Problem with Outbound Interface for Party in Standard XI Content for SNC
Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman
Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta
Similar Messages
-
Hi !
I just installed Dreamweaver CS4 on my new Macbook Pro. I used to use Dreamweaver CS4 on Windows. But, I have a problem with the interface on my macbook : when dreamweaver is running, I can see my desktop : there is no background like in a MDI application (on windows). To illustrate my problem, I took two screenshots :
on mac :
and on windows :
So, I would like to know how to have the same interface with Mac OS X than with Windows.
Thanx for your help and sorry for my english but i'm french.Click the green zoom (+) button in the top-left corner of the window to switch between a larger and smaller window size.
Depending on the active application it either fills the entire screen or zooms to the size of the last largest size of the window that you set yourself by dragging bottom righthand corner to desired size.
Photoshop has various ways to hide the Desktop. Either by using the Application frame (which doesn't neccessarily hide the entire Desktop) or by pressing the key F. Wanted by PC users but usually not by Mac users. (I would personaly never use it as it obscures the Desktop so you cannot easily reach other applications and documents by just clicking them to call them into the front and get active).
DW doesn't have an application frame but it is easy enough to fill the entire screen with the active window, particularly if you open up a few panels and dock them to each other and use Split screen view with code on one size and design on the other, then place various bars at top and bottom. When you have organized it to your liking, save it as a Workspace (Window/Workspace Layout/New Workspace) and you have it handy for future use.
Learn how to use the windows and workspaces in an efficient way and one of these days you might get used to it... -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..
The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries. -
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
Not able to access Itunes store anymore. Just quit working for no reason. I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". Not sure what this message means. Am I suppose to contact Apple ? What is meant by package vendor ?
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.
Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I got the iPod touch, when i went to connect it to my computer to upload my music to it, It said that I need to upgrade to 10.5 but when I did I got the message below. So I tried uninstalling itunes and quick time and I cant download it at all and still get the message below. I have NO itunes on my computer now. =(
The message I get is::
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
I have no idea what this message means or what to do....There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Apple Software Update 2.1.3.127 will not install i keep getting the error
“There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personnel package vendor. ”
i have tried to uninstall itunes and reinstall and i can not get it to installTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows
Maybe you are looking for
-
Tuning sql with analytic function
Dear friends I've developed one sql : with REP as (select /*+ MATERIALIZE */ branch_code, row_number() over(partition by branch_code, account order by bkg_date desc ) R, account, bkg_date, lcy_closing_bal from histo
-
Can we see the code of GUI UDF functions
Hi All, Can we see the code of GUI UDF functions? Which language it has been written? Cheers! Samarjit
-
How to find the existing START ROUTINEs in Transfer Rules in whole system ?
Hi all, How to find the existing Start Routines in Transfer Rules in BW System, please ? I know that we could find from the Transfer Rules. Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource? Thanks, Ven
-
Hi everyone! I have this ALV Tree report and need to implement the Footer on the end of the report. Did you already have the same problem? I am open for suggestions... Thanks in advance, Leandro
-
Migrate user data from SLES10sp3 OES2sp3 to new hardware (again)
Hi, I am running SLES10sp3_64 with OES2sp3_64 and need to migrate the user data to a new server running the same OS. I have also updated the SLES & OES to the maintenance pack of November 2011. The miggui authenticates and I can select the folders fo