Problem with Parked documents

HI All,
after parking the documents, when i see the parked document in the display mode, i can see the payment method value, but when go into edit mode the payment method value is blank.
Note: we are in Ecc6.0.
Edited by: NIV on May 19, 2010 1:26 PM

Hi
Please check if you are using Automatic Payment and system had been configured accordingly and vendor master is also maintained accordingly. If you are not using Automatic Payment and if the vendor master in question is not maintained, then the Payment Method when doing FB60 is of no relevance. Therefore, in change mode of parked document what you entered during FB60 is not shown.
Regards
Aninda

Similar Messages

Downpayment with park document

Hello everyone.
I would like to post down payment with park document(F-63).
but I met the below message.
How can I solve this problem?
Help me..
Special G/L transactions not defined for bills/exch.and down pmnts
    Message no. FP030
Diagnosis
    You have selected a posting key with a special G/L indicator of type
    'Bill of exchange', or 'Down payment'. Document parking is not defined
    for special G/L transactions of the type 'Bill of exchange' or 'Down
    payment'.
System Response
    Document parking cannot be carried out.
Procedure
    Select a different posting key or special G/L indicator. If the posting
    is a 'One-time posting' to a rent contract, select a different
    transaction type or post the document directly.

HI,
goto
Financial Accounting->Accounts Receivable and Accounts Payable->Business Transactions->Down Payment Made->Define Alternative Reconciliation Account for Down Payments
create Down payment on current assets double click on this and give your chart of account enter reconciliation account and special gl details.
before that you must create gl for spl gl of reconciliaation account type vendor
the same way you also create you create Bill of ex.
Bills of Exchange
     You make the settings for the following bill of exchange types:
     o   Bill of exchange receivable
     o   Bill of exchange payable
     o   Check/bill of exchange
     under Financial Accounting -> Bank Accounting -> Business Transactions
     -> Bill of Exchange Transactions

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

You can not insert a section break into a textbox.
You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
You may find this a usueful resource as well:
http://www.freeforum101.com/iworktipsntrick/
Peter
PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

Problems with attached documents in Mail and Docs To Go

Hello everybody.
I've found a problem with attached documents in Mail. In fact, if I click on attached documents with .doc (microsoft office word 97-2004) and files in .docx Office Open .xml, the iPad doesn't open them, also if I click in "Open with Docs To Go (which should support these files' format)".
How can I do? There's an application or another way to open these files?
Other Informations:
Docs To Go version: 5.2.2

Update the patch to the Sapgui.
Regards,
Ignacio.

Error, problem with saving documents, Illustrator

I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
But when I work only with objects from AI - everything is ok - any error, I can save it.
I have reinstalled and updated AI. And nothing changed.
What is a problem?

<moved from Downloading, Installing, Setting Up to Illustrator>

Problem in Park Document

Dear All,
I am posted a park document included withholding tax against T-Code MIR7,
Then a post the park document and deducted the withholding tax.
and this document was reversed after some times ago, but withholding tax amount show the withholding tax program i.e J1INMIS t-code.
Please solved my problem.
Regards
Vishwajeet

Hi
when you park or post the document with transaction mir7 with deduct the Withholding tax then in accounting entry generated
Suppose
Exp dr 500
Vendor Cr 400
TDS cr 100
Then in transaction code J1imis the the withholding tax information will show
At the same time when you reverse the document You also see the reverse document in J1inmis
please let me know what is your requiremnt
Regards
Roobal

Problem with scanning document in PDF format to computer

has anyone had a problem with scanning to the computer a document in pdf format from hp Photosmart 7525 e-All-in-One series wireless printer? The document appears in My Documents but when I try and open the document I get an error message that says the document cannot be opened. I can scan and open the document in TIF format. I am running Windows 7 Home Premium and I just installed the Photosmart 7525 printer. I've uninstalled and reinstalled the printer using the CD download.
This question was solved.
View Solution.

Hi,
Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
http://get.adobe.com/reader/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems with attach documents in solman

Hi Experts,
I need to attached to my organizational business structure (in Tx SOLAR01 and SOLAR02) many templates documents of functional and technical specifications and have a problem with that.
When I make the solar_project_admin transaction and click onto project template buttom to create a personal document the system gives me a warning message:
"Documentation types in SAP namespace cannot be copied
Message no. SPROJECT371
Diagnosis
You tried to copy documentation types in the SAP namespace into the template. This is not possible.
System Response
The documentation types were not copied."
Could you please tell me how can I create my own document (SOLAR01 Y SOLAR02) to attached onto the structure?.
Tks!
Ignacio.

Update the patch to the Sapgui.
Regards,
Ignacio.

Archive Link problem with redundant document names

Hi all,
I have a tricky problem in archive link. I would like to attach some different documents to an HR/PD Organisation unit ( objekttyp pdotype_o )
All customizing works fine but the problem is, all documents attached to one busines object ID have the same name ( in this case objectnumber.pdf)
I am not lucky with this issue because the users must be able to see all documents ( via document finder ) attached to the org. unit and all what the users get, is a list of one or more documents with exactly the same name.
In some cases this are about 10 different documents and this issue is a very bad solution because users have to open all attached docs to recognize which one they need.
During the import/check in of the documents via transaction OAAD and OAWD, SAP renames the original document name.pdf into the related object ID.pdf and there is no way to rerename it or influence this process.
I tried to use some scan software with SAP interface but unfort. with the same result because software of this kind use the archive link interface too and cannot influence the process of check in and rename.
Has anybody an idea ( third party software, customer development or something like this ) to prevent this problem and give me the possibility to stay with the original document names or change it after check in?
Thank you in advance
Rayko

How you fix this problem?
I'm with the same problem. Could you help me please?
Edited by: broullon on Jul 16, 2009 5:31 PM

Help - Problem with word documents

Hi
All of a sudden I am having problems with documents in my word application. Files I have previously transderred on to my Mac from a memory stick or via email attachments are unable to be altered. i cannot add to a downloaded document that needs to be filled in or alter a date on a letter that I send out each month. I am not very compiter literate.
Beryl

Hi
All of a sudden I am having problems with documents in my word application. Files I have previously transderred on to my Mac from a memory stick or via email attachments are unable to be altered. i cannot add to a downloaded document that needs to be filled in or alter a date on a letter that I send out each month. I am not very compiter literate.
Beryl

Problem with Reversed document with IDOC interface

I have a problem when I create Idoc which will reverse a document.
I use ACC_DOCUMENT_REVERSE, in Idoc is filled like this -
OBJ_TYPE ( BKPFF )
OBJ_KEY( reverse document number + company code + year)
OBJ_SYS ( system id )
OBJ_KEY_R ( obj_key of document which will reverse )
PSTNG_DATE
COMP_CODE
REASON_REV
I formed OBJ_KEY with one select from table bkpf, and get the last number of documents reversed with Idoc interface. The interface creates Idoc reverse document with number 929xxxxxxx. With fb08 - documents created are 92xxxxxxxx.
The problem is when use transaction fs10n, fill customer account number, and the sums are not right. The documents which was reversed with Idoc did not entered in G/L Account Line Item.
But if I start transaction fbl5n - customer line item, the documents reversed by Idoc is there, and the total sum is right.
How can I resolve this problem?
Greetings,
Lazar Hristov

Hi,
I hope you have reversed the posting.Have you cancelled the downpayment invoice.
Please cancel the first downpayment invoice and post the amount for the second downpayment.
Now try to create the final invoice.
Regards,
Krishna.

Printing problems with Pdf documents created with Pages

I upgraded to Acrobat 8.0 recently and for some reason when I save a Pages document to pdf, within the print options then try and print, it prints blank.
I have created other pdf documents which print OK, so the problem lies somewhere within Pages.
I didn't have the problem with Acrobat 7.0
ANy ideas

When you say "Acrobat", do you mean Adobe Acrobat Standard or Pro? Or do you mean Adobe Reader?
If it is Adobe Acrobat, I would go to the preflight option and see what information you get there. But no, I have not had the problem myself.

Problems with Searching documents!

I am having a problem with the ability to search documents in the portal, everytime I run a search I get the message no results found.
I have done the following:
1. Create a File system Repository
2. Created a Crawler Profile
3. Created an Index and assigned the crawler.
4. Wait until it had finished and said their were 13 items.
However when I search their are none!
What am I doing wrong?

Hi Phil,
1. Check for trex server status in sys Admin--> Monitoring --> KM --> Trex Monitor
2. Check for the documents in the Folder on which you are creating index.
3. After you create a index, modify the parameters in sys Admin--> Monitoring --> KM --> Trex Monitor --> Edit Queue Parameters.
4. Check the Queue status in sys Admin--> Monitoring --> KM --> Trex Monitor --> Display queues. Sometimes try to flush the index.
5. If still not working, at times re-index the index or delete and recreate the index.
For efficient indexing see the doc
https://websmp102.sap-ag.de/~sapidb/011000358700000378692005E.PDF
Hope this helps,
thanks,
Praveen
PS. Dont forget to reward points

Dispute case with parked document

Hi,
Does anyone know if it's possible to create a dispute case from a parked document?
Thanks,
CC

Hi,
Parked documents concept in SAP is only for managment approval.
You can park any kind of document before simulating.
If you want to send dispute case to management approval then go for parking or else you can post directly.
Thanks
Chandra

Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

Problem with Parked documents

Similar Messages

Maybe you are looking for