Problem with Packaging Material Type

Hello all Gurus,
I have a problem with a packaging material type that I have created copying the standrad Packaging material type LEIH. I created a new packing material type ZPAC - Packaging Material copying LEIH.
I then created a new material master record using this new material type ZPAC.
When I am using this material for packing in outbound delivery document - VL01N, I am getting the following strange error message:
20333 does not have packaging material type and is therefore not a pack.mat.
Please suggest me why this error is coming and how I can rectify this error. Is there any further configuration that I need to do for packaging material types??? Kindly suggest.
Thanks and Regards,
Umakanth.

Hi,
Material type is not enough, you have to maintain proper master data as well as config.
At least please maintain value in MARA-VHART for the packaging material. Please also check these links how HUM works:
http://www.sap-img.com/sap-hu.htm
http://help.sap.com/saphelp_crm40/helpdata/en/c8/a44b779f3211d2858d0000e81ddea0/frameset.htm
Regards,
Csaba

Similar Messages

Create an external HU with different packaging material type

Hi All,
Iu2019m trying to create an external handling unit with the material below:
Packaging material: 2892
Packaging material type: Z501
Material Group: Packaging Materials: Z501
But the system creates de HU with the Packaging material type: 0001 instead Z501.
My question is.. How can I set the material or HU to take the Packaging material type Z501?
Thank you for your comments,
Jaime S.

My problem has been solved. Regards

Packaging material type-SU type

Hello to all
While manually packing / repacking HU for outbound delivery against customer order the error "Packaging materail type XXXX in warehouse ABC is not assigned to SU type"
On checking the customising setting at "Logistics General >HUM>Basics>WM>Assign Storage unit type to packaging material type" I found that there is no assignment of Pkg mat type to SU type.
Please confirm (as I am under the belief that this setting is relevant only when HU has to be automatically packed for moving into warehouse) if the above customising controls the error as I do not have access to test by changing the customisation.
Thanks
Prasad

Hi Prasad,
Even you do the manaul packing also. system checks the validation for SU type with HU type
regards,
Ramana

Can we increase the field length of Packaging material type description

Hi,
The field length allowed for packaging material type description is 20 characters. If i need to have this length to be increased to 25-30.Is it possible?
I mean the description that we give when we create new packaging material type.
Pls let me know ur suggestions.

Hi Dhilipan Nair,
Unfortunately there is no standard way to change this, the desc. field of the view (V_TVTY-VTEXT) is created from the value T685T-VTEXT which has been defined with the Domain TEXT20, so in order to add addition characters to this field, you would need to redefine the preceding field type.
Regards
Stephen

Defining Packaging Material Types

Hi all,
Pls help me to resolve this problem. I want to define Packaging Material Types. When I define the 3rd record. There is an error: Entry B 000001 does not exist in T683 (check entry). The point stand at OutputDet.Proc. field. The first and second record, i also enter the exact this value, but no error.
What do i do?
Thanks,

Dear Quang
1) Check in Material Master Sales: sales org.1 whether you have maintained Delivering Plant
2) Check in ovx6 whether plant is assigned to sales organization and distribution channel
3) Check in ovf0, whether you have assigned Business Area to Plant and Division
thanks
G. Lakshmipathi

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Packaging material type

I have created material using the material type VERP
this is a packaging material & I want to add packaging material type in the material master but i am not able to find this field there can you guys please tell me the exact view wherein i can mention the packaging material type

I have used Material type VERP for creating the material.
let me clarify 1 thing i.e. packaging material type and material type VERP are two different things
packaging material type is field in material master and its not the one which comes while creating the material as that is material type
and this is my packing material in which i want to pack the material X(FERT)
As per my understanding the Material X will carry the packaging material group and the packing material must carry the packaging material type becuase in the config (logistics execution> shipping> allowed packaging material type per material group) packaging material type is having certain allowed material group.
due to this config i can pack my material X only in certain type of packing materials

Packaging material type and packaging materials

Hello all,
I would like to know how to generate specific means of transport based on packaging material type and packaging materials.
Thanks,
Maxx

can we know answer for your qtn?

BDC for MM with different material types.

Hi, Can anyone explain me how the MM01 tcode can be handled in BDC, when material with different material types are present in the flat file. Different material types have different views and hence different recordings....How to handle this scenario?

Based on different types of material, you can able to find out which all views are required to call through BDC. Try to find out views by using tables MARA, MAKT, MARD, MARC etc. Once it is confirmed you can call views using screen numbers.
Here I don't think so more than one recording is required. Record MM01 transaction using Basic Data1, once you go inside the transaction select all the views required to complete the MM01 transaction. It will record all the views (hence screen numbers), then you can switch/call views based on screen numbers.
Hope this helps you to resolve your query.

ITunes Match: There was a problem with your payment type.

This Morning i received the following email from apple regarding my itunes match account.
I have no idea why this has happened, i am now worried of loosing all my music.
I have itunes match set for AUTORENEWAL, and there ist enough credit on my itunes store account.
Does anyone have an answer to this?
Would be greatful for help.
Thanks in advance
iTunes Match: There was a problem with your payment type.
There was a problem with your payment type that prevented the automatic renewal of your subscription to iTunes Match. To renew your subscription and to regain the ability to store your entire music collection on iCloud and enjoy it on your iOS devices, iTunes, and Apple TV, you will need to update your payment information. iTunes Match stores not only your songs purchased on the iTunes Store, but all of the other great music you have acquired over the years, including music from CDs.
To update your payment information or manage your subscription, sign in to iTunes on your computer and go to your Account Information page. Your matched and uploaded tracks will be removed from iCloud in 90 days, so renew your subscription now and keep all of your music in the cloud so you can listen to it anytime, anywhere.
Regards,
The iTunes Store team

I tried calling but they are closed in bservance of holiday. I want to resolve this issue now please via Internet so that I can resume my game. Thx very much for your help. Can u guide me thought this or email me the instructions as to how to resolve this step by step. It appears to me that there must have been a past billing issue.

Problem with setting oracle type parameter in viewobject query

Hi There,
I am facing a problem with JDev1013. I have a view that has JDBC positional parameters that are supposed to be in parameters for function like:
SELECT x.day, x.special_exact_period_only
FROM (
SELECT x.day, x.special_exact_period_only
FROM (
    SELECT
      x.day,
      rb.special_exact_period_only
FROM TABLE (
    RentabilityPkg.findMarkerSlots(
      'start',
      ? /* dchannel */,
      NULL,
      ? /* resorts */,
      'special',
      NULL,
      ? /* code */,
      NULL,
      TRUNC(SYSDATE),
      TRUNC(SYSDATE + 365 * 2),
      NULL
) x
    JOIN resourcebase rb USING (rentabilitymanager_id)
    UNION
    SELECT
      x.day,
      rb.special_exact_period_only
    FROM TABLE (
      RentabilityPkg.findMarkerSlots(
        'start',
        ? /* dchannel */,
        NULL,
        ? /* resorts */,
        'composition',
        NULL,
        ? /* code */,
        NULL,
        TRUNC(SYSDATE),
        TRUNC(SYSDATE + 365 * 2),
        NULL
    ) x
    JOIN resourcebase rb USING (rentabilitymanager_id)
)x
ORDER BY x.day
) x
WHERE ROWNUM <= 30now the JDBC positional parameters take our custom defined list type defined as:
CREATE TYPE NumberList AS TABLE OF NUMBER;
we are setting the parameter in the views with the help of oracle.sql.ARRAY class like:
   * Set parameters.
public void setParams(Integer dchannelId, Integer[] resorts, String specialCode)
    try {
          System.out.println(this.getClass() + ".setParams()");
          ARRAY arrParam1 = ((NWSApplicationModule)getApplicationModule()).toSQLNumberList(Arrays.asList(resorts));
          ARRAY arrParam2 = ((NWSApplicationModule)getApplicationModule()).toSQLNumberList(Arrays.asList(resorts));
          System.out.println("arrParam1 - " + arrParam1);
          System.out.println("arrParam1 - " + arrParam1);
          System.out.println(this.getClass() + " ARRAY - " + arrParam1.getArray());
          System.out.println(this.getClass() + " -- " + arrParam1.length());
          System.out.println("arrParam2 - " + arrParam2);
          System.out.println("arrParam2 - " + arrParam2);
          System.out.println(this.getClass() + " ARRAY - " + arrParam2.getArray());
          System.out.println(this.getClass() + " -- " + arrParam2.length());
          Object[] params =
               { dchannelId,
                    arrParam1,
                    specialCode,
                    dchannelId,
                    arrParam2,
                    specialCode
          setWhereClauseParams(params);
          System.out.println("DONE WITH " + this.getClass() + ".setParams()");
    catch(Exception ex)
          ex.printStackTrace(System.out);
}the toSQLNumberList() method is defined in our App module baseclass as follows:
public ARRAY toSQLNumberList(Collection coll)
       debug("toSQLNumberList()");
       DBTransaction txn = (DBTransaction)getTransaction();
       debug("txn - " + txn + " : " + txn.getClass());
       return NWSUtil.toSQLNumberList(coll, getConnection(txn));
public static ARRAY toSQLNumberList(Collection c, Connection connection)
    //printTrace();
    debug("toSQLNumberList()");
    try
      ArrayDescriptor numberList = ArrayDescriptor.createDescriptor("NUMBERLIST", connection);
      NUMBER[] elements = new NUMBER[c == null ? 0 : c.size()];
      if (elements.length > 0 )
        Iterator iter = c.iterator();
        for (int i = 0; iter.hasNext(); i++)
          elements[i] = new NUMBER(iter.next().toString());
      return new ARRAY(numberList, connection, elements);
    catch (Exception ex)
      ex.printStackTrace();
      return null;
protected Connection getConnection(DBTransaction dbTransaction)
    //return null;
    debug("Inside getConnection()");
    CallableStatement s = null;
    try
       * Getting Conenction in BC4J is dirty but its better
       * as otherwise we might end up coding with connections
       * and the Transaction Integrety will be
      s = dbTransaction.createCallableStatement("BEGIN NULL; END;", 0);
      debug("DOING s.getConnection()...");
      Connection conn = s.getConnection();
      debug("DONE WITH s.getConnection()...");
      /*try
            throw new Exception("TEST");
       catch (Exception ex)
            ex.printStackTrace(System.out);
      debug("conn CLASS - " + conn.getClass());
      return conn;
    catch (Exception ex)
      ex.printStackTrace();
      return null;
    finally
      try { s.close(); }
      catch (Exception ex) {}
}Whenever we try setting the parameters in view using setParams() and use this view to set the model of a java control it thorws the following exception :
[2006-10-10 12:34:48,797 AWT-EventQueue-0 ERROR] JBO-28302: Piggyback write error
oracle.jbo.PiggybackException: JBO-28302: Piggyback write error
     at oracle.jbo.common.PiggybackOutput.getPiggybackStream(PiggybackOutput.java:185)
     at oracle.jbo.common.JboServiceMessage.marshalRefs(JboServiceMessage.java:267)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:343)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:316)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2283)
     at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7509)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
     at oracle.jbo.server.remote.ejb.ServerApplicationModuleImpl.doMessage(ServerApplicationModuleImpl.java:79)
     at oracle.jbo.server.ejb.SessionBeanImpl.doMessage(SessionBeanImpl.java:474)
     at sun.reflect.GeneratedMethodAccessor7.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.StatefulSessionEJBObject.OC4J_invokeMethod(StatefulSessionEJBObject.java:840)
     at RemoteAMReservation_StatefulSessionBeanWrapper906.doMessage(RemoteAMReservation_StatefulSessionBeanWrapper906.java:286)
     at sun.reflect.GeneratedMethodAccessor63.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.io.NotSerializableException: oracle.jdbc.driver.T4CConnection
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1075)
     at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1369)
     at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1341)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
     at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069)
     at java.io.ObjectOutputStream.writeArray(ObjectOutputStream.java:1245)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1069)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
     at oracle.jbo.common.SvcMsgResponseValues.writeObject(SvcMsgResponseValues.java:116)
     at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
     at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
     at oracle.jbo.common.PiggybackOutput.getPiggybackStream(PiggybackOutput.java:173)
     at oracle.jbo.common.JboServiceMessage.marshalRefs(JboServiceMessage.java:267)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:343)
     at oracle.jbo.server.remote.PiggybackManager.marshalServiceMessage(PiggybackManager.java:316)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.processMessage(AbstractRemoteApplicationModuleImpl.java:2283)
     at oracle.jbo.server.ApplicationModuleImpl.doMessage(ApplicationModuleImpl.java:7509)
     at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.sync(AbstractRemoteApplicationModuleImpl.java:2221)
     at oracle.jbo.server.remote.ejb.ServerApplicationModuleImpl.doMessage(ServerApplicationModuleImpl.java:79)
     at oracle.jbo.server.ejb.SessionBeanImpl.doMessage(SessionBeanImpl.java:474)
     at sun.reflect.GeneratedMethodAccessor7.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
     at com.evermind.server.ejb.StatefulSessionEJBObject.OC4J_invokeMethod(StatefulSessionEJBObject.java:840)
     at RemoteAMReservation_StatefulSessionBeanWrapper906.doMessage(RemoteAMReservation_StatefulSessionBeanWrapper906.java:286)
     at sun.reflect.GeneratedMethodAccessor63.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)This is a typical interaction between 2 server-side components (view-object and app module). Now the question is why is this exception thrown? Any answers?
This application is one that we have migrated from 904 to 1013 and are trying to get it running in 3-tier.
Regards,
Anupam

Sorry I missed out some semicolons, the script follws:
-- The following TABLE was created to simulate the issue
CREATE TABLE TEST_OBJECT
     ASSET_ID NUMBER,
     OBJECT_ID NUMBER,
     NAME VARCHAR2(50)
INSERT INTO TEST_OBJECT VALUES(1,1,'AAA');
INSERT INTO TEST_OBJECT VALUES(2,2,'BBB');
INSERT INTO TEST_OBJECT VALUES(3,3,'CCC');
COMMIT;
SELECT * FROM TEST_OBJECT;
-- The following TYPES was created to simulate the issue
CREATE OR REPLACE
TYPE DUTYRESULTOBJECTTAB AS TABLE OF DUTYRESULTOBJECT;
CREATE OR REPLACE
type DutyResultObject as object
( ASSET_ID number,
OBJECT_ID number,
NAME varchar2(150)
-- The following PACKAGE N FUNCTION was created to simulate the issue
CREATE OR REPLACE PACKAGE TESTOBJECTPKG
IS
     FUNCTION OBJECTSEARCH(P_RESOURCE IN NUMBERLIST) RETURN DUTYRESULTOBJECTTAB;
END;
CREATE OR REPLACE PACKAGE BODY TESTOBJECTPKG
IS
     FUNCTION OBJECTSEARCH(P_RESOURCE IN NUMBERLIST) RETURN DUTYRESULTOBJECTTAB
     IS
       BULKDUTYRESULTOBJECTTAB DUTYRESULTOBJECTTAB;
     BEGIN
       SELECT DUTYRESULTOBJECT(ASSET_ID, OBJECT_ID, NAME)
       BULK COLLECT INTO BULKDUTYRESULTOBJECTTAB
       FROM TEST_OBJECT;
       RETURN BULKDUTYRESULTOBJECTTAB;
     END;
END;
[\code]

Problem with packageing and deploying a sample application

HI,
I have tried to download and install the server in my system. I am able to deploy a sample application using autodeploy utility.
But when i tried to package a new sample application and deploy i am getting 404 error. For application server i have used 7070 port and not the default 8080 port will this a problem to package & deploy sample application provided with this software.
The error is as below:
HTTP Status 404 - /hello1
type Status report
message /hello1
description The requested resource (/hello1) is not available.
Sun-Java-System/Application-Server

Btw, verify that the url you are trying to access is correct. For instance, assuming you deploy app. without --contextroot option. By default, the url is http://<host>:<port>/<web module name>/<value of url-pattern in web.xml> if your app contains servlet. If your app has jsp then it's http://<host>:<port>/<web module name>/<value of url-pattern in web.xml>/<name of jsp>

Problem with package in Eclipse

I am doing in Java codes. There is big problem with those error:
package org.eclipse.emf.ecore.xml.type.internal;What I should to do that? Do you think I need to download some package from somewhere for Eclipse?
I have already Eclipse. Please help me how to do that. Thanks.

I wrote codes in there. But there is some errors in there because they said that I don't have package exist in Eclipse. I have no idea why.
Those lists below got red line:
package org.eclipse.emf.ecore.xml.type.internal;
import org.eclipse.emf.common.util.WrappedException;
import org.eclipse.emf.ecore.xml.type.InvalidDatatypeValueException;
import org.eclipse.emf.ecore.xml.type.util.XMLTypeUtil;I tried to run it and the errors said:
InvalidDatatypeValueException cannot be resolved to a type.
The declared package "org.eclipse.emf.ecore.xml.type.internal" does not match excpected package"
The import org.eclipse cannot be resolved
WrappedException cannot be resolved to a type
XMLTypeUtil cannot be resolved{code}
What is wrong with it? Do you think there is missing plugin package or what? Where can I find a package for that?

RMDATIND uploading problem with external material numbers

Hi,
I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials.
I have a problem with uploading materials which have two types of external material numbers.
For example one material number is 1111-333 and then we have 10000000. The problem is that direct input won't create materials with number 1111-333 though it's possible to create them manually. It works fine with material 10000000.
Does anyone know how fix this issue?

Sweth123 wrote:
Hi Guys:
>
> Clicked check box External number assignment without Check., When I am creating a material (mm01) with only numeric characters it is giving me an eror message saying for this material type Numeric characters are not allowed.
>
> i should be able to create a material with external number range and it can be numeric or alpha numeric?
>
>
> Thanks
> Sweth
Hi,
go to the path Define Number Ranges for Each Material Type click on maintain groups & select the materila type & select the mouse on material type & click on maintain after that maintain the number ranges.
for ex: from 300000000 to 399999999 internal no.range
from A to ZZZZZZ external no.range
from this u can able to create a material with external number range and it can be numeric or alpha numeric
Regards
Raj.

Problem with multiple condition type for VAT &CST

Hi,Gurus,
pl. suggest the procedure for the following problem.we configured seperate pricing procedures for our product material and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
now I am facing the following problems.
1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of ZVAT/ZCST.
Now I would like to know is there any procedure to assign the Material type and Customer Account group to Tax category.
Thanks & Regards
sam

Hello Sam,
The Access Sequence Assigned to your New Condition types ie, ZSCT and ZSVT are same as the Previous Condition type ZVAT and ZCST.
After Adding new condition type in the Tax category in the Masters you have to take care of the Sequence of the Condition type.
If ZSCT and ZSVT is on the 3rd and 4th number in the masters the Condition table you are using in the access sequence should have fields Taxclassification3-Customer and taxclassification3- material. For ZSCT
Likewise Taxclassification4-Customer and taxclassification4- material. For ZSVT
Please add New Condition table in the access sequence with the required Field
And next when you are maintaining the condition record for say ZSCT you will have to maintain condition record for the condition table which has Taxclassification3-Customer and taxclassification3.
In Document the values will be flown correctly after changing this.
Hope I have Solved your Query.
If any Doubt please revert.
Regards,
Rohit Dongre

Problem with Packaging Material Type

Similar Messages

Maybe you are looking for