Problem with PGI - Sales Order stock does not exist

Hi
I created order 58161 with 1 item line (10).
Did a delivery and created a Picking Request (which i released via transaction VL08).
When i try to do PGI i get following message:
Sales order stock 58161 000010 does not exist.
I have previously done a similar order with same material and so on and it went through the system without a hitch.
I have checked the other threads, is this where i have to use MB1B and mov.type 412 E to move unrestricted goods to sales order stock?
Thx
RM

Hi,
first u check stock at tcode:MMBE for ur material ,plant and storage location.If u dont have stock than create stock through goods receipt:mb1c.[movement type 501 e,enter ur sales order no.,item no.],I think it will solve than

Similar Messages

Sales order stock does not exist error during PGI

dear sir,
we have two plants 1010 and 1020,we are using variant configuration for our finished goods
we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
how to resolve this
thanks and regards
srinivas pai

There can be two reasons for these kind of error
- Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
- Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
In either of the case, you have to again do the process.
Hope it can assist you.
Thanks & Regards
JP

Sales order stock does not exists

Dear All:
I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

Hi,
Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
Regards,
Saju.s

Sales order stock does not exist

Hi All,
In MTS scenario also while doeing PGI against a sales order/delivery the system is giving error prompt "sales order stock does not exist"
What could be the reason? Pls suggest
rgds

hi
goto MB1b here issue the raw material against the sales order no
now do the PGI
regards
KI

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

COGI Error-Sales Order Stock does not exist

there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
what might be the problem?
how can i fix this?
could anyone help plz

hi
as your scenario is MTO , when you run MRP for sale order all the componnets under finished product will get DEP req against the sale order,
so at the time of goods issue system check the stock for a component agaisnt the sale order. even the stock is vaible in unrestricted.
1.check for the component when you run MRP system might generated Purchase req(in case external procurment) or planned order(in case both procuremtn) you need to procure ord produce , so when you do GR for them stock will be against the sale order.
or
2.you can bring sale order stock by doing MB1B - using movement type 411 E.(transfering stock Unresticte stock to sale order stock)
-ashok

Problem with 5.2 install - idsgroup does not exist

All,
I am trying to install Sun ONE Directory Server 5.2 on a new Cluster. The idsuser and idsgroup have been both setup with the id 10000.
I have created a silent install file to work with the ./setup -noconsole -nodisplay -state silent.inf command.
When I run the command as idsuser - but the setup command has been sudo-ed - I get the following error:
Idsgroup does not exist.
Ive done a grpck and a idchk and both have come back as being OK? Is there an issue where the install will only work if you run it as Root and not sudo-ed?
Both group and idsuser show in the correct way in /etc/group and /etc/passwd.
Any ideas would be gratefully received as this is now becoming quite urgent.
Thanks
og

All,
I am trying to install Sun ONE Directory Server 5.2
on a new Cluster. The idsuser and idsgroup have been
both setup with the id 10000.
I have created a silent install file to work with the
./setup -noconsole -nodisplay -state silent.inf
command.
When I run the command as idsuser - but the setup
command has been sudo-ed - I get the following
error:
Idsgroup does not exist.
Ive done a grpck and a idchk and both have come back
as being OK? Is there an issue where the install will
only work if you run it as Root and not sudo-ed?
Both group and idsuser show in the correct way in
/etc/group and /etc/passwd.
Any ideas would be gratefully received as this is now
becoming quite urgent.
Thanks
ogHi ,
Did you get this figured out yet? I'm facing the exact same problem. Doesn't seem to make any sense.
Thanks,
Tito

Third party process with Valuated sales order stock

Hi All,
We have third party sales order process with valuated sales order stock. The problem is that in the theird party PR which is triggered directly from the sales order it determines a stock account which is assigned to the BSX key in OBYC.
But since this is third party processing as per my understanding a consumption account assigned to key GBB-VAX (since account assignmnt category is X) should get determined, so that when the GR is done against the PO a consumption posting is done in the background.
I am not able to understand if the system is determining the stock account due to the fact that it is valuated sales order stock and if so, what should happen after GR. Should we have a stock created for the material which is physically directly delivered to the customer?
Regards,
V S

Hi,
Check GBB-VKA which is defined in OME9 for your ''E'' Account Assignment Category that SAP will debit upon GR posting
Also check "X" GBB-VAX and the G/L account assignment in OBYC
The posting on GR should be debit KBS -Credit GR-IR
Thanks
Diwakar

Why some times delivery will created through vl10c even sale order stock is not available?

Hi,
why some times delivery will created through vl10c in batchmode even sale order stock is not available?
Thanks,
Kalyan.

the correct english name is : Replenishment leadtime
Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

Need to create a sales order that does not create demand

Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SM

Hello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak

Sales order stock is not valuated

hi
the sales order stock is not coming valuated as i m using make to order startegy in finished goods can anybody suggest me as i have checked the account assignment cateogary for different goods movement but still the cost is missing plz suggest me the path to follow to get the sales order stock valuated
thanks and regards
surendra choudhary

The reason is,
COR3 - Open your Production or Process Order
Go to Goods Receipt Tab
'Goods Receipt, Non-Valuated' tick mark will be there.
Go to 'Header' dropdown > Select 'Settlement Rule' > Category will be 'SDI'
GR Non valuated seems to be default behavior of the system.
If above tick & Settlement rule 'MAT' can be set then this problem can be solved.
Regards,
Chintan

I have a problem with my ipod touch it does not light at all, what should I do?

I have a problem with my ipod touch it does not light at all, what should I do?

Try the troubleshooting here for your specific symptom:
iPod touch: Hardware troubleshooting

While creating sales order stock should not go under reserved block,

While creating sales order stock should not go under reserved block,
What is the customization?
Please help me.

Hi,
What exactly is your requirement?
Can you be a bit more detailed?
Thanks

Sales document 187000001 does not exist

Sales document 187000001 does not exist
Message no. VB001
Can you please advice why this error occurs? I am creating sales order (RE) type with reference to actual sales order, during reversal process all the docuemnt generating but still not showing document deleted Archive
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
4. Billing Docuemnt Generated
Regards,
Vijay Sanguri
09324905500

I am creating sales order (RE) type with reference to actual sales order
First of all, this itself is wrong. Why you were creating return order with reference to original sale order. You should always create a return order with reference to billing document.
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
Again, I dont know why once you have done PGI, why you have created a return delivery ??
thanks
G. Lakshmipathi

BAPI_ACC_DOCUMENT_POST - Int.Order -E/KO/104/Order 400001234 does not exist

Hi Experts,
Am using BAPI_ACC_DOCUMENT_POST to post the docs, working fine, with populating min. fields in min. structures.
But, in some cases, am populating INTERNAL ORDER into ACCOUNTGL-ORDERID field, but, am getting an error, saying
E- KO-104--Order 400001234 does not exist
But, with the same input data, the FB50 is working!!!!!!!!!!!
So, pls. let me know How to fix it?
Is there any other field I hv to populate along with ACCOUNTGL-ORDERID, when am using INTERNAL ORDER?
thanq

Srinivas,
i am expecting the error might be converion problem. Please check for conversion routine for AUFNR(Internal Order) Field, before filling it to G/L Item table (before passing to Function module)
CONVERSION_EXIT_ALPHA_INPUT
CONVERSION_EXIT_ALPHA_OUTPUT
Some time back i have similar problem. it was solved after using converion routine before filling the G/L Item internal Table. this might be helpful for you
Thanks
Sekhar.

Problem with PGI - Sales Order stock does not exist

Similar Messages

Maybe you are looking for