2');
    BEGIN
    FOR i IN v_colName.FIRST .. v_colName.LAST LOOP
    get_bkg_tot ('bkg2', v_refcursor);
    LOOP
    FETCH v_refCursor
    INTO v_sum, v_week;
    EXIT WHEN v_refcursor%NOTFOUND;
    v_total := v_total + v_sum;
    DBMS_OUTPUT.PUT_LINE ('Week '|| v_week||' : '|| v_sum);
    END LOOP;
    DBMS_OUTPUT.PUT_LINE ('Total Bookings Sale :'|| v_total);
    END LOOP;
    END get_total_val;
    When I tried to execute get_total_val, I'm getting
    ORA-01722: invalid number
    ORA-06512: at "SCOTT.GET_TOTAL", line 45
    ORA-06512: at line 2
    What could be the error?
    Thanks in advance

    Hi,
    After corrected fetch into clause...
    CREATE OR REPLACE PACKAGE BODY GET_TOTAL AS
       PROCEDURE get_week_total(p_colName   IN VARCHAR2,
                                p_refCursor OUT ref_cursor) AS
          v_query VARCHAR2(4000);
       BEGIN
          v_query := 'SELECT SUM(' || p_colName ||
                     '), week_num FROM week_tab GROUP BY week_num ORDER BY week_num';
          OPEN p_refcursor FOR v_query;
       END get_week_total;
       PROCEDURE get_bkg_tot(p_colName   IN VARCHAR2,
                             p_refCursor OUT ref_cursor) AS
          v_query VARCHAR2(4000);
       BEGIN
          v_query := 'select sum(' || p_colName || '), WEEK_NUM ';
          v_query := v_query || 'from week_tab ';
          v_query := v_query || 'where bkg_type like :x ';
          v_query := v_query || 'group by week_num';
          OPEN p_refcursor FOR v_query
             USING 'at%';
       END;
       PROCEDURE get_total_val AS
          v_refCursor ref_cursor;
          v_sum       NUMBER;
          v_week      NUMBER;
          v_total     NUMBER := 0;
          v_colName   STRARRAY := STRARRAY('BKG1',
                                           'BKG2');
       BEGIN
          FOR i IN v_colName.FIRST .. v_colName.LAST LOOP
             get_bkg_tot(v_colName(i),
                         v_refcursor);
             LOOP
                FETCH v_refCursor
                   INTO v_sum, v_week;
                EXIT WHEN v_refcursor%NOTFOUND;
                v_total := v_total + v_sum;
                DBMS_OUTPUT.PUT_LINE('Week ' || v_week || ' : ' || v_sum);
             END LOOP;
             DBMS_OUTPUT.PUT_LINE('Total Bookings Sale :' || v_total);
          END LOOP;
       END get_total_val;
    END GET_TOTAL;The output is:
    Week 1 : 40
    Week 2 : 60
    Week 3 : 10
    Total Bookings Sale :110
    Week 1 : 150
    Week 2 : 70
    Week 3 : 30
    Total Bookings Sale :360Regards,

Maybe you are looking for

  • MM configurations for SAP AFS System

    Hi,         I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for

  • What is the feature of BB Q5?

    What is the feature of BB Q5?

  • Office 2008 Setup Assistant Loop for one user, but not for another

    I just upgraded my MacBook Pro to a MacBook Air and migrated everything across using Migration Assistant via WiFi. Seems to have gone fine but found that my wife can't get any Office 2008 apps to start up. Word, Excel, etc start up in my account with

  • HELP!  mounting laptop as external drive

    I just bought my Macbook Pro (used) and I want to mount it as an external drive from my old G4 running on OSX 10.3.9 I have a firewire cable to link them but I don't know how to launch either one on the other desktop. HELP!!

  • Idoc Message type & Basic type

    Hi All, Can any one tell me what is the  <b>Message type & Basic type(idoc type)</b> of <b>Goods received</b> for inbound & outbound Thanks Sunil