Problem with partion resulting in "One of the source volumes specified has an invalid format and cannot be protected using Windows Backup. Only volumes formatted with NTFS/ReFS can be protected."

We have two new Windows Servers 2012 R2 that I'm trying to set backups on using a script. When I used the -allCritical switch, I get the error specified in the subject. When I look at the partition information using diskpart, I see a 2048 MB partition with
no drive letter labeled as System that is FAT32. I was never prompted to my recollection of what file system to format the partition with. Is it safe to assign this partition a letter, convert to NTFS, and then remove the drive letter?
Thanks

I did. I assigned the drive a letter and ran  CONVERT [drive letter]:
/FS. I was really worried during the reboot, but it came up OK, and after it was back online, I removed the drive letter.

Similar Messages

  • My Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.  The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8

    My
    Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.
    The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8

    tried another cable (from a camera) with no joy. However after turning off TM and searching for the EHD and not finding it, I revisited Disk Utility and can 'see' it there. The bad news is that it says,
    Verifying volume “Toshiba 1TB”
    Checking Journaled HFS Plus volume.
    Invalid extent entry
    The volume   could not be verified completely.
    Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “Toshiba 1TB”
    Checking Journaled HFS Plus volume.
    Invalid extent entry
    The volume   could not be verified completely.
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."

  • When I try to download the latest version of iTunes on my iPod Classic I get the message that "iTunes has an invalid signature" and that "Content was blocked because it was not signed by a valid security certificate.  Anyone know how to fix this?

    When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature.  The download has been removed."  I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc."  This problem has never occurred with earlier versions of ITunes.  Anyone know how to fix this problem? 

    Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
    Let us know what happens.

  • When I play a online crossword puzzle, after typing one letter the next letter I type is a number (and any letters after that are also numbers in consecutive order). How can I fix this?

    This problem has occurred on two different online crossword puzzle websites.

    RLites22,
    I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

    I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

    You need to be very careful which project you open in which version.
    For 2014 make sure its on 2014.1 build 81.

  • Need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac?

    need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac? is this software try to protect my pc or is it A threat to macs to.

    There are a number of extremly dubious sites which claim to offer Drivers for common Hardware, but actually are phishing for identies and credit card numbers and candidates to join a bot-net.
    Make absolutely certain you load drivers ONLY from the manufacturer's web site.

  • I purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

    i purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

    In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in.  Then try to sync your purchased music to your phone again.

  • HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

    Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized.  Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
    Hope this helps

  • I bought a new MacBook Pro several months ago.  I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2).  I find the quickest fix ix to turn Airport off and back on.  Very annoying.   Suggestions please?

    I bought a new MacBook Pro several months ago.  I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2).  I find the quickest fix ix to turn Airport off and back on.  Very annoying.   Suggestions please?

    What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band?  Are you both connecting vie 802.11 a/b/g or n?
    The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
    Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
    If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on.

  • Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

    Why has my 3G stopped working on my iphone? It is enabled, and I never had problems with it before, but for about 2 months now it has refused to work and as a result I can't send any attachments such as photos or videos via text.

    Cellular data is a feature from your phone carrier.  Have you contacted them to resolve your issue.

  • I have just pard a new i phone 4s with my mac OSX,the calender is not paring its stay at aseting saying moving calender to server account.I have focet quet with now result it just stay the same

    I have just pard a new i phone 4s with my mac OSX,the calender is not paring its stay at aseting saying moving calender to server account.I have focet quet with now result it just stay the same

    I have just pard a new i phone 4s with my mac OSX,the calender is not paring its stay at aseting saying moving calender to server account.I have focet quet with now result it just stay the same

  • Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    4. Reset the System Management Controller.
    5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • One of the pages I am working on is blocked and I cannot delete/change items displayed there

    One of the pages I am working on is blocked and I cannot delete/change items displayed there. I have unlocked all the layers but still cannot access the content on that page. Thoughts?

    I'm using version 9.2.1. on a mac
    I'm helping edit some maps for the company I work for. The pages are regular A3
    The map part is not blocked, but the second page with the descriptions/text will not let me make any changes to it. I cannot select anything on the page including the images.
    I am trying to edit the text provided and rearrange the page layout accordingly.
    I thought this was a "layer" problem, but this does not seem to be the case.

Maybe you are looking for