Problem with packet data with E5

Last night every thing was OK, I was able to connect to internet using my phone
but  today  I tried to connect  but I get this msg
"packet data: packet data not available .check network services"
I called the company  and they sent me the configuration and I saved it  but  nothing changed .....
Any ideas ??

Straight Talk with AT&T USA (APN: tfdata) or T-Mobile US (APN: wap.tracfone)?
Lauraboop wrote:
how this all this could happen just from taking out the battery.
Well, you had to take out the battery while it was running. Then, a lot of fancy things can happen like a file-system corruption or just a SIM re-detection. The latter could load new configurations. The former would require the Nokia Software Recovery Tool on a Windows computer. Anyway, that is very, very rare – let us hope this is fixable by just changing the settings.

Similar Messages

  • Nokia 5530 packet data problem with vodafone live

    Wifi works fine just everytime i go on vodafone live it comes up unable to connect and then something about packet data , vodafone were no help at all in shop, carphone warehouse said update the phone no joy , CPW said everything was there ? in settings so HELP! also this affects my MMS

    hi,try going into connectivity settings, open destinations, open internet and delete ALL access points. Turn off phone. Now restart, go back into connectivity settings and in internet- options-new access point, select automatically check for available access points, select packet data, name it whatever you like, and use that. Hopefully this should resolve your problem.
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Problem with item and/or data during page-processing-PS/SQL

    Greetings!
    On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
    Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
    declare a number;
    begin
    case :PLATZ
    when 1 then a:=100;
    when 2 then a:= 50;
    else a:=25;
    end case;
    update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
    where ID_MITGL = :P14_ID_MITGL;
    end;
    :PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
    As I understand, that process should also run, when I submit a chance, but nothing happens then.
    But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
    ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table TBL_TURNIERSIEGER.
    Then, when I go back into the app-builder and try to run the page again, I get this message:
    ORA-01403: no data found
         Error      Unable to fetch row.
    I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
    Thanks, best regards,
    tobi

    First can you please post all log file errors
    >> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
    1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
    If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
    2. You can try reinstall from start (In this case you have to make sure that you un-install all)
    [Personal Site] [Blog] [Facebook]

  • Problems with the O2 blackberry data package on my Curve 3G.

    I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
    I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
    Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
    Many thanks, Jade.

    Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello. 
    filipina heart

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

  • Problems with codepage after refreshing data from XML

    Hello,
    I've created a dashboard with XML connection.
    XML file with new data is created via macro in INPUT.xls Excel file. This INPUT.xls file was created through exporting spreadsheet from Xcelsius and then adding a macro to it, so text data should be this same codepade. Generated XML through macro have no errors and Flash file gets numeric data with no problems.
    But there is other problem with text's codepage. After reload there are some unidentified symbols in place of polish alphabet letters.
    What should I do to make it right? Is this a problem with codepage or something else?
    [Dashboard Before Refresh|http://lh4.ggpht.com/_Q8NK6X6PPLg/TGkLwo3sxZI/AAAAAAAAA_g/mkBiDdM4Gi4/s640/before_refresh.JPG]
    [Dashboard After Refresh|http://lh4.ggpht.com/_Q8NK6X6PPLg/TGkLwSx9fHI/AAAAAAAAA_c/3UeM2Gd3HvA/s640/after_refresh.JPG]
    If you have any idea hot to fix it, please let me know.
    Best regards,
    Bart Dlug

    Hello,
    I have header in my XML as follows:
    <?xml version="1.0" encoding="Windows-1250"?>
    Only then my XML file is displayed correctly in Internet Explorer preview. When I chagne it to UTF-8 I get some errors.
    [XML with windows-1250 codepage|http://lh3.ggpht.com/_Q8NK6X6PPLg/TGkUakDHjlI/AAAAAAAAA_o/lLlJFMcSaFQ/s800/codepage1250.JPG]
    [The same XML with UTF-8|http://lh5.ggpht.com/_Q8NK6X6PPLg/TGkUa8k4vyI/AAAAAAAAA_s/tdcZNqu7-i0/s800/codepage-UTF8.JPG]
    Error message means: Invalid character was found in text content. Error during processing resourcse file:///
    As I wrote before, my data is generated via macro in Excel, so I supose my data in this file has windows default codepage. Am I right?
    Do you think that I problem is XML file?
    Best regards,
    BD

  • The timesheet creation failed, because of problems with the project I server or with data validation

    Hi,
    One of my user is facing issue in creating new time sheet,
    "The time sheet creation failed, because of problems with the project server or with data validations".
    This issue is coming to only few members out of 10000 members.
    Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
    Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
    Many thanks in advance.

    I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
    Ben Howard [MVP] | web |
    blog | book

  • Problem with material and document date in sales order

    Hi All,
    I am working in ECC 6.0 .I am facing problem with two fields when in enter in to sales order(tcode:va01)
    1.A material comes automatically in line item.
    2.Document date also comes as 27.03.2008 instead of todays date in each order i create.
    I think its not related to configuration.I think its related to some modifications through exits or enhancement points.could someone suggest me a where to check and solve that.
    Your's suggestion is appreciated.

    Hi Sharad,
    Check MV45AFZZ include in se38..It is a user exit for basic validation on sales...We may be able to find some code there (if screen data is predefined by code as mentioned)
    Hope it helps
    Regards
    Byju

  • Problem with date and time preference

    hi there,
    i set my date and time and the time support yesterday and then i click the lock button to prevent further chance and last night i shut down my iMac, open it again in the morning the lock open back up and the timezone support change.
    i redo that again and restart my iMac the same thing happen. is this a problem with my software or everyone have this problem?
    any idea what should i do?
    thanks in advance
    regards AL

    Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

  • Problem with data not displaying in website

    Hello All,
       I am having a problem with one of our applications. It is written in ColdFusion and uses SQL server. The problem that we are having is when we use the URL Http://bma.com (that is not actually the site name)  we cannot see all the data that it is suppose to pull in. I get an error on page and when I select to view the error this is what I get
    Message: 'WddxRecordset' is undefined Line: 184 Char: 2 Code: 0 URI: http://bma.com/user_maintenance.cfm and Message: 'jsusersTLV' is undefined Line: 3208 Char: 6 Code: 0 URI: http://bma.com/user_maintenance.cfm
    If I put the IP address in the URL for example http://165.83.109.246/bma/login.cfm all of the data is displayed as it should.
    Any thoughts or sugguestios on how to correct this?
    Thanks

    Yes, the user_maintenance.cfm is one of the forms that the data is not displaying on. There are multiple forms in the application and that just happens to be one of them. the login.cfm is just the login screen. Once you select your name and enter your password to the application then you can select the user maintenance form. If you select someones name the application should pull in all of that persons information. That is the problem, it is not pulling in any information on the user. We get a blank screen where data should be. When we use the IP address in the URL and select someones name in the user manintenance form, it pulls in all the data from that user as it should.

  • Problem with Import and Export Data Wizard

    Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
    to use.
    After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
    and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
    displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
    I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
    How can I correct this problem?

    First can you please post all log file errors
    >> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
    1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
    If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
    2. You can try reinstall from start (In this case you have to make sure that you un-install all)
    [Personal Site] [Blog] [Facebook]

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • Problem with BTE and FI-parking- no data from memory ID to ABAP

    Hi Experts,
    I have a scenario in Business Workflow where I want to catch the data(BKPF & BSEG) after SAP transaction processing - event is to change parked FI-document with FBV2. I´m trying to use BTE to receive the data after processing transaction.
    All BTE steps seems to be activated - because I can debug my functions when processing FBV2 - but I cannot reach any data into my coding after processing.
    I have created my project in BF24:
    ZXXX Testing: WF-memory ID
    I have also linked few FI-events to my BTE interface funtion in BF34:
    00001130 ZXXX ZXXX_FIPP_CHANGE_BTE
    00002213 ZXXX ZXXX_FIPP_CHANGE_BTE
    00002217 ZXXX ZXXX_FIPP_CHANGE_BTE
    My BTE function ZXXX_FIPP_CHANGE_BTE is as following:
    DATA: memid(15) VALUE 'ZXXX_2217'.
    *Initialize
    CLEAR: t_vbkpf,
    t_vbsegs.
    FREE MEMORY ID 'ZXXX_2217'.
    *Backtracking of BTE
    EXPORT t_vbkpf
    t_vbsegs
    TO MEMORY ID memid.
    ENDFUNCTION.
    I have also created funtion to call FBV2:
    data: memid(15) value 'ZXXX_2217'.
    CALL TRANSACTION 'FBV2'.
    *Import memory of BTE
    IMPORT t_vbkpf
    t_vbsegs
    FROM MEMORY ID memid.
    *Free memory id
    FREE MEMORY ID memid.  
    When I set a breakpoint to both of the functions and I execute FBV2 I reach the breakpoints. Problem is that the data is not passed from memid 'ZXXX_2217' into function after FBV2(this syntax: IMPORT t_vbkpf t_vbsegs FROM MEMORY ID memid.)
    What could be missing. So both functions are called but NO DATA is passed from memory ID to my internal tables? This seems to be a problem with memory ID´s. Also in my BTE function ZXXX_FIPP_CHANGE_BTE I receive a sy-subrc value 4 when executing syntax "FREE MEMORY ID 'ZXXX_2217'. ".
    All hints appreciated,
    Jani

    Hi Ramki,
    I must be frustrating You with these stupid questions... You have already supported me hugely to get more famailiar with BTE. For example not to commit in BTE etc. Big thanks for that!
    In all cases when I have tested my project in BF24 has been always active; and yes I have changed the pre. posted document always to trigger the BTE.
    I still have a problem. I copied all customizing and coding into other system - with same dissapointing results. Let me describe this once more:
    <b>My entry in BF24:</b>
    <i>Product:                 ZBE
    Text:                       Jani testing
    RFC destination:
    Active:   </i>               X
    <b>My entry in BF34:</b>
    <i>Event:                   00002214
    Product:                    ZBE
    Ctr:
    Appl:
    Function module:            ZBE_BTE</i>
    <b>My BTE function:</b>
    <i>  DATA: memid(15) VALUE 'ZBE_BTE2214'.
      DATA: t_vbkpf LIKE fvbkpf OCCURS 0 WITH HEADER LINE.
      FREE MEMORY ID memid.
      EXPORT t_vbkpf TO MEMORY ID memid.</i>
    <b>And the function ZBE_BTE_EXECUTE where I call FBV2:</b>
    <i>  DATA: memid(15) VALUE 'ZBE_BTE2214'.
      DATA: t_vbkpf LIKE fvbkpf OCCURS 0 WITH HEADER LINE.
      CALL TRANSACTION 'FBV2'.
      IMPORT t_vbkpf FROM MEMORY ID memid.
      FREE MEMORY ID memid.</i>
    When I process my function ZBE_BTE_EXECUTE - and I have added a breakpoint into ZBE_BTE - for FBV2 call <b>it does not reach the breakpoint</b> in ZBE_BTE at all! This occurs when using event linkage 00002214! And I do execute a real change to parked document.
    But if I change the entry in BF34 to be linked for event 00002217 or 00002218 process reaches my breakpoint in BTE function ZBE_BTE! But in these cases also, it does not import the data after transaction call in function ZBE_BTE_EXECUTE. When I continue debugging the coding in BTE function ZBE_BTE further into SAP-coding, I can see that my internal table t_vbkpf is filled. But when I leave SAP-coding when FBV2 is completed and return to ZBE_BTE_EXECUTE - where t_vbkpf should be filled from memory id - t_vbkpf is empty!
    Again as a conclusion in this system:
    For BTE event 00002214 this locig does not work at all. For events 00002217 and 00002218 it does get activated, but does not bring any data from memory ID into my abap. Strangest this is that I use absolutely same kind of coding that You.
    Can You see if I have to fill those empty fields( Ctr. & Appl.) in my BF34 customizing? Or is some other customizing action missing?
    Br,
    Jani

  • Problem with Java Dates and UPDATE for SQL2000

    I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
    var Today = new Date()
    var conn = Server.CreateObject( "ADODB.Connection" )
    conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
    var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
    var rs = conn.execute(sql)
    I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
    Help....
    Norm...

    Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
    Lee

  • TS2756 hotspot is not working on myiPad 3, hotspot tap is cellural data always appear that it is searching, and never stop. Vodafone and tradeline told me that there is no problem with carrier and Sw. Tethering data is never kept.

    Hotspot appear always to search and never stop
    internet is not working without internet APN data
    Tethering APN  never save the data
    Vodafone carrier checked and mentioned that the no problem with the SIM
    Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
    Please advice

    I have this _same_ issue, exactly.  Initial backup goes just fine, but incremental backups fail.  And like you, I replaced the internal drive.
    The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago.  The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC.  But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago.  I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
    I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail.  This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
    I'll be checking into this thred to see if others have the same issue, or if a solution is found.  Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
    -Gizm0d0

Maybe you are looking for

  • How to I go about backing up my macbook on my External Hard Drive?

    Hi, I'm really not computer savvy and i was hoping i could ask you for the best way to backup my air using my 1TB external hard drive? I wanted to have space for time machine backups as well as space so i could manually backup (archive) certain docum

  • ALV GRID - Get setting of the variants

    Dear All, I have a program which provides a list with ALV - the user can give his ALV variant on the selection-screen. I have to know the setting of the variant chosen - Field - Sort - subtotal - This program could be ran in background, that why I ha

  • Transcoding error Premiere Elements 2.0

    I'm having trouble with burning to a DVD. I keep on receiving a transcoding error that reports that Adobe failed to return a video frame and it's cancelling the operation. Most of the time the burn process fails at about 42 % although the last time I

  • Documenting a Framework Installation

    Has anyone developed a script that assembles the relavent configuration files and documents the current configuration of a framework. You could start with the CISTAB file and from you will know how many environments you have to deal with and the loca

  • TextFlow using an embedded font or stylename in span

    I am trying to use an embedded font in a TextFlow span element in a TextArea in a custom component and it is not working.    Also can you use a stylename from an ext. stylesheet?  The fontFamily works if I style the TextArea itself with it, and it wo