Problem with personnel number

Hi all,
I deleted all the personnel number using the Report RPUDELPN but know when I tried to generate the hiring process again I get the personnel number from the position where it was deleted.Let me explain this....
Suppose I deleted the number from 2-30 now when I start the hiring process again I just get the personnel number starting from 31 but I need to get it generated from the very beginning .
Thanks all
Regards
Navratan

Hi Navratan
You will have to reset your Number Range status for this. Basically change the next number to be generated by the number range.
SPRO --> Personnel Management --> Personnel Administration --> Maintain number range intervals for personnel numbers --> NR Status
Reset the NR Status number to 4

Similar Messages

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Cannot contact the Adobe Service, I have a problem with the number.

Hi,
I would like to have more information in regard of the Adobe DC. My intent is to buy the product and use it in my office, we are a small company (4 PC).
If I'm not wrong I should take the Standard Plan for Business, but I cannot arrange any payment request for information because I have a problem with the number I am supposed to call.
Is there any other way to know if this software suit fine for me and my company, and most of all how much it will cost.
Thank you for your consideration.
Have a nice day!
I look forward to hearing from you.
Best,
Augusto

Hi Avgvstvs67,
Please refer this link : https://acrobat.adobe.com/in/en/pricing/business-pricing.html
Regards,
Rahul

Network confirmation with Personnel number

Hi,
In project systems, While confirming the Network with personnel number, the planned cost is calculating based on Activity rate maintained in KP26. However for actual costs, the calculation is from HR I assume. Am I right?
If it is from HR, where in HR the time sheet rate is maintained for the personnel number?
Thanks,
Prabha

Hi,
I got the answer.
FYI
If the network confirmation is entered with the personnel number, the system is looking for the "Position" in HR master and based on that it is picking the workcenter assigned with this resource. So the cost is from the activity assigned in the workcenter even though the network is confimed with a different work center.
Thanks for your responses, it helped me in tracing out this issue.
Regards,
Prabha

Problem with user number

Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right, appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
Waiting for an answer, thank you.

Hello scricciolina90
Welcome To Support Forums
On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Adhoc query-Problem with Personnel no output field

Hi Gurus,
We are trying to run an adhoc query using a customized Info set(PNPCE logical database).
While running the query,we had selected Personnel no(from Payroll status P0003 table) as output field and Company code(from Org assignment P0001) as input field in the selection.
Problem is in the output field we are seeing the Personnel name details in place of Personnel no.Could anyone please suggest what could be the reason behind this and how to fix it.
Your help will be highly appreciated.
Warm Rgds
Sushil

Hi Sushil,
The default output for fields with a text and a value (Name = text, PERNR = value) is the text. You can change this by right clicking on the output box in Ad Hoc and selecting "Value". If you want both name and number, select "Value and Text".
You can also change this default to Value from Text if in Ad Hoc, you go to Edit --> Settings. On the last tab, change the radio buttion for output default to Value from Text. This will change it for all fields so you would see the eight digit number rather than the name of the position or org unit. Thus, you may want to keep it at Text and use the right click to change specific fields as needed.
By the way, it is usually best to utilize the personnel number field from IT0000-Actions, although it can be obtained from any infotype if you include that field in the field group when creating your infoset.
Paul

Problem with Serial Number from MSi ATi HD4870 :/

Hi all,
I have problem with my HD4870. I lost the serial number (the small paper on back of card) from card. Have I any chance to get it back? I can take a photo and post it here some S/N and P/N from card, if it helpfull... I lose my warranty, if I can't get it back
So, any choice to get it?
Thanks for answers,
Mirek.

Thanks for answers in first,
I have problem with card - I had it two days in Crossfire with another HD4870 but accidentally when I played Metro 2033 I got some stripes on monitor (purple, blue) and then PC stop working. I had to restart PC and when the system booted to Windows, until 10 second I got the same stripes on monitor. Then my PC didn't boot.
On my card I have 4 diodes - when I turned on pc, the diodes blinks but now blinks only TREE of FOUR diods.. So I took the card to shop when I bought it, but the shop-assistant told me, that I need this little paper on Card.. :/
I'm from Czech Republic, so I have a little problem with directly contact to HQ of MSI
So I have to go again to the shop and tell them, that Serial Numbers what they need are in card?

Problem with serial number and installing PSE 12

I purchased Adobe PSE 12 yesterday and the purchase went through. But I never received a confoirmation email from Adobe. Now, when I try to enter the serial number to install, I'm told there is a problem with the serial number and I must contact customer support. Can't get through to customer support though. What should I do? I desperately need to get this program installed. Thanks.

Hi 2Summers,
Please provide me the serial number and I will check it for you.
Send me aprivate message. Do not post it here.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Problem with serial Number in Inspection Lot

Dear All,
I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
*Stock data of serial number XXXXXX not suitable for movement
Message no. IO231*
All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
Any Idea to rectify that problem?
Thanks
Edited by: Ashu on Aug 9, 2010 5:54 PM

Hello,
Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
for inspection type 4 for GR of Production order.
Regards,
JayaVimal

Problem with random number generation

hey forum, i wonder if anyone can help me out with a small problem with my university coursework (yep its homework!!!)
heres my problem, i am writing one of them 8 puzzle problems (the one based around sam lloyds 15 puzzler), i can successfully generate one random sequence of numbers with no duplicates, but whenever i call the random method again it keeps producing the same results
heres the code
in my main class file
if(e.getSource() == randomButton) {
      new RandomPuzzle();
      System.out.println(random.randState);
      //startStateString = new RandomPuzzle();
}heres my number generator class file
import java.util.Random;
import java.io.*;
public class RandomPuzzle
     /** Base Random number generator */
    Random rn = new Random();
    /** Puzzle holder */
    byte b[];
    long number = 0;
    String randState = "";
    /** Default constructor */
    public RandomPuzzle() {
        rn.setSeed(number);
        b = new byte[9];
        randState = randomString();
    /** Provide range for generation */
    public int rand(int lo, int hi) {
        int n = hi - lo + 1;
        int i = rn.nextInt() % n;
        if (i < 0)
        i = -i;
        return lo + i;
    /** Set size for array */
    public int rand( int hi){
        int n = hi;
            return n;
    /** Check for duplicate values within the same configuration */
    boolean valueExists( byte value ) {
        int i = b.length;
        boolean exists = false;
        for( int j = 0; j < i; j++ ){
            if( b[j] == value )
                exists = true;
        return exists;
    /** returns the actual string */
    public String randomString(int lo, int hi) {
        int n = rand( 9 );
        //boolean valueEntered = false;
        for (int i = 0; i < 9; i++) {
            boolean valueEntered = false;
            byte temp = (byte)rand('0', '8');
            while( valueEntered == false ) {
                if( !valueExists( temp ) ) {
                     b[i] = temp;
                     valueEntered = true;
                else
                    temp = (byte)rand('0', '8');
        return new String(b, 0);
    /** calls above function */
    public String randomString() {
        return randomString(0, 8);
}i've tried for hours to work this out, but i am stumped. if anyone can point me in the right direction, maybe point out the problem code and give one or two tips i would be forever in your debt
thanx in advance
korbitz

thanx for the help paulcw, but when i removed the seed code it done the same
but i added this to my main class and now it works fine
if(e.getSource() == randomButton) {
               RandomPuzzle temp = new RandomPuzzle();
               System.out.println(temp.randState);
               //startStateString = new RandomPuzzle();
          }thanx again for your help

Problems with Personnel Cost Planning

Hi all,
i have problems with the Personnel Cost Planning specifically with the Quota planning (infotype 1019).
i save data in the infotype 1019, Quota planning, for a organizational unit and in the infotype 1005, Planned Compensation, i save data for a job (i also tried with positions), but i can't value the cost for the organizational unit.
maybe I'm missing some setting or I'm doing something wrong.
Thanks

Joanne,
Are you still having issues with BI-IP? I have been troubleshooting with the basis folks in getting BI-IP up on a new system over the last few day to a week and have now gone through the process myself whereas before I had been given a system already set up. I have enclosed some troubleshooting feedback with my counterpart in getting the system up.
What type of issue are you having?
Can the basis folks start the planning modeler or planning wizard in RSPLAN even if you can't?
1. The note mentioned above 919850 and the help documentation in SPRO under
SAP NETWEAVER->Business Intelligence->BI Integrated Planning
are very helpful. They have to set the following Jco Destinations in Web Dynpro Content Administrator:
BI_MODELDATA
BI_METADATA
WD_ALV_MODELDATA_DEST
WD_ALV_METADATA_DEST
And the problem was the connection to the message server. It was not possible to connect without having a Logon group assigned. This had to be done in WI4 ABAP as well as in the SLD for this system. After that assignment connection was no problem.
2. make sure you have the portal ips in your host file.
3. have they have created an account for you in client 001 of the NW04S?
4. Have they created a portal id for you and assign the portal role com.sap.ip.bi.business_planning_showcase to you?
5. have they configured the setting for starting the planning modeler (also under SPRO)..
Hope this helps. If you have more specific questions, feel free to e-mail me directly.
Mary

EIC: Employee search - wild card search with personnel number

Hi,
The employee search functionality in EIC employee-search screen allows to search an employee through wild card search. We had set up this and everything was working fine, but suddenly the functionality to search an employee by giving part of personnel number as wild card search is not working, surprisingly other search criteria are listing employee list. For example, if i need to search an employee with personnel no 30000111, then i can give 30* in search criteria and employees starting with 30XXXXXX would be listed. This is the functionality not working at the moment.
Can anybody please help - what could be the probable cause or where should i look to fix this? Any documentation in this regard would really be helpful.
Thanks in advance.
Sujit

hi,
Probably u can set a debug point in the bsp application and ask your abaper to debug the same.
check if any patch application has been done after you saw the functionality working fine.
Regards
Sameer

Problems with the number three on the keypad

iphone 4: When I dial a phone number, all of the digits on the keypad work correctly. When prompted to enter an account number or PIN, or choose an option from a menu after I get connected to my party, the number three key often does not register. I thought I might have dropped the phone or something so I tried my wife's iphone 4 and it has the same problem as mine with the number three. Is there a "fix" or workaround for this and am I the only one with this problem?

But this is all me, and I do A LOT of scrolling back and forth to cross check facts and so on. Having to constantly switch between files would be a huge pain.
I guess it's a matter of work styles, but I'd much prefer to switch around among a batch of open chapters with a simple key combination, as opposed to scrolling back and forth through pages in linear fashion.
How would ID handle a document of this complexity?
With the limited information you've offered, I'd say I have experience with similar documents, (product catalogs/pricelists), that ID handled just fine, and other cases in which seemingly simple files choked it. I can say the same of Quark. No one can answer your question definitively; there are too many variables. Chances are it's not (only) the size and complexity of your document in itself that are causing your problems. There can be any number of hardware or OS issues contributing, to name a couple.

Packing instructions - problem with external number range

Hi Gurus:
I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
I appreciate your valuable input
Tamas

For further records:
we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

Problem with Skype Number

Is there any people in skype to help out this issue, give some response please its very important, i gave all my coleogues my skype number so i cant able to contact them..i wish you will sort out this problem as soon as possible...
thank you
Subject/title amended from "fault," for clarity.
thasriq

Hi, Thasriq, and welcome to the Community,
Please check the information presented in this FAQ article to see if this does not resolve problems with your SKype Number not receiving calls:
https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number
If these steps do not work, please contact Skype Customer Service directly for further assistance in testing the number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Problem with personnel number

Similar Messages

Maybe you are looking for