Problem with PCSuite 6

I use program PC Suite v.5.009
At updating on v.6.009 there is here such message
Input point in procedure? GetUIColor @@ YGKPBD@Z it is not found in library DLL NewUI.dll
What does it mean and what to me to do?
Attachments:
2010-12-20_010216.jpg ‏29 KB

Hi [email protected],
It seems that it could be a problem with the drivers. You should first try to uninstall PC Suite and download it again from Support on our website. http://www.sonyericsson.com/cws/corporate/home
If it still fails with the same error you could try to start your PC in safe-mode and see if the same problem occur when starting PC Suite.
Hope this helps, otherwise let me know.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Problem with pcsuite

I have a problem with my pcsuite version 6.80.22
I am using windows XP Professional version 2002 service pack 2.
My problem is when I make a backup for my contacts. It doubles everything. I mean all the contacts are doubled.
I tried a lot of restore but I think the problem is with the back up and not restore.
I don't know how to fix it.
Can anyone tell me what should I do?
I have more than 800 contacts and sometimes I have 3 or 4 numbers for the same contact. So it doesn't also syncronize everything with the Outlook. It only takes 2 numbers.
Thanks & regards
Khalil Zantout

I would say that most likely everything is syncronised to Outlook, but you need to view Outlook in such a way that every field is visible.
If you do multiple restores and also syncronise with Outlook, you may end up with duplicates because restore operation is unware of the sync operation. Why do you do multiple restores ? I do take regular backups, but that is just in case I loose my phone. The restoring would then happen to a new phone.
For everyday syncronisation betwee phone and PC I use PC Sync and Image Store, then the data is in usable format in my PC (as bakcup file is not since it is meant only for restoring)

Messages problem with PCSUITE !

Hello everybody. I have one little problem : This morning i've resofted my phone, Nokia N70 ME, and i have saved all my messages and contacts directly from Nokia PC Suite under their original form : For contacts .vcf and for messages .vmg . I've managed to restore my contacts but I haven't managed to restore my messages . Is there any possible way for me to restore my messages under this form(.vmg) via Nokia PC SUITE or to backup them with Nokia PC Suite under one file and then load them to my phone ? Thanks in advance .

Hey Radw! I'm experiencing the same problem after upgrading my phone this morning.
Instead of making a backup of my messages so it turns into an (.nbu), I just copied and pasted them into a folder so they turned into an (.vmg).
The PC SUITE has an application called Nokia Communication Center which allows you to import, export and copy and paste the messages. I thought it would be easily manageble to just drag and drop the messages into the Nokia Communication Center.
I was wrong
When I drag and drop my messages it at first says "copying", then stops and an error occurs and it says "It could not be copied. Please check file format".
Gonna reinstall the whole shebang again and se what happends.
Update:
I can drag and drop now But life still aint easy!
New problem:
When I read my .vmg messages on my computer it displays the time, person and number.
When I drag and drop them on Nokia CC the number disapears so all my messages go into the "outbox" so you can't see who the sms are from
Suggestions?

Installation problems with PCSuite - NCL...dll not...

Hi,
when installing PCSuite (the one bundles with my 6230i), even if the procedure seemed to be completed succesfully, the PC almost hung (it became extremely slow) for 10-15 minutes and then it show up a series of error messages for "LoadLibrary NCL*.dll failed".
Of course PCSuite couldn't connect to the phone.
I also got the PCSuiteCleaner logs:
Executing *.bat files --> BEGIN
File C:\Program Files\Common Files\PCSuite\Transports\NclBCBTMM.dll not found
File C:\Program Files\Common Files\PCSuite\Transports\NCLIrDAMM.dll found, version: 6.50.13.0
File C:\Program Files\Common Files\PCSuite\Transports\NclIVTBTMM.dll found, version: 6.50.5.4
File C:\Program Files\Common Files\PCSuite\Transports\NclMSBTMM.dll found, version: 6.50.20.0
File C:\Program Files\Common Files\PCSuite\Transports\NCLRSMM.dll found, version: 6.50.21.1
File C:\Program Files\Common Files\PCSuite\Transports\NclToBTMM.dll found, version: 6.50.12.0
File C:\Program Files\Common Files\PCSuite\Transports\NCLUSBMM.dll found, version: 6.50.23.1
File C:\WINDOWS\system32\\riched32.dll found, version: 5.1.2600.0
File C:\WINDOWS\system32\\riched20.dll found, version: 5.30.23.1221
Executing *.bat files --> END
OnAbort()
Does anybody know what could be apossible reaosn for this failure?
Please note I have admin rights on my PC.
thanks
Fabio

regsvr32 "ole32.dll" - OK [DllRegisterServer in ole32.dll succeeded]
regsvr32 "oleaut32.dll" - OK [DllRegisterServer in oleaut32.dll succeeded]
regsvr32 "olepro32.dll" - NOT OK [LoadLibrary "olepro32.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "msxml3.dll" - NOT OK [LoadLibrary "msxml3.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "BkMrk.dll" - NOT OK [LoadLibrary "BkMrk.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "CDDBControlNokia.dll" - NOT OK [LoadLibrary "CDDBControlNokia.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "CDDBUINokia.dll" - NOT OK [LoadLibrary "CDDBUINokia.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "CDSAccess.dll" - NOT OK [LoadLibrary "CDSAccess.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "CommonDS.dll" - NOT OK [LoadLibrary "CommonDS.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "CommonSelectDevice.dll" - NOT OK [LoadLibrary "CommonSelectDevice.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "ConnectionManager-BTPlg.dll" - NOT OK [LoadLibrary "ConnectionManager-BTPlg.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "ConnectionManager-SerialPlg.dll" - NOT OK [LoadLibrary "ConnectionManager-SerialPlg.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "MMSSetup.dll" - NOT OK [LoadLibrary "MMSSetup.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Nokia.dll" - NOT OK [LoadLibrary "Nokia.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "PCSSupportSetup.dll" - NOT OK [LoadLibrary "PCSSupportSetup.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "PhoneBrowser.dll" - NOT OK [LoadLibrary "PhoneBrowser.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "SearchEngine.dll" - NOT OK [LoadLibrary "SearchEngine.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "vCard.dll" - NOT OK [LoadLibrary "vCard.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Wadrb.dll" - NOT OK [LoadLibrary "Wadrb.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "SyncControl.dll" - NOT OK [LoadLibrary "SyncControl.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Progress2.dll" - NOT OK [LoadLibrary "Progress2.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Notes50_11.dll" - NOT OK [LoadLibrary "Notes50_11.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Org50.dll" - NOT OK [LoadLibrary "Org50.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Outlook2.dll" - NOT OK [LoadLibrary "Outlook2.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "OutlookX.dll" - NOT OK [LoadLibrary "OutlookX.dll" failed. GetLastError returns 0x0000007e]
regsvr32 "Synch.dll" - NOT OK [LoadLibrary "Synch.dll" failed. GetLastError returns 0x0000007e]
I executed commands one by one this time, waiting for one to complete before running the following, and I didn't get anymore the "MSVCR71.dll was not found" error...
In any case, these are the msvc dll versions:
msvcp71.dll 7.10.3077.0
msvcr71.dll 7.10.3052.4
I also tried to execute again the first (ole32.dll) at the end, and it succeeded.
It took about 20-30 seconds for each regsrv32 command to complete, either with success or not, also witout any dll given. Is that normal?

Pcsuite problem with connection "oxc0150004""

yesterday I tried to install nokia pc suite 7.1.30.9 (italian version) on my new notebook dell studio xps13
(this computer is a substitute of a unlucky one with some problems with cd reader). in the previous one I didn't have any problems using the pc suite.
instead, yesterday, after completing the installation, the program crashed when the connectivity program (pcsinc) started (giving me this error "oxc0150004") and, when I try to connect any phone the program crashes again.
I have a nokia 6290, notebook with vista32bit and i wanna connect the phone by usb
it's very strange... can you help me?
sorry for my english

The obvious starting point is 'do it again', so please reinstall the program.
If you already tried it, then there's another thing.
As you have Vista, one thing sometimes helps is to right-click on the installation program, a menu popsup, and choose 'execute as administrator'. That gives the installation program all the rights it needs.

Problem with a nokia 5310 xpress and a bluetooth

i have problem with a nokia 5310 xpress and a bluetooth!i can transfer anything from my phone to pc with or without pc suite! but when i want to transfer files from pc to phone i doesen"t work! with pcsuite soethings work but very slow! i want to transfer files witout pcsuite !
the blue tooth adapter it is dongle and it the software that i use is BlueSoleil 2.6.08
CAn anyone help me?

I'm having bigger problems...
the screen goes all white and off after a lil while....
Not even the vendor could do anything....

N95 Problems with connectivity

Hi there, i have problem with Wireless, GPS.
Wi-Fi is killing the phone - it restarts itself, if it don't, i get error: No gateway reply.
GPS:
GPS satellites are just not responding...Everywhere...I cant get anything to work, If i doing something wrong, please help!
Plus, Nokia Software Updater,miss newer firmwares, i have V 31.0.017, and V32 is out

Latest version of pcsuite can be downloaded from www.nokia.com/pcsuite.

Nokia 6230 loses connection with PcSuite using DKU...

I got tired of trying to solve connectivity problems
with the bluetooth device and bought a new cable.
It seems that neither the Bluetooth or the Cable can transfer more than a few MegaBytes in one shot ("Connection to mobile phone lost").
I have also upgraded to Pc Suite 6.83, still no luck.
I'm Running Windows XP Home Edition SP2.
Suggestions?

I'm transferring the files via File Manager (PcSuite) or
using the Nokia driver itself. I'm transferring mp3 files, around 12-13 each time (a full disc). The mp3 files are usually around 2-3mb each...
Thanks.

OVI Suite problems with N97

Hi,
I have received my new N97 and installed the bundled OVI Suite.
All went well and it found and conected to my phone and I played with it for around an hour or so.
I reconnected later in the day and the suite would not start automatically as before or recognise the phone when i searched for connected device.
I have turned my phone on and off and restarted my PC but it still won't recognise the phone.
I seem to remember having this problem with my N95 and a version of PC Suite but that was a couple of years ago and I can't remember the solution (if there was one).
Any help would be much appreciated.
Dave

The ovi suite thats supplied with the phone is a bit unreliable.
Try using PC suite instead or the new ovi suite beta.
www.nokia.com/pcsuite
http://betalabs.nokia.com/betas/view/nokia-ovi-suite-20

Pc suite problem with 6280

hi, can someone please help me with my problem with my pcsuite, my phone is conncted but via cable but when i backup my content, or use file manager or sync my phone it cant find my phone and still initializing my phone and nothing happens from there...

I have 6288, and the latest PC Suite is not working. First all seems to go OK, but then the phone/PC connection goes off and on by itself acouple of times and at last the phone shuts down. Great!
The old PC Suite version worked fine, so this is negative progress. **bleep**.
Does anyone know what to do?

Problem between PcSuite and Bluetooth Mouse

I'm having a very odd problem.
I have a Microsoft Notebook Bluetooth Mouse 5000 that works perfectly in my bluetooth enabled DELL Inspiron 1520 running Windows Vista Business, but after I install ANY version of PcSuite (even the NSeries one) to connect my N73ME using bluetooth, the mouse starts to LAG. If i uninstall Nokia PcSuite, the mouse lags stops.
I have tried it in a different computer, with a different OS, etc., but the problem is the same .... after i install PcSuite, the problems begin.
Lately, i have noticed it doesn't affect only my bluetooth mouse, but bluetooth in general, for example: while transfering file between 2 pc, if i have nokia pcsuite installed, there is a chance that the transfer fails.
There is something wrong with PcSuite's bluetooth driver.
Thank you for clicking on the Green button with the white Star for Kudos!!

I have exactly the same problem: my Logitech MX Revolution mouse lags badly whenever PC Suite is running. I am using PC Suite version 6.85.14.1 via both Bluetooth and USB cable to connect to my Nokia 6300.
I can confirm that if 'ServiceLayer.exe' is running in Task Manager (it starts several other executables as well) then the problem occurs.
If I kill ServiceLayer.exe the problem is solved, but do anything in Explorer and it restarts itself with associated programs and problem is back - even if it is set to 'Manual' in services.msc.
If I disable ServiceLayer.exe and manually stop the service in services.msc the problem is solved but PCSuite won't work of course, so this makes it impossible to run PCSuite normally - I have to disable and re-enable services.
I have written two cmd files to disable the service, and rename the ServiceLayer.exe to something else (for some reason it was starting up again even if disabled in services.msc: it's very tenacious), and vice-versa, but OMG what an ugly solution!!
This shell integration needs to be optional: the program should be able to start without all this grief!
el
Message Edited by eloquentloser on 10-Feb-2008 07:06 AM

Problem with my Inbox after restoring the backup

Hi,
I've bought N73 a few days ago and tried to restore my backup from the old 7610 (Messages and Contacts) with PCSuite 6.84....
Everything was all right except the Inbox...
All of the messages have the sender's number instead of their name!!
This problem is only in my inbox, in the sent section i have the messages with contacts name.
I tried to sync my phone with PCSuite, wondering, there was the sender's name..!!
Still in my inbox there is no sender's name for the old messages, but new ones come with their name.
What can i do to adjust it, having the names instead of the numbers, for my restored messages?
Thanks a lot!

Any idea!?

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

Problem with PCSuite 6

Similar Messages

Maybe you are looking for