Problem with PA30 event LIS1

Hi all,
I have a problem with PA30, I have three kind of subtyes, AS, CO, DI for a Z infotype, but I have a requirement, when I push the mountain(LIS1) list style for all subtypes, don't see the AS type, because the user does`'t need and is confused for him, but he need to see the 'AS' when he puts the subtype in the field of pa30, because he needs to create and delete it in some case, just when he push the LIS1 don't see it,
so the question is, is any way to do this ? I've been seeing by user exit and badis but the P9105 is a structure, so i can't get al the table to delete teh 'AS' or maybe have another name, or some place where it fill the table that display.
Some suggestions??
Please let me know.
Thanks a lot.

Explore dynpro 3000 of your Z infotype (MPnnnn00 report in se80)

Similar Messages

At event calendering site, getting message "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." Javascript is ENABLED on my computer.

I'm trying to submit an event to the events calendar at http://calendar.jtnews.net/events/index.php?com=submit. After I enter the Authentication words and press Enter, I get the message, "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." According to my Firefox/Tools, etc., button, Javascript is enabled. I

Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Problems with close event scripts and closing Photoshop

Hi!
We are having problems with close event scripts ("Cls ") when closing/quitting Photoshop.
The close event scripts are working without problem when closing an image. But when quitting Photoshop without having closed all images we are observing the following behaviour:
with CS2 the close event scripts are not triggered at all
with CS4 the close event scripts are triggered and executed correctly. But after that the Photshop process freezes. No visible GUI, you have to kill the process with the task manager.
I can reproduce this behaviour even with a small script consisting of a single alert('hello') and even an empty script. Is this an known bug or am I doing something wrong?
Thanks for your help!
Eric

Check your energy saver settings under system preferences. That is where you set sleep setting.

Problems with Repeating Events on Palm and iCal

Hi,
I'm having a problem with daily-repeating events entered into either my Palm or iCal. When I put events in my palm and sync them to iCal, the iCal calendars look right, but then the Palm events become truncated,i.e. only the first day of daily event will be visible. If I do nothing but just sync again, the events in iCal become weirdly duplicated, i.e. if an event had two repeats, the "original" occurrance will be there, along with a second, starting on next day of the series, lasting for the same number of repeats. Is there any way to make one calendar the overwriting calendar while using iSync? Or do you know of some other fix? This problem doesn't seem to affect other repeating events, either monthly or yearly.
Thanks
20" iMac with Intel Mac OS X (10.4.10) 500 GB HD, 2GB RAM 60GB Video iPod

As I just posted in another thread, there are a whole series of 'representation disconnects' between the Palm calendaring application and iCal.
While this article— iSync: About Syncing Recurrent Events Between iCal and Palm OS Based Devices—would lead to you believe that iSync is primarily the issue, it's not: this behavior occurs primarily because of the differences between the calendaring programs in each environment, and only secondarily because of the manner in which records are pushed and pulled by the synchronization framework.
iSync itself is simply another compliant sync client, and there is unfortunately no workaround for the issues delineated in the article.

Problem with halcyon event adapter

Can anyone help me with the following problem I have with the installation of the Halcyon Prime alert event action module on my SunMC 3.6.1 which is installed on a Solaris 10 zone.
Installation of Halcyon eventaction module 2.2.0b seems to be ok but if I try to add an new action the script tab stays empty.
I placed the scripts in the /var/opt/SUNWsymon/bin/HALEventAction file system with root as owner as described. Are there more reguirements ?
Thanks in advance.

It seems to be a problem with our console client.
The webstart method I used to start the console with has this problem.
The windows console client works fine.
Thanks anyway

Problems with KEY_UP event

I'm doing some work at the moment on a program and have noticed that it is (very occasionally) not registering KEY_UP events, which is causing major issues with my code. It never seems to do this with KEY_DOWN events.
Anyone had this problem before? Is it a known issue? Any help appreciated

Hi Martin,
Look at the following posts:
Help catching Control-K
Trapping ctrl k
It looks like you cannot trap this event. I also investigated with EventSpy and don't get any event in if I use Ctrl and any other character. If pressing CtrlShiftk you get KeyPressed = 34 and not 107 anymore as k is now uppercase because of shift.
Hope it helps,
Adele

Intermittent Problem with Business Event.

Hi,
I have a problem with a BES Event. My suspicions are that the event is intermittently nor firing. It's custom code subscribed to '*.apps.ar.hz.PersonProfileExtAttr.Update' (an EBS Person Profile Extensible Attribute Update).
In the first lines of the custom code an audit is written to a table. For some one the updates to the Extensible Attribute no audit is written.
The table HZ_PARAM_TAB is cleared for the item
Q: Is there a way to prove that the BES Event did/did not fire?
Thanks in Advance,
Kieran.

Kieran,
Never experienced any performance issues when setting this profile option. However, you may review the following documents.
Note: 280849.1 - How To Purge/Delete The Information From HZ_PARAM_TAB Table ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=280849.1
Note: 187275.1 - TCA API Callouts/Workflow 2.6 Business Event System: Performance Issue
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=187275.1
Note: 171703.1 - 11.5.x: Implementing Oracle Workflow Directory Service Synchronization
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=171703.1
Regards,
Hussein

Problem with Script Events Manager buttons not showing up

Hi,
First off let me say that the latest release of Adobe products is a steaming pile of @#$#$.
Countless software issues, it's slow, buggy, you name it.
That being said, has anyone had this problem and know how to fix it.
My Script Events Manager is broken. Yes broken. The only buttons I see are "Done" and "Remove". There is no "Add" button so that I can actually add events. Someone please tell me this is user error and that I don't need to reinstall PS.

My system has 8 Gb of Ram and 4 processors. I doubt it's the system. I've had problems with CS Master Collection since day one. My main complaint is the ******* tabs and interface. Everything is so chunky. CS2 was smooth as butter. They keep making their products use more RAM and it's ridiculous. The tabs don't help, they only make life harder.
Thanks for the suggestions, I was hoping not to have to reinstall PS, but looks like it's the only option.

Time zone compatability problem with timed event created on iOS and pushed to Windows7 Outlook calendar for sharing

Hi, I am in Jerusalem time zone. My Windows7 LAPTOP time zone is set to it (UTC+02:00 Jerusalem). My iPhone5 and iPad are both "Set Automatically" (ON) to Jerusalem. When I create any new event in my outlook on my Laptop it's generated with the Jerusalem time zone and pushed properly via iCloud to my iPhone and iPad. However when I create a new timed event on either my iPhone or iPad. or even in iCloud calendar (in a browser) the event is pushed to outlook on my Laptop in a "Beirut" time zone. Now that both Jerusalem and Beirut are on the same time zone (UTC + 02:00) it doesn't create any problem (though I prefer to see that the pushed events are indeed in Jerusalem time zone and not Beirut...). However, at and around day time saving change days there are problems of events created on iOS devices or even in iCloud (using browser) and pushed to outlook at the wrong times (1 hour earlier or later, depends on the change direction in Jerusalem time...) with a Beirut time stamp.
How can I resolve this problem and make sure all timed events, created on iOS devices at a Jerusalem time zone, appear as such after pushed via iCloud to my windows7 Outlook calendatr? Thanks!

I also have this issue (iPhone 5). Outlook needs to be configured properly in that timezone option needs to be selected. Which is challenging enough.
However the bigger issue for me is that when I open the ICN file:
1. I have no way to accept decline etc.
2. When the event is populating the calendar in the wrong time I can neither cut and paste nor select and move. It is totally static.
So for every meeting request I have to ensure it populates the right time as per my time zone. and if it doesnt i have to manually enter a second meeting 'X' hours earlier/later depending on which time zone the meeting was generated in.
I spoke to Apple. Their solution is make sure Outlook is properly configured. Fine...but good luck. I need a work around that is Apple based. Because this *****.
They said they would send to the development team. I am not holding my breath.

ICal 3.x .ics import - problem with recurring events and non-unique UIDs

Upgraded to Leopard over the holiday break. Under Tiger's iCal (v2.x), .ics files exported from other calendar programs (Outlook via iAppoint/O2M in this case) and imported into iCal behaved 'normally'. However, in iCal 3.x in Leopard, for recurring appointments in the exported calendar, only the last appointment in the series shows up in iCal (although some meetings show up for about 0.25 seconds during the calendar import, then immediately disappear! This post by MalcolmS provided the critical clue - it seems that for recurring events, the .ics file has all of the events in the series with the same UID. Previous versions of iCal didn't care, but v3 apparently does - and deletes all earlier versions of the event, leaving only the last one with that UID. I confirmed that is the case by opening the .ics file in Word, which clearly showed all of the recurring events, and all the events in a series (e.g. a weekly meeting for the year) had the same UID. After the import to iCal, only the last one is in the calendar (in the above example, the one meeting of the series occurring in the last week of December). Manually editing the UIDs of a recurring series in the .ics file (to make them actually unique) allows them to all show up in iCal after import.
Since many of the events in my Outlook calendar are accepted invites for recurring appointments, re-creating them as individual calendar events in Outlook is not a viable option. The frequency of changes to my calendar means I usually export it once per day (or twice); thus, manually editing the .ics files is also not a viable option.
Any suggestions on workarounds for this problem? Alternatively, any other suggestions for getting the calendar data from Outlook into iCal?
Thanks in advance!

Moot point, as direct iPhone access to the Exchange server is now supported by our IT department.

Problem with action events........ :(

hi all,
there is a strange problem which me and my colleagues are facing now-a-days......
For some odd and unknown reason, the links on the page suddenly stops woking... it goes like this....
we write events (buttons or action links) .... we test them and they are working fine...... than we write some other piece of code and than run the program and links work no more... The program never goes in the action event for the component...... and surprisingly it also dont show an error.... It just keeps on refreshing itself again and again....... (this thing is also verified by using debugger that actions events just stop being called....) it happens for random situations ...... Once i thought that maybe its has to do something with beforeRenderResponse() method... but it happens even in beans without beforeRenderResponse() method.....
Can anyone tell me whats going on around here???? we are extremely confused here with dead lines approaching fast........
regards

I've had this same problem....links were working fine yesterday. I added more functionality which didn't even affect the links, and now they're not working. Unfortunately, I don't have a solution either.
Has anybody been able to access the logging in the facescontext or application to see what the lifecycle is doing before it stops???

IE6 openModalDialog problems with applet events

Hi
I have an applet within an htm document whichich is opened from another web page using the openModalDialog method (or openModelessDialog).
The applet itself works fine, giving the desired result when I do an updateGrid(true). However, IE just hangs if I try to add an UPDATED event to the applet.
Any ideas?
Nick

Nick,
While Glenn's solution may seem to work it is not recommended to lock your application to a particular version of the Sun JRE client, especially one that is quite old and pre-dates the corrections to the changes in Daylight Savings Time.
The method you are trying to use must cause an issue where the combination of Internet Explorer and the Sun Plug-in don't play well together. I would imagine that some targeted Google searches should yield other discussions with people experiencing similar problems. Some of the version 12.0 menu pages with popups emulate a modal effect while using a more traditional window.open method, and this should work fine with IE/Sun, irregardless of version. If I recall correctly it uses a div that covers the area behind the popup window that stops you from clicking 'off' the popup. A Google search might also help you find some good samples of making a traditional window.open act as a modal too.
Regards,
Jeremy

ICloud sync problem with calendar Events on MBP and iPhone since last update. Some of my calendars appear to have either been deleted or merged.

I've noticed quite a few events have disappeared since the last update. Also my calendars appear to have either been deleted or merged. I've lost some very important events. Has anyone else had these problems?

Hi eddieishere,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999?viewlocale=en_US
Cheers,
- Judy

ALV: Problem with toolbar event

Hi ALV-experts,
I have a dynpro with a header area where I display an ALV table. Below this I have a subscreen with a tabstrip control and two tabs.
In the ALV toolbar I defined an own button. This button gets deactivated after pressing this button. I achieved this by the option "disabled" in the structure stb_button within the event handler for the toolbar event.
This works all fine so far. If I start the dynpro and click on the button in the ALV-toolbar the buttons gets deactivated afterwards. But I have I jump between the tabs before I press the ALV-toolbar button, the button does not get deactivated.
The debugger does not go into the event handler of the toolbar event. I also did system debugging of the method SET_TOOLBAR of the CL_GUI_ALV_GRID-class. Here I pass in both cases the command
raise event toolbar e_object = m_cl_toolbar e_interactive = i_interactive.
but in the second case (when I change the tabs before I press the button) the event handler is not executed and I don't know why. I also tried to register the event handler for all instances of the ALV still with the same result.
The ALV method set_toolbar_interactive( ) did also not solve the problem.
I couldn't find any SAP note about an issue for this event.
Does anybody have an idea or a solution for this problem?
EDIT:
Problem solved, it was typo!
Thanks in advance and regards,
Martin
Edited by: Martin Fischer on Jul 7, 2010 4:53 PM

The problem was a typo!

Problem with Embedded Event Manager and Object Tracking

Hi,
I have a 2801 running c2801-advipservicesk9-mz.124-24.T2.bin. It has the following configuration:
track 300 list boolean or
object 10
object 11
object 12
object 13
event manager applet clear_ipsec_tunnel
event track 300 state down
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
My problem is that after the tracked object number 300 transitions from an up state to a down state, nothing happens. It seems like the applet doesn't work with object tracking. Here's what I see in logs:
Dec 7 21:52:32.236 MCK: %TRACKING-5-STATE: 12 ip sla 12 reachability Up->Down
Dec 7 21:52:37.236 MCK: %TRACKING-5-STATE: 13 ip sla 13 reachability Up->Down
Dec 7 21:52:57.236 MCK: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
Dec 7 21:53:07.236 MCK: %TRACKING-5-STATE: 11 ip sla 11 reachability Up->Down
Dec 7 21:53:07.996 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
That's it. For some reason, the applet won't execute the CLI commands when the EEM applet is triggered. Am I doing something wrong or I have encountered some bug? Thanks.

jclarke,
Today I added the router into the tacacs server database and the applet started working just fine by using my login name. So the working configuration looks like this:
event manager session cli username "my login name"
event manager applet clear_ipsec_tunnel
event track 300 state down maxrun 30
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
Then I tried to use a login name from the local database that has "privelege 15" access and of course the debug output showed me this:
Dec 8 18:12:58.203 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
Dec 8 18:12:58.203 MCK: fh_track_object_changed: Track notification 300 state down
Dec 8 18:12:58.203 MCK: fh_fd_track_event_match: track ED pubinfo enqueue rc = 0
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: msg_type=64
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: sval=0
Dec 8 18:12:58.219 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_open called.
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>enable
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Command authorization failed.
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>clear crypto session
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : ^
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : % Invalid input detected at '^' marker.
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel: IPSec tunnel has been cleared by clear_ipsec_tunnel applet
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_close called.
So I guess this problem arises when you have command authorization enabled and the tacacs server is not reachable or something like that. I have tried to find a way to use the local database instead of using the aaa server but didn't succeed. Although I have found an interesting workaround. Here it is:
Link: http://blog.ioshints.info/2007/05/command-authorization-fails-with-eem.html
Workaround found after reading the "Executing IOS commands from Tcl shell" from the "Tclsh on Cisco IOS tutorial".
On the above article it is mentionned that the ios_config command is executed inside the context of another VTY line (also found with the AAA debug). The workaround is to define the FIRST VTY line with "transport input none" to prevent ssh or telnet to grab it and to configure the aaa authorization without any command authorization for this line.
Kind regards
Christian Chautems
Looks great, but I am not quite sure how to "configure the aaa authorization without any command authorization for this line".
Anyway, jclarke thank you so much for taking your time to look into my problem and for your help.

Problem with PA30 event LIS1

Similar Messages

Maybe you are looking for