PROBLEM WITH PHOTOMERGE PANORAMA IN PSE 12

whenever I try to use photomerge panorama in photoshop elements , i get an error message :Error 48: File or folder does not exist. line :41. i have been trying for few days after retsarting my laptop and also updating the PSE 12

This means that the photomerege function is having difficulty reading the required scripts to run. Have you made any changes to PSE or installed any add-on's that may have affected the presets?
I think the best thing to do is to uninstall Elements and then re-install again.

Similar Messages

Problem with photomerge exposure

I am trying out the trial version of PSE 8. When I try to use photoexposure merge, the program will merge the two photos perfectly, but when I click the Done button, I get a Runtime error box saying the program has to close. This has happened twice with the exposure merge, but did not happen with group picture merge (although the group merge failed to merge the pictures twice when I clicked done, then succeeded the third time I tried). I am using Windows XP.
Thanks, Terry

Rebooting worked; thanks again for the suggestion. Being new to the forums, I cannot figure out how to indicate on the discusson web page that my question has been answered.
Date: Sun, 1 Nov 2009 08:43:31 -0700
From: [email protected]
To: [email protected]
Subject: Problem with photomerge exposure
Photomerge Exposure has a bug with images larger than 10 megapixels, but yours are smaller than that. The known symptoms are different too (the automatic alignment fails), but with bugs, you never know.
Have you tried rebooting your machine? Photomerge Panorama sometimes behaves erratically and rebooting sometimes appears to make the erratic behavior go away.
>

Photomerge panorama in PSE 12 chops off part of final image?

I've tried several times to stich together 4 images in Photomerge panorama using PSE 12. Every time the right edge of 4th image (the right-most) is chopped off (I'd guess about 25% of the image is lost). I've tried the "Auto" and "Perspective" settings. The "Cylindrical" setting turns the panorama to garbage, with one image at the top and the other three at the bottom of the final composition.
I was able to stitch together the same four images in PSE 9 without any problem.
Anyone have any ideas on how I can get Photomerge to include all of the 4th image in the panorama?
Thanks.
Rick

It's really hard to tell without seeing the photos.
Is it possible you could post the the photos somewhere, so someone here might give it a shot?
(something like Dropbox)

Need help with PhotoMerge Panorama

Can someone help me with PhotoMerge Panorama in PE 13? I upgraded from version 6 and now cannot adjoin separate images into one image. Every time I try I get this message: "Panorama could not be created as some images could not be automatically aligned". In version 6 it would allow me to position the files together manually if the program couldn't figure how to do it automatically, but that feature doesn't seem to be available in version 13. Thanks for any help.

I think i saw the link about interactive layout missing:
http://forums.adobe.com/message/6011038
So maybe i should try lower version of PSE... i hope it is available.
To mytaxsite:
Thanks for your reply... maybe the link you gave is referenced to another PSE version...
About the suggested blank canvas... maybe I could try... but this involves many images which is hard to do when switching between windows.... but i'll give it a shot.

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problem with Photomerge Exposure, Photoshop Elements 13?

Problem with Photomerge Exposure, Photoshop Elements 13?. Why does Photomerge Exposure not give me a finished DONE photo. If I open 2 photos, it will merge then, and when I press DONE I get a new photo file that I can save. However, if I open 3 photos, and go through the same process, the software analyzes the photos, I get a new image, BUT when I press DONE, the new image vanishes???? I can open the same 3 photos in Elements 8 and it works fine. any ideas please.

I, too, am having problems in version 11 with Photomerge Exposure. I can merge the 3 photos successfully with version 10. In version 11 when I click done, I am taken back to the Expert mode of the Editor but the merged photo in the photo bin is not accessible. When I first return to the editor, one of the original images (before merge) is selected. When I double/click on the merged photo it doesn't become the active image. In fact, any image I double click on momentarily becomes the active image and then jumps to another one.
The merged photo is visible in the photo bin but I can't select it.
I am running version 11 on my MacBook running OS 10.6.8
Mary Lou

Problem with Photomerge after Update CC

Hi Guys,
have anybody the same problems with photomerge out there since new PS CC update 6 days ago?
Photoshop cant stich the pics. PS missed the last step "nahtlose komposition erstellen".
What can i do?
System:
Mac Pro (2013) *whoop whoop
Regards
M

I finally found how to resolve this bug :
Delete those 2 files :
> MACHD/Library/Application Support/Adobe/AAMUpdater
> MACHD/user/(nom de session)/Library/Application Support/Adobe/AAMUpdater
Then, delete the creative cloud application & reinstall from here (France) > https://creative.adobe.com/fr/products/creative-cloud
Everything is ok for me with the full new update CC 2014 now.
Good luck+++

Help with Photomerge Panorama

Hello,
I can't find what i'm looking for in the discuission so I post here.
My problem is I want to have an image stitching software that is not expensive and easy to use.
I try to do it in Photoshop Elements 12 (PSE12) as trial software.
As I can see, the photomerge in PSE12 tend to find the overlap between images...
Unfortunately when it can't, it makes the image to overlap each other... which makes it more difficult to arrange pictures.
I like the old style in photoshop CS2 where you can do the stitching manually and save tile position as PMG (photomerge) file.
Can I do this also with PSE12?
What I mean is... can I teach PSE12 the correct position of image for stitching?
Also can I save the Photomerge project so I could revisit in case there is problem with stitch results which is not noticed earlier?
By the way, our images are taken from microscope with almost fixed overlap (repeatable with just few microns of error).
Edit: (additional)
I saw this help document: http://helpx.adobe.com/photoshop-elements/using/stitching-together-panoramas.html
I says there is an option of "interactive layout":
"Interactive LayoutChoose this option to open the source images in a dialog box and position them manually.'
I think maybe this is what I need... but it is not available in PSE12, is it?

I think i saw the link about interactive layout missing:
http://forums.adobe.com/message/6011038
So maybe i should try lower version of PSE... i hope it is available.
To mytaxsite:
Thanks for your reply... maybe the link you gave is referenced to another PSE version...
About the suggested blank canvas... maybe I could try... but this involves many images which is hard to do when switching between windows.... but i'll give it a shot.

Interactive Layout mode no longer available in Photomerge Panorama in PSE for Mac - any workarounds?

Hello, after having purchased a download of Elements 12 for Mac, I found out that the Interactive Layout mode in Photomerge Panorama was no longer available (it was available in earlier versions, such as Elements 11). Is Adobe able to exchange my version 12 for version 11, or is there some other way I can gain access to Interactive Layout mode? I have found that the Auto layout mode often results in a message that it cannot align the images to create a panorama. Thank you.

In photoshop cs6 give this a try:
1. Go to File>Scripts>Load Files into Stack, browse and load the pictures for the pano with the Attempt to Align and Create Smart Object unchecked
2. Increase the canvas size of the document with the Crop Tool holding down the Alt key and dragging
    one of the crop corners out until you think the canvas is big enough to arrange your documents for the pano.
3. Align the layers manually in the document window with the Move Tool as good as you can.
   (you can lower the layer opacxity so you can see the alignment better, but don't forget to put all the layers back to 100% opacity)
4. Select all the layers in the layers panel
    (Select>All Layers)
5. Go to Edit>Auto-Blend Layers and use Blend Method>Panorama and Seamless Tones and Colors
6. After the blending it's possible you might see some whats looks like seams, so press Shift+Alt+Ctrl+E to make a merged copy on a new layer and hopefully that'll
    get rid of the seams.
I'll make another post with directions for putting the plugin into photoshop cs6, since you probably don't want to install pse 11 just to get a plugin when
photoshop cs6 is so much more capable than elements, for panoramas anyway.

Photomerge panorama in PSE 12 includes only 2 of 3 images in finished panorama?

Using PSE 12--Several times I've tried creating a panorama with Photomerge. I'm usiny 3 images. Every attempt results in a final panorama of only the 1st two images. Any direction on how to get the beast to include all 3?

It's really hard to tell without seeing the photos.
Is it possible you could post the the photos somewhere, so someone here might give it a shot?
(something like Dropbox)

How to open Photomerge Panorama in PSE 12. The option is not available when I choose File/New.

In PSE 12 (iOS) I can't find "Photomerge Panorama". The tutorial says it should be available in the menu File/New. Yet it isn't.

It's now under the Enhance menu in the Expert mode in the pse 12 editor.
Edit>Photomerge in the pse 12 organizer.

Problems with Uploading photos in PSE 7

I've had nothing but problems with PSE 7. It is pretty slow and crashes once every half hour or so. I tried loading 8 but after it crashed numerous times and wiped out some previous work I took it off. I bear with the poor functionality of PSE7 but now I can't upload any albums to PS.com. I've uploaded over 16,000 pics and numerous albums before with no issues but now it's locked me out. I've checked and done ALL the obvious things but I'm missing something. I have over 60G of space left so no space issues. I know it must be something that I'm doing. Is there as easy way to get help ... someone to speak to maybe as this is really frustrating. I want to work with this program but it is way too difficult for me ... and I've taking classes to help.
Any thoughts or help would be greatly appreciated. Dan D

Mark ... Thank you so much for replying. Interestingly enough 3 of the 4 albums that I was trying to upload ... went through last night. That was almost 10 days after I created them and loaded the album onto my organizer. As for a few details ... here they are;
     ... each of the four albums were anywhere 30 to 57 photos @ about 4-6 MB each photo
     ... they were created around 10 days ago
     ... each time I created an album I made sure that I went through the process in its entirety as sometimes the organizer CUTS you off midstream (then the result is NO upload)
     ... when they didn't upload I tried reloading (a few times) them onto PS.com by recreating them.
     ... last night 3 of the albums went through and uploaded BUT ...
          ... album #1 was repeated twice
          ... album #2 was uploaded only once
          ... album #3 was repeated 3 times (once with a different name as I tried changing the name once to "solve my problem"
          ... album # 4 didn't upload
     ... I have an 100G account and have used about 24G of space
I have just tried to upload the 4th album.
I appreciate your help. I am convinced that it is a server issue with PS.com as I've done this 31 times before. If you have any thoughts whatsoever I'd appreciate them very much.
My albums are at ...   www.photoshop.com/user/dimaggio   The first 6 you see are the albums in question ... unless my forth album downloads.
Thanks again,   Dan

Fehlermeldung bei photomerge panorame in PSE 7

Bei mir erscheint beim Aufruf von Photomerge Panorama die Fehlermeldung:
Error1; Unable to create Window
          - Interner Fehler
          Line 364
          > var w= new window(res;
Der Klick auf OK bricht den Vorgang ab.
Weiß jemand Rat?

Hallo Knorrli - Deine Meldung ist bei mir gelandet
Ich habe damit überhaupt nichts zu tun. Adobe hat im Forum Mist gebaut!
Ruf doch bitte bei Adobe an!
Wilhelm
Am 05.05.2009 um 18:08 schrieb Knorrli:
>
bei Aufruf der Funktion Datei / Neu / Photomerge-Panorama stürzt
PSE7 ab mit folgenden Meldungen:
++++++++++++++++++++++++++++++++++++
Error 1: Unable to create Window - interner Fehler.
Line: 364
-> var w - new Window(res);
++++++++++++++++++++++++++++++++++++
>
brauche dringen eure Hilfe ich weiss nicht mehr weiter.
vielen Dank im Voraus Heinz
>

Error with Photomerge - Panorama in PS CC

Error while doing Photomerge -> Panorama in Photoshop CC. I get the following message: "Error 8800: General Photoshop Error occurred. This functionality may not be available in this version of Photoshop."

Alright, links to DxDiag and screenshots of my cache settings, memory and multiprocessing settings, and my drives that I have for my PC are linked down below. My 250gb SSD includes my OS, all my programs, and my cache for After Effects. My mechanical hard drive includes all my data, so videos, pictures, documents, music, projects, and all my PC games. I hope this helps. Thanks again.
DxDiag: http://puu.sh/eYus7/52186a376e.txt
Screenshots: http://puu.sh/eYuAD/c161a2340f.png

Photomerge Panorama in PSE 6 - Interactive Layout not completing

I'm attempting to merge ten photos into a panorama using Photoshop Elements 6.0 on Windows Vista, and am having some problems. At first, I tried to merge the photos using the Auto Layout function; while this option completed, Elements wasn't able to line the photos up correctly, and I couldn't figure out a way to move the photos around using the Auto Layout function. So, I started over and tried to merge them using the Interactive Layout function. The screen comes up to allow me to move the photos around and line them up, after which I hit "OK" to merge them together. The process appears to start working, with a pop-up box coming up telling me that PSE is erasing holes and transforming, and I can see the different pics being aligned correctly in the different layers for the photo. Once all of the layers are layed out correctly, PSE says it is blending selected layers based on content, and the status bar gets to around 50% done, then the merge just stops. No error message, no more layers...nothing. Is there a timeout that's happening, causing the "blending selected layers..." action to just stop? It's running for around a minute or so before it stops.
Any help would be greatly appreciated, as I've tried to do complete this merge close to ten times now, with no luck. Thanks for your help.

Photomerge PS5 was not working on my laptop but OK on on my desktop
So I found a fix by comparing Photoshop preferences:
> Edit > Preferences > Units & Rulers
Change Rulers to cm (or maybe inches or something elese, but NOT percent)
> OK, restart PhotoShop
And miraculously, Photomerge worked again!
This bug is probably noy fixed in PS6, so this may well be your problem...

PROBLEM WITH PHOTOMERGE PANORAMA IN PSE 12

Similar Messages

Maybe you are looking for