Problem with outgoing email on Outlook Express 6

I am getting the following error message when attempting to send email:
The message could not be sent because the server rejected the sender's e-mail address. The sender's ...
I have done the Verizon checkup and used the "helper" to no avail. My settings are configured as the tutorial detailed. I need help! Thanks!

For the sake of example, we are going to pretend that we are setting up fictional account "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: incoming.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 110
Outgoing Server: outgoing.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): No
Port: 25 (although 587 also works.)
These settings should work unless you have a Verizon/Yahoo account, in which case the server names are: incoming.yahoo.verizon.net -and- outgoing.yahoo.verizon.net
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

POP Mail - Go Daddy: Problem with outgoing emails

I just set-up an email account on Go Daddy with my domain name. I want to use Mail as my client and followed all the instructions to set-up the POP mail in Preferences/Account.
The problem I have is with outgoing email which get rejected due to password not accepted. But the inconsistency is that I can receive email in Mail using the same password.
What's up here? Please help!

What is the precise error you are receiving from the server? Does it say it cannot authenticate with that username and password?
What do you have your SMTP server set as? Is it SMTPOUT.SECURESERVER.NET? If so, try these different ports.
SMTPOUT.SECURESERVER.NET:25
SMTPOUT.SECURESERVER.NET:80
SMTPOUT.SECURESERVER.NET:3535
It could be that your host does not allow you to send mail through SMTP servers other than theirs. If using the above servers and ports does not work, try your ISP's SMTP server.

Problems with outgoing email

I have problems with my outgoing email from my Icloud account. Ingoing emails are working fine. This problem started after I changed my HD. Any suggestions of what to do?

http://www.apple.com/support/mail/
has a setup guide to test your settings
http://support.apple.com/kb/TS3276
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons#/?tagSet=1386
You probably thought you were here:
https://discussions.apple.com/community/notebooks/macbook_pro

Problems with outgoing email on Y!Mail

The first week I used my free Yahoo email on the E61i I was fine. It's strange that I'm able to receive email from Yahoo, but I'm unable to send email out. I've tried everything from:
Outgoing:
smtp.mobile.mail.yahoo.com (worked for awhile)
smtp.mail.yahoo.com
smtp.next.mail.yahoo.com
I have 2 questions regarding this problem of mine...
Could the problem be from T-Mobile or Yahoo or perhaps both?
If I purchase Yahoo Mail Plus will I be able to send emails?
I'm trying not to use a third party email since it's not push email capable...so please help me.
thanks in advance,
jennifer

It worked for a while with the first server adress? is the ports correct?
usually if the server your using is not "open" you have to use your operators server for outgoing email. witch will send the mail first via your operators server and then trought your email.
i could be wrong here tho

Problem with outgoing email and 1.0.1

Outgoing email seems slower, especially with SSL enabled. I am configured with IMAP to exchange, BUT use smtp.dslextreme.com for outgoing. The email will send out but it will take over a minute. I did not have this problem with 1.0 and I had the same configuration with 1.0.

Well, i decided to use my gmail account for my outgoing smtp configuration and that works great, and with ssl. So i am going to say my problem is with dslextreme and use google for outgoing now. Thanks Apple, this phone kicks ***.

Problem with Outgoing Email

Hi,
My outgoing email was working until an issue last week.
I am using the following data & it doesnt seem to be working:
username
Outgoing.verizon.net
[email protected]
Port 587 (I did try port 25 also).
I checked login using my incoming...
Any ideas what I am missing using Outlook 2010 & it was working fine for weeks.
Thanks,
Rich

What error message do you get when you try to send an email? And receiving emails works, just not sending?
Did you change anything else in your account definition besides the port? And is the "My server requires authentication" box in the Outlook account definition still checked?
We need more information to help.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

How do i set an automatic spellcheck for every outgoing email in outlook express?

complete question above

Hi,
It depends on which email client/agent you are using
For Outlook: similar to other spell check in Office suite.
For Hotmail: try this
For Yahoo: try this
For Gmail: try this
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Set up Telstra email on Outlook Express (5.5 or 6.0)

This page will help you set up your Telstra email with Outlook.com on Outlook Express version 5.5 or 6.0.
Outlook is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Before you start
You'll need your Telstra email username and password.
Note: The setup and use of your email account may incur data use charges.
You may need to first turn on a POP Internet email protocol for your Outlook.com account (following Steps 1 to 5 below) – if your email app:
does not support Exchange ActiveSync or IMAP, but
does support POP3
If you're not sure, you should follow Steps 1 to 5 to check that the right settings have been applied.
Step 1
Sign in to your Outlook.com account
Step 2
Press the Options icon – and then press Options
Step 3
Under Managing your account, press Connect devices and apps with POP
Step 4
Under POP, select Enable
Step 5
Press Save
Then use the following settings in your email app.
Step 6
Open Outlook Express
If prompted to connect, press Work Offline
If any error messages appear, press the Hide button
Step 7
Open the Tools menu – and then select Accounts
Step 8
In the Internet Accounts window, select the Mail tab
Step 9
Press the Add button – and then select Mail.
Step 10: In the Display Name box, enter your name as you’d like it to appear in the emails you send – and then press the Next button
Step 11: In the Email address box, enter your full email address (ending in @bigpond.com or @bigpond.net.au)
Step 12: Press the Next button
Step 13: In the Email Server Names window, update the settings for your Outlook.com mailbox as follows:
My incoming server is a POP3 server
Incoming mail (POP3, IMAP, HTTP) server: Enter pop-mail.outlook.com
Outgoing mail (SMTP) server: Enter smtp-mail.outlook.com
Step 14
Press the Next button.
Step 15
In the Internet Mail Logon window:
Enter your full email address in the Account Name box
Enter your Telstra email account (case-sensitive) password in the Password box
Ensure the checkbox is NOT ticked for Log on using Secure Password Authentication (SPA)
Step 16
Press the Next button – and then press Finish to complete your setup.

Re: Set up Telstra email on Outlook Express (5.5 or 6.0)
Hello.
I bought my parents a new laptop. They insisted they couldnt access their bigpond email using it and have created an outlook account.email address, and now after reading this page I think I know why! They are now trying to import their old contacts. Can you advise? Their old email address was [email protected] and their new address is [email protected] Is that what they shouldve done? ie created a new email address?

Set up BigPond Email on Outlook Express (5.5 or 6.0)

This page will help you set up your BigPond® Email on Outlook Express version 5.5 or 6.0.
Outlook is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Before you start
You'll need your Telstra email username and password.
Note: The setup and use of your email account may incur data use charges.
Step 1
Open Outlook Express.
If prompted to connect, press Work Offline.
If any error messages appear, press the Hide
Step 2
Open the Tools menu and then select Accounts
Step 3
In the Internet Accounts window, select the Mail tab
Step 4
Press the Add button and then select Mail
Step 5
In the Display Name box, enter your name as you'd like it to appear in the emails you send and then press the Next button
Step 6
In the Email address box, enter your full email address (ending in @bigpond.com or @bigpond.net.au)
Step 7
Press the Next button
Step 8
In the Email Server Names window, update the settings for your mailbox as follows
My incoming server is a POP3 server
Incoming mail (POP3, IMAP, HTTP) server: Enter mail.bigpond.com
Outgoing mail (SMTP) server: Enter mail.bigpond.com.
Step 9
Press the Next button.
Step 10
In the Internet Mail Logon window:
Enter your full email address (ending in @bigpond.com or @bigpond.net.au”) in the Account Name
Enter your (case-sensitive) password in the Password box
Ensure that the checkbox is NOT ticked for Log on using Secure Password Authentication (SPA)
Security: This server requires a secure connection (SSL)
Step 11
It is critical to ensure that the checkbox here is ticked to indicate that the outgoing server requires authentication (most email clients don’t select this by default)
Use Secure Sockets Layer (SSL) with the POP and SMTP connection, and SMTP authentication for security.
Step 12
Press the Next button and then press Finish to complete your setup.

It doesn't address what I needed help with
I am trying to make my big pond address the secondary address on outlook and Microsoft says the reason I can't stems from big pond. Please change any settings that are preventing me from changing addresses through my outlook account. This is to assist my work / study /life. Thankyou.
Ferne O'Loughlin
[email protected]

Problems with POP email accounts set up on iPad air why can't I send emails?

I have an Ipad Air and am having problems with POP email account set up.
I can receive emails however I cannot reply or create a new email and send it.
Is there something I need to fix in Outgoing settings? these are the same as on my MacPro using same ISP provider Optus the only difference is that the Ipad has a prepaid sim card - however still with Optus.
Could someone help please? Thank you

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Email links (outlook express)

Windows XP.
Checking my emails via outlook express is fine with the exception of when links are contained within the email.
The source is fine as i know them, clicking on the web link within the email just freezes the outlook express, in fact the only cure is to restart the PC. This is something that has only just occured, but don't seem to fined any settings that might help......Using BTyahoo mail is fine, links work ok, its just when using outlook express.
any ideas please.

Have a look at this it might help
http://support.microsoft.com/kb/177054
Also check settings.
POP3
Server: mail.btinternet.com
Port: 995 (this should be automatically populated if you tick SSL Encryption)
SSL Encryption: Enabled
Username: your email address including the @btinternet or @btopenworld.com part
Password: your btinternet password
POP from folder: By default, POP will pull emails from your Inbox
SMTP
Outgoing Mail Server: mail.btinternet.com
Port: 465 (this may not be automatically populated on selection of SSL, so you'll need to check this)
SSL Encryption: Enabled

I'm having problems with excessive email usage on my iphone 4/ios 7. Just noticed that (settings/usage) it was using 900 mb. I deleted all my mail, deleted the mail account, and it still says it's using 661 mb. My ipad uses a fraction of that.

I'm having problems with excessive email usage on my iphone 4/ios 7. Just noticed that it (settings/usage) was using 900+ mb. I deleted all my mail, deleted the mail account, turned the phone off and back on, downloaded any remaining mail on the server to Outlook on my computer, and it still says it's using 661 mb. My ipad uses a fraction of that.
Background: I recently (December) bought an ipad and set up icloud for contacts and calendar, but NOT mail. My email provider is Verizon. I use computer, iphone, and ipad to check my email; eventually I download it from the server using Outlook on the computer and then delete any remaining emails from the phone and ipad. I can't find info on this problem anywhere.

Howdy there COUGAR444,
It sounds like your iPad all of a sudden seems to be restarting out of no where. If you haven't called AppleCare yet, I would start with quitting either the app that seems to be causing the issue, or all the apps if a single doesn't seem to be the culprit.
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes, then restore it as new and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

Issue with signatures viewed in outlook express

I have a signature I use containing business contact details etc, used in all emails.
If I send an email to a computer using outlook express the signature appears as normal.
If however I attach a attachment when viewed in outlook express the signature appears twice.
The second one below the first correct one but larger than the first. That's the main issue I need to solve but only appears if there's an attachment.
The same email received in mail on the Mac look ok though.
The second problem thats not really important but worth mentioning.
The first signature in the email in outlook express has a line above and below,
Again this doesn't appear if that same email is viewed in Mac mail.

Not an entirely satisfactory solution but changing to plain text seems to get around this problem.

Problems with incoming emails

After going through tons of support discussions and trying all that i could i would like to ask your help guys.
As header suggests im having problems with incoming emails on mac mail (4.6) (outgoing mails are working perfectly)
Yesterday evening i noticed that i cant receive emails (wheel just kept spinning without downloading anything but webmail and my phone mail app show that there are tons of unread emails)
Today around 10AM it worked for second (after messing around with settings (which i did not touched again) but when came back from lunch --- ***** not working again)
I checked that i have correct incoming & outgoing server names, correct passwords and all other settings like SSL (port995) are ok.
Confirmed from my Email Service Provider that their servers, my quota etc are working propperly
Mac mail Connection doctor does not show any red lights so it is ok
Someone said that "unable to load" can be caused by "corrupted" email and i should Rebuild my mailbox to see if if might show what message is f*** up. => did that and it just stays in "Fetching new email" and below reads "preparing to retrieve messages" and again nothing.
I tried to make new account in Mac mail client and it is not helping ... same thing Nothing.
I tried to install thunderbird and create new account in there, got it to work for first time i tried but result was the same ... it only downloaded some messages and stopped working.
Previously when i used to launch mac mail app on my laptop it always asked "do you want to connect to this server bla bla bla" => click ok and it downloaded everything but now i dont even get that pop-up message. (i think it disappeared after making account in thunderbird client and clicking "always trust" which did not help as it is still not downloading)
I would really appreciate your help cos im going mad with this problem and i cant get any help from my ESP
PS. im using POP settings.
Thank you in advance!
Jimi

Just remembered that i took printscreen from thunderbirds error when first attempted to set up new account. And now when looking at this it is the same message that i got every time when launching mac mail client. But as said this error went away after clicking "allways trust" (it does show my ESP name and due date is sept.2013")
And error message was
"Mail cant varify the identity of "autodiscover."mydomain"......".
The certificate for this server is invalid. You might be connecting to a server that is pretending to be "autodiscover....."
Jimi

Problem with outgoing email on Outlook Express 6

Similar Messages

Maybe you are looking for