Problem with Page totals

Hi,
I have a problem while displaying page totals using <?show-page-total:dt?>. It doesnot display any values. The requirement is to display the page total before a page break and a page can have a max of 20 lines. So, after 20 lines, there should be a total of the numerical value and there should be a page break.
I have restricted the number of lines per page using the <?if:position() mod 20 =0?> <xsl:attribute name="break-before">page</xsl:attribute> <?end if?> in a form field called FIXED_LINES before the end of the group as follows:
Contact : C1 ----- group by contract
Order Amount
For-each Order1 1000 FIXED_LINES End-for
Sum:1000
The sum has to be displayed beneath the table. To achieve this, i used the <?add-page-total:mt;'Amount'?> in the Amount field and <?show-page-total:mt?> in the place where sum has to be displayed beneath the table. This does not work. The <?add-page-total:mt;'Amount'?> seems to work but only <?show-page-total:mt?> does not work. I verified this by inserting the <?show-page-total:mt?> within the table before the (End for each) and it seems to work.
What am i missing here. How can i get rid of this issue. Kindly help.
Thanks,
Vidhya

Sunil,
Going to assume you are using a Table Node. Try using inserting a Program Lines Node into your Table Node. Within this Program Lines Node, accumulate a running total into a Global Variable. Display this Global Variable via a Text Node in the Table FOOTER event.
Hope this helps.
Cheers,
Pat.

Similar Messages

Printing Grand Totals in Footer along with page total

Hi
I have a report which prints PO Header and PO Lines. For each page while iterating thru PO Lines I print page total in the footer.
Once all PO Lines are printed with page totals in the footer of each page, I want to print Grand total in the last page in the footer along with last page total. Currently my XML data has pre-computed grand total in the PO Header block.
The problem
I have wrapped header and lines inside <?start:body?> and <?end:body?> which allows me to print page totals outside the <?end:body?> tag.
I print page totals and "Continue" next to it in the footer. But
Finally when grand total comes into picture in the outer loop I want to replace "Continue" text with grand total value in the last page and print it as footer.
I tried to use xdoxlt:set_variable() function to flag a variable value to 1 when iteration happens in HEADER block and set it to 2 in inner loop of lines block. But the scope of the variable is confined between <?start:body?> and < ?end:body? and is not visible outside the <?end:body?> tag.
The logic I want to accomplish is
if var = 1 then
print page total and "Continue"
elsif var = 2 then
print page total and Grand Total.
end if
This logic doest work as the value of var is not visible outside the body tag.
I want to use this variable value to print footer which lies outside <?end:body?> tag with grand totalor page total
Please suggest if there is any other way I can accomplish this functionality. Can we use parameter and update it. Syntax for update parameter value is not clear in user guide.
Any help would be appreciated.
thanks
sukarna

thanks for the info, i was trying to avoid this but had already reached the same conclusion.
everything else seems to be very time consuming and may not work correctly in the end.
we're on Oracle Applications : 11.5.10.2 which has just been converted to utf-8 and is an Oracle On-Demand installation.
do you know if 5.6.3 of the publisher is supported and any ideas on how difficult it is to get it installed?
cheers
ellen

Problem with Grand total in Crystal report xi

Post Author: eshwar_polawar
CA Forum: Crystal Reports
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Post Author: eshwar_polawar
CA Forum: Crystal Reports
eshwar_polawar:
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Problem with Grand Total

Post Author: eshwar_polawar
CA Forum: Formula
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Thanks and Regards
Eshwar

Post Author: eshwar_polawar
CA Forum: Crystal Reports
eshwar_polawar:
Dear all,
I am facing the problem with Grand total field in Report footer.Please advise me how should we resolve it.
My report design as follows
Report Title
Page Header section:
charged date    fee_ description charge_ amount currency_code
Group Header #1(Group by bank_ref)
Group Header #2(Group by Currency code)
Details
charged date    fee_ description charge_ amount currency_code
Group Footer#2
(Sub Total )
Running Total field(Fields to Summarize on Charge_amount, Evaluate on "Group2# change of currency code) ,Sum of Charge_amount,Currency_ code
Report footer:
Sum of (charge_amount) currecy code
Example of data:
charged date   fee desc   chrage amount currencycode
0000000060129
CAD
10-Oct-2007    Transfer     200   Cad
11-Oct-2007 comm          150 cad
Sub total                        350 Cad
0000000060129
CAD
10-Oct-2007    Transfer     100   USD
11-Oct-2007 comm          150 USD
Sub total                        250 USD
Grand total     should   350 CAD but it is showing all total amoun 1000 CAD ,Group by Curreny code in the table
                                    250 USD but it is showing all total amount 1200 USD
Please provide the solutions like:
1).About Running total in Report footer section
2).Formula on While printing records for grand total
3).How will send links with subreports
Thanks and Regards
Eshwar

Problem with Pages on the iPad 2.

Hi all,
I have been having a strange problem with Pages on the iPad that I hope someone can find a solution for.
As a writer, I find that Pages on the iPad is a very good solution to my problem of needing something small and light to transport around, whilst still allowing me to do some serious writing. I use the Apple 3 battery bluetooth keyboard, and this gives me a superb working solution.
I started using the iPad 2 to do my second book and for the first 40,000 words everything was fine. But as I started going back and forth with the cursor keys, editing passages in the book, I noticed that the cursor position did not match up with the I beam cursor on screen. As it transitioned between pages it would loose it's corresponding position and the entry point for new text could be up to six characters in either direction.
Now this is not a problem if you enter a new page, as there is nothing beyond it, but in the majority of cases it is a major problem when going back over your work and editing it. I have to manually reset the start position of every new page so as to garantee the typing will go where I want it to.
Now I thought at first this was something to do with Bluetooth keyboard, but after using the onscreen keyboard and the find and replace function, I have noticed that it loses it's position in the document in a similar way. I have included a screen shot of it finding a problem I was searching for. In this case it is ", and" to be replaced with "and," or "and". Clearly in the image you can see that it is not happy and is not selecting the right things, if I replace it will replace exactly what is selected.
Has anyone else seen this problem. It seems to happen with large or small documents and I think that this is a fundamental problem with Pages on the iPad. Seeing as I can't get Apple to acknowledge this I brought it here for everyone else to check out. If we get enough voices on this, then we can make change happen.

That's right Br Abdullah, I'm finding the same problem with my itune Arabic library that I synced to iBooks version 1.5! As you say the pages are not arranged correctly.
The other problem that I'm finding is that the highlights & notes that i have made on the books on a previous version of ibooks, when synced with ibooks version 1.5, they are scattered everywhere, and sometimes in areas where there are no texts.
I left a message on the report a bug section of iBooks on the app store, and I contacted them on their feedback of apple product issues. I don't know what else we can do. It seems that no one is listening to us. I'm Dissapointed that I upgraded my iBooks version to 1.5; I was really looking forward to reading on my new iPhone 4S (on iBooks)!
What else can we do to get our concerns heared? Somebody? Anybody?

Problem with page numbering in Acrobat XI Pro

Hello community,
I got a problem with page numbering with certain documents in Acrobat XI Pro.
The next error comes up:
Translated in English:
There is an error occured when getting up of page-content.
This is occured with certain pdf-documents (i cannot uploading this file).
Is someone have similar problem, or has someone hev a sollution for this?
Greetings,
Bart

This usually means the file is corrupt, probably because it was not created
using a standard application like Adobe Acrobat.

I have a problem with Pages shutting down my documents.

I have a problem with Pages shutting down my documents. I have several
several documents on my homepage,but once I select one it shuts down and
goes to the ipad homepage.Other documents open with no problem.
Can someone tell me what's happening
antdel

Pages is crashing for some reason.
You say that other documents open with no problems, do you mean other Pages documents or documents in another app?
Try closing Pages completely in the recents tray and reboot your iPad. See if that helps. If it doesn't help, you may have to delete and reinstall Pages. If that doesn't work, you might have a corrupt document that you need to track down and delete.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Problems with Pages 5 docs converting to Word docs

It seems with the new upgrade on my MacBook Air, I have a glitch. Now when I convert a Pages doc to Word, the page breaks get removed and the doc turns into a sea. Also, I sent this new Word doc to my Kindle to upload into ebook form (never had a problem with Pages 09 previously, always came out beautifully) and now the doc turns into a digitally mangled mess. Any ideas?? Thank you.

Usually when it does that it is because there is an XML table somewhere buried in there and either the table width or margin indents are forcing the text far left.
Hard to pin down the problem with being able to examine the actual file contents.
…and Pages 5 is buggy.
So why don't you just use Pages '09? It works.
Peter

Problem with Pages 09 after latest Snow Leopard Update

I upgraded Snow Leopard with the latest update this afternoon, and now I am having all sorts of problems with Pages. Most importantly, the Pages templates are all messed up, with formatting all screwed up and the typesetting a mess. Has anyone else experienced such problems with Pages after the update? I may have to revert back to pre-update Snow Leopard if this can't be resolved, since I use Pages for my work. Any assistance here would be appreciated!

You can install the combo over the delta (Software Update version). I did after I inadvertently used Software Update on my MacBook Pro. That's what I get for trying to update 3 Macs at one time.
Here is the link to the Mac OS 10.6.4 combo updater.

Problem with the "Total By" icon

Hi.
Working with Answer I've a problem with the "Total By" icon when the fact displayed is semi-additive.
I try to explain better:
1) my fact table has the following dimensions
Time (year granularity)
City
Type of contracts
2) the fact table contains the fact "Number of Active Contracts"
this fact is additive by City and Type but not by Year.
The "Number of Active Contracts" is calculated usign 2 existing logical columns
Sum (of Number Of Contracts (at base granularity)) / Count Distinct ( of Years )
This fact express an average when more than year is involed in the aggregation,
but express the exact number of contracts if the year is displayed as an output column of the report.
This fact works well changing the aggregation in reports, but when I click on the "Total By" icon to show
the totals its behaviour is different from expected.
consider the report with the following columns:
Yearm City, Number of Active Contracts
Click her to view it: http://yfrog.com/euerrtotaliconj
The "Total By" icon Instead of the sum divided by ditinct years involed, i.e. 1, shows the sum divided by the number of Cities.
It seem it is counting 5 tiimes (= number of cities) the same year.
But If make a report with
Year, Number of Active Contracts
Click her to view it: http://yfrog.com/mjoktotalj
it works as expected !
Many thanks,
Andrea
Edited by: aromani on 17-nov-2010 8.06

Philipp is right to tell the developer that the toolbar is automatically disappearing after customizing the add-on on the toolbar. I tried it, and it looks like it gets attached to the Bookmark Tool bar. It may help to make sure all the Toolbars are visible in '''View> Toolbars. '''
It may also be because I have too many extensions on my toolbar ( Too many favorites :-))

Export problems with pages/ save as word document results in corrupted text

This may be a new problem with Pages as I have not seen this happen with previous versions but, when I export a page made with a template, it ends up with merge problems - headers end up at the foot and invisible text regarding merge showing. When saved, a error box opens saying that merge fields are not save or similar, and I end up with a non friendly .doc file.

morayshire wrote:
This may be a new problem with Pages as I have not seen this happen with previous versions but, when I export a page made with a template, it ends up with merge problems - headers end up at the foot and invisible text regarding merge showing. When saved, a error box opens saying that merge fields are not save or similar, and I end up with a non friendly .doc file.
Here are alert messages related to 'Word Exporter'
/* Word Exporter */
"Cells with unsupported number formatting were exported as text." = "Les cellules comportant un format numérique non pris en charge ont été exportées sous forme de texte.";
/* Word Exporter */
"Change tracking isn\\U2019t supported for cell image fills. Original cell image fills were removed." = "Le suivi des modifications n’est pas pris en charge dans les remplissages de cellule par image. Les remplissages de cellule par image d’origine ont été supprimés.";
/* Word Exporter */
"Change tracking isn\\U2019t supported for cell image fills. Tracked changes for cell image fills were accepted." = "Le suivi des modifications n’est pas pris en charge pour les remplissages de cellules par image. Les modifications effectuées pour ces remplissages ont été acceptées.";
/* Word Exporter */
"Change tracking on floating objects isn\\U2019t supported. Tracked changes were accepted." = "Le suivi des modifications sur les objets flottants n’est pas pris en charge. Les modifications ont été acceptées.";
/* Word Exporter */
"Comments on anything other than body text and inline objects aren\\U2019t supported and were removed." = "Les commentaires sur un autre élément que le corps de texte et les objets incorporés ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Durations formatting isn\\U2019t supported and was exported as text." = "Le formatage des durées n’est pas pris en charge et a été exporté sous forme de texte.";
/* Word Exporter */
"Footer rows aren\\U2019t supported and were converted to regular rows." = "Les rangs de bas de tableau ne sont pas pris en charge et ont été convertis en rangs standard.";
/* Word Exporter */
"Formulas referencing cells with custom number formats aren\\U2019t supported and were replaced by the last calculated value." = "Les formules faisant référence à des cellules comportant des formats numériques personnalisés ne sont pas prises en charge et ont été remplacées par la dernière valeur calculée.";
/* Word Exporter */
"Formulas referencing durations aren\\U2019t supported and were replaced by the last calculated value." = "Les formules faisant référence à des durées ne sont pas prises en charge et ont été remplacées par la dernière valeur calculée.";
/* Word Exporter */
"Hidden footer content was removed." = "Le contenu du pied de page masqué a été supprimé.";
/* Word Exporter */
"Hidden header content was removed." = "Le contenu de l’en-tête masqué a été supprimé.";
/* Word Exporter */
"Hidden rows and columns were removed." = "Les colonnes ou rangs masqués ont été supprimés.";
/* Word Exporter */
"Japanese footnote or endnote numbering isn\\U2019t an exact match." = "La numérotation japonaise de note de bas de page ou de fin ne concorde pas exactement.";
/* Word Exporter */
"Links to external Pages documents aren\\U2019t supported and were removed." = "Les liens vers les documents Pages externes ne sont pas pris en charge et ont été supprimés.";
_/* Word Exorter */_
_"Merge fields were exported as regular text, not as merge fields." = "Les champs de fusion ont été exportés comme texte standard et non comme champs de fusion.";_
/* Word Exporter */
"One or more formulas aren\\U2019t supported in the chosen file format and were removed. The last calculated value was retained." = "Une ou plusieurs formules ne sont pas prises en charge dans le format de fichier sélectionné et ont été supprimées. La dernière valeur calculée a été retenue.";
/* Word Exporter */
"Some paragraph border rules couldn\\U2019t be exported." = "Certaines règles de bordures de paragraphe n’ont pas pu être exportées.";
/* Word Exporter */
"Table cell comments can\\U2019t be exported if there are any comments attached to the entire table. The table comments were exported, but cell comments were removed." = "Les commentaires de cellules de tableau ne peuvent pas être exportés si des commentaires sont associés au tableau entier. Les commentaires de tableaux ont été exportés mais ceux de cellules ont été supprimés.";
/* Word Exporter */
"Table cell fills other than solid colors aren\\U2019t supported and were removed." = "Les remplissages de cellules de tableau autres que par des couleurs unies ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Table image fills aren\\U2019t supported and were removed." = "Les remplissages de tableau par image ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Tables with more than 63 columns aren\\U2019t supported. Columns 64 and highger were removed." = "Les tableaux comportant plus de 63 colonnes ne sont pas pris en charge. Les colonnes 64 et au-delà ont été supprimées.";
/* Word Exporter */
"The page layout document was exported as a word processing document." = "Le document de mise en page a été exporté comme document de traitement de texte.";
*_This gives us a simple way to convert a Page Layout document into a Word Processor one. Export it to Word, import the .doc file._*
/* Word Exporter */
"WECannotMapNumberFormat" = "Le format numérique non pris en charge a été remplacé par le format numérique par défaut (1, 2, 3…).";
Yvan KOENIG (Vallauris, FRANCE vendredi 7 août 2009 21:18:06)

Problem with page preview : transodification of ':' and '/'

Hello
we got a problem with page and iview preview on production system (7.01).
The preview fail with a simple message "Erreur d'exécution portail / Exception lors du traitement de la requête, envoyez l'ID de l'exception à votre administrateur du portail" ("Portal execution error / exception during request treatment, send exception Id to your portal administrator").
The user possess full admin role, as weel as autorisations onto the page. He can use the page when it's in the menu, but visualizing the page via preview fail.
after comparing the preview URL from production system against the preview URL from development, we spotted a difference :
on the dev portal, the URL is
http://portal:port/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fcom.company.directory.SpecificApp!2fcom.company.directory.LeaveRequest!2fcom.company.directory.Employee!2fcom.company.page.MyRequests?sap-config-mode=true
on the production portal, the preview URL is
https://portal/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!253aportal_content!252fcom.company.directory.SpecificApp$!252fcom.company.directory.LeaveRequest!252fcom.company.directory.Employee!252fcom.company.page.MyRequests?sap-config-mode=true
As you can see, the ":" are transcoded into !3a on dev, and !253a on prod (and the "/" are respectively transcoded into !2f and !252f)
the other difference is the use of an alias (http://portalprod/irj against http://portal:port/irj), and the use of a secured connexion (https).
does someone know where this problem could come from ?
regards,
Guillaume

Hi Guillaume,
Could it be possible that there would be a SAP Web Dispatcher on the Production Portal and not on the dev portal.
You should use a tool like HTTPWATCH to see if you get HTTP redirects.
Regards,
Olivier

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problems with pages loading

We are having a lot of problems with pages loading slowly or not at all. We get this message all the time...server not found...even on pages that have just recently been visited. We have this problem with Safari, Firefox, and Camino. I don't have Internet Explorer installed, but why should I just keep adding new browsers. My ISP assures me that the connection is fine. I have emptied caches, cookies, whatever I can find to empty. Did I empty too much? We use a Netgear router and a company called Digitron. Any suggestions?
Message was edited by: cynder13

Hi
Perhaps the easiest way to sort this out is to set up a separate Network Location for your connection:
-Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
-Next, click on the "Show" drop down menu and select Network Port Configurations. Only Airport ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
-Back to the "Show" menu, select "Airport". Click on the TCP panel. There, enter 4.2.2.2 and 4.2.2.1 (separate lines) in the DNS servers box and select "apply". Also, you can always call your Internet Provider to find out if they have specific codes.
Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations, hence creating the lag you are seeing.
Lastly, in the Finder, go to your Applications>Utilities folder and select "Terminal". Once the screen is open copy/paste lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
If the above doesn't help, I suspect the Router is the problem. Perhaps you need to upgrade its firmware. Check at the Netgear site>Support.
Post back

Satellite L30: Vista problems with pages minimising

Hi,
i have just bought the toshiba Satellite L30 laptop and i am am having problems with pages minimising whenever i click on the page. Most of the time this happens when i click on the scroll bar, but it also happens when i click on any part of the page and when im typing.
It's getting very annoying. I have only had this laptop for about 2 weeks and the problem has been there since day one. Im runing Windows vista home basic.
Does anyone know the cause and/or how to sort it out?

Hi there,
be more precisely with your error description, because its hard for anyone whos reading this to find out some problems without knowing which "pages" do you mean. What a kind of program do you use?? Word, Internet Explorer or what???
Please, do us and yourself a favor and tell the problem with more details, that we can maybe help you. Or at least make some thoughts about your problem. :)
Greetings ;)

Problem with Page totals

Similar Messages

Maybe you are looking for