Problem with photos in iWeb

When I import a photo into my iWeb page, it does not scroll with the text, it stays at the same place on the page. Every time I add more text, I have to move the photos. When I select the text it does not select the photo as well. When I upload the page, the photo is not always in exactly the same place as in iWeb, usually a couple of lines different. I've googled the problem and searched the forum but can't find an answer.

Welcome to the Apple Discussions. Select the photo and type Command+X to copy/delete it. Next, put your cursor in the text box, make sure you have the text cursor showing as if you were about to insert text,
and paste the photo. Then go to the Inspector/Text/Wrap pane and select the type of text wrap you want.
The photo will now scroll with the text as you add new text.
This demo page has some examples: Photos and Shapes in Text Box with Wraparound
OT

Similar Messages

Problems with Photos and Fonts and Explorer

I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

Hi everyone...
I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
For information the video is in SD PAL & captured using Blackmagic Decklink card.
Please help,...Thanks.

Welcome to the discussions...
I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
post back,
Patrick

Problem with Photo Booth backdrops

In addition to the problem of the first page effects constantly cycling, I now discovered a serious problem when trying to use backdrops. After I select the backdrop I want to use, it will appear in the main window, but it will not place my picture in the backdrop. In addition, it will merely flash the "please step out of the frame" message for a split second and then immediately say "backdrop detected." When I then snap the photo, all I get is the backdrop. I have deleted the .plist file, but that did not help. I had previously uninstalled and reinstalled the application, but the problem persists. Has anyone else experienced this problem, and, if so, have you found a solution?

I thought this issue had died and passed into oblivion. Either no one has an answer, or no one gives a ****,or both. Certainly not Apple. I seem to remember sending feedback to Apple long ago, but I never received a response. I just went to the feedback page and there isn't even a Photo Booth app. showing through which to submit feedback. Checking some of the other threads on this issue, it appears that this problem with Photo Booth has existed for quite some time, and there was a problem with placing iChat backdrops too. It seems that this app. is such a piece of crap that Apple will no longer support it. I can't understand why they continue to include it as part of the OS.
For what it is worth: I was recently at the Apple store and out of curiosity tried the app. on a MacBook Air. It (the app.) was so unstable that I didn't even bother to try to set a backdrop. I've lived without Photo Booth until now, so I guess I can continue to exist without it.
By the way: I didn't insert the asterisks. I typed d a m n, and the system inserted the ****. Interesting.

Problems with text in iWeb publishing much larger, or smaller than in iWeb (it is insane)!

More than a year ago I had a problem with my iWeb not publishing correctly: links to other websites would not open in a separate window as designed in iWeb. I got help from an AppleCare techie and after he did a lot of tests, he concluded I had a corrupted Domain file (which became apparent after I upgraded to OS Snow Leopard). I don't remember if I discussed with this techie another problem I had been having for as long as I had used iWeb, and that was "exploding" text: certain words, often italicized, would be huge, after publishing, relative to the surrounding text. Sometimes certain words, or sentences would be smaller than designed in iWeb. Through trial and error I would sort of solve these problems by enlarging text boxes, or making the offending word or phrase one text point smaller. Sometimes deleting the text box entirely, and starting over would work. And then there are the weird things that happen when my wife opens my website in Internet Explorer: things that make no sense and seem to be totally out of my control.
So, I've spent a long time rebuilding my website in this supposedly uncorrupted Domain file, and today I finally finished and published to my hard drive, checked it out, and the "exploding" text is there with a vengeance. So much so that I may just stick with my original ("corrupted") Domain file, the text problem on this new one seems even worse than the old one. Anyone had this problem? I meant to ask this question years ago, but got a bit lazy.
Another question is: I've heard Apple is going to discontinue iWeb. Despite my problems with the program, I rely on it. What are the options going to be for iWeb users?

Well you heard wrong didn't you!
Apple is discontinuing MobileMe, which is the hosting in favour of iCloud services which will not contain any hosting.
iWeb is an app and as far as we know you can still continue to use it - it will still work so carry on using it if you are happy with it.
If you want to look at other alternatives to iWeb, then others suggest RapidWeaver and Sandvox as being closer to iWeb - both are available via the Mac App store.
Also Freeway Express and Flux 3 are worth looking at - more design freedom and you are not restricted to templates as with RapidWeaver.

Problem with photos on dvd output

Not sure where the kink is in my process, exactly, but maybe someone will have run into this before...
i'm working with hi-res photos in my FCP sequences mixed with HDV video. I've been using the motion tab to resize and everything looks fine in final cut. When i use compressor to output the m2v file using the standard dvd presets, some of the stills have problems on the resulting file. not all of them look bad and it doesn't seem to be discriminating based on resolution of the original image file. I'm sure there's a good explanation, but the photos that get messed up seem to be random. some look great.
In the .m2v file played directly off of QT, they sort of just look darker, like perhaps they are interlaced strangely or something and the even or odd rows are black. but when i use that file to burn a dvd in dvd studio pro, the resulting image looks crazy messed up. Anyone know how to wrangle this one? Thanks

In case someone else runs into this problem, i did some extensive chatting with a final cut guru guy and all we could figure out is that i'm experiencing some sort of bug. that it shouldn't have been doing what it was doing. It started happening after my boss upgraded all of the studio software and quicktime to the latest versions. upon closer inspection, what was happening is that some of my photos were missing fields when exported as a qt, some weird byproduct of interlacing. we tried the settings all sorts of different ways and the problem did, indeed, go away when i changed the sequence to progressive, but i didn't want to sacrifice resolution of the rest of the footage just because of the problem with the few photos that were janky, so i found two workarounds that fixed the problem...
1) using the de-interlace effect on just the photos that were giving me problems. it lowered the resolution, but not enough to make a difference and it looked good.
2) using the motion blur effect. This filled in the missing fields and i did it at such an unnoticeable setting that it might have even looked better than the pictures i de-interlaced.
If this jogs someone's brain as to what the actual problem was in the first place and you think it's not just a bug in the system, then i'd be interested to hear how to avoid the problem in the future.

Problem with photos' colors

Hi,
I have a problem with colors of photos which I'm using in a. InDesign document.
I've created a 20 page catalog, with first and last pages for the front and back of the cover. I placed one photo on the first page and second on the last page. When I opened them earlier on in Photoshop they were matching perfectly, so I figured that it will be the same in InDesign. When I placed them in Indesign it turned out that the photo on the first page has a different color saturation (lower) than the one on the last page. It looks as if the first page was converted to CMYK and the last page was still in RGB mode (the photos were initially in RGB).
I decided to change the color preferences of the photos in photoshop to CMYK and saved thm again for InDesign, but it didn't help (I also checked all of the doc and color preferences in InDesign and all looked fine). It seems that colors are different on the last page only. Is it possible that it has a different color preferences set up? I'm a new InDesign user and I would be gratefull for You help :-)

It sounds like you have transparency of some sort (effects, drop shadow, tranparent image?) on the front and not on the back, and that the transparency blend space is set to CMYK instead of RGB while your image is RGB.
Edit > Transparency Blend Space > Document RGB

Problem with Photos in Camera Roll after 4.0.1

Hello,
I have a 16GB iPhone 3G.
I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues.
When I updated to 4.0.1, everything seems a touch better performance wise, but I found a problem with my camera roll.
First, when I opened the Photos App, there was no thumbnail for Camera Roll (all others were ok).
I opened the camera roll, and the last 50 or so pics that I had taken, were all showing as one big Black blob (not individual black thumbnails, they were all joined)
If I scrolled up to older pictures, the older ones were fine.
I took a new picture to test it, and that one looks fine.
So now I can see all my OLD pictures, and any NEW pictures I take, but those same 50 pictures were still showing as one big BLACK blob.
I can still access the pictures if I touch them, and I can flip through them without any problems. I can also copy these photos from my phone to my PC, so the pictures themselves seem to be fine.
And after copying them to my PC, what I noticed by examining the timestamps, was that the problematic pictures were all taken after I updated to iOS 4.0. It seems that all pictures from 3.1.3 or earlier are showing fine, and now all pictures taken with 4.0.1 are showing fine as well. So only pictures taken with 4.0 seem to be affected.
Is there anything I can do to fix this?
(Just for the record, my phone is not and has never been jailbroken.)

There is a solution!!
After installing iOS4.0.1 update on my 3G, I too had the black
blob in my camera roll. As posted in an earlier thread, here's
one way to resolve this problem. It worked for me!
Just email the photos that don't appear in the camera roll to myself,
delete the offending photos and then re-save them from the email.
A bit of a pain but it's a way around it. Good luck!
ErikV

Adobe Bridge CC -- ongoing problems with Photo Downloader (scrolling, crashing, etc)

Hello Community,
Thanks in advance for any suggestions to improve my Bridge CC experience! I have recurring problems, esp. when using the Photo Downloader (in other words, daily problems) -- scrolling either up or down to select photos is a nightmare, as the scrolling either jumps or stops without rhyme or reason, making the photo selection process tedious and maddening. Additionally, if I spend more than a few minutes selecting which photos to load to my computer (i.e., from iPhone), Bridge crashes.
I have been using Bridge for about a decade, and never EVER had a single problem with it until CC. I have a 2013 MacBook Pro, all software updated, etc. No fancy bells or whistles, no peripherals, etc... Just trying to get my pictures from phone and tablet to the computer.
Many thanks.

Moving discussion to Bridge forum.

Problem with Photo Booth (NOT CRASHING)

So I updated to 10.6.2 which THANKFULLY solved the Photo Booth crashing problem... However, some effects are producing an inverted color image
Here is it what I mean:
How it's supposed to look (captured by screen shot): http://img148.imagevenue.com/img.php?image=63601Screen_shot_2009-11-12_at_4.55_122576lo.jpg
How it is being saved: http://img127.imagevenue.com/img.php?image=63605Photo_on_2009-11-12_at_16_122409lo.jpg
Any help would be GREATLY appreciated

I don't know the correct place to post this issue, but I do know that I have the same issue on my iMac with Snow Leopard. I actually have a problem with the effects page that has the cube, the clown, the cowboy, etc. All these effects save the photo wrong. The colors are off and grainy.

A Problem with Comments on iWeb

I am having a problem with the comments feature in iWeb. Something has happened where people can no longer add comments to my blog or other sites. Every time they try they see this, "We're sorry. We are having problems processing your request." Does anyone have any insight on how to solve the problem? Thanks,
Kyle

You join many others in discovering a problem with the mobile.me conversion. You are probably doing nothing wrong. The "publish" button at the bottom of the iweb application is not working correctly. It is publishing to web.mac.com even though it says otherwise. When this happens the comments function in the blogs will no longer work. Solution: Do not use the "publish" button at the bottom of the iweb application. Instead, go to the very top of your screen, select "File", then publish to mobile.me or Publish all to mobile. me. I think you will find that the comments function now works.
This solution will NOT work for many of us who have lots of users that have previously been given a web.mac.com URL. There are only two options: 1. Give your users the new URL; or, put a note at the top of the web.mac.com blog that tells people it is "read only" and that comments won't work, then use a link to redirect them to a mirror image of the site with a web.me URL.. It's a pain, I know. Apple needs to fix it but the company seems to be taking a long time to do it. Must be bigger problems on their plate.
Bob

Message "problem with photo with the filename '(null).

I get the following message "There is a problem with the photo with the filename '(Null).' The full resolution version of this photo either cannot be located or is corrupt. Please replace the photo or delete it from your book." This message appears after place the order and it starts to submit the pages of the book. I get as far as page 9 of 60. I have open the pictures using photoshop and have renamed them and saved them as a tif format. Any suggestions?

annefromtallahassee wrote:
I get the following message "There is a problem with the photo with the filename '(Null).' The full resolution version of this photo either cannot be located or is corrupt. Please replace the photo or delete it from your book." This message appears after place the order and it starts to submit the pages of the book. I get as far as page 9 of 60. I have open the pictures using photoshop and have renamed them and saved them as a tif format. Any suggestions?
I believe that you have gone into the iPhoto library and made changes using photoshop - is that correct
If so then you have trashed your iPhoto library and must put it back exactly as it was - loading a backup is the easiest (probably the only) way
NEVER make any changes to the content or structure of the iPhoto library using the finder or any program that is not fully iPhoto aware
LN

Having problem with photos getting switched

I'm using Pages to create a monthly newsletter. I sent out the rough draft for proofing and people are telling me that some of the photos are wrong. They are correct in my copy. What is happening?

I cannot be absolutely certain of anything. I am new to using iWorks and this photo mix up is the major problem I've had so far. I'm sending the newsletter to board members and staff to proof for content. We want the newsletter to be correct before we send it out to donors.
I am copying/transfering the correct photos from iPhoto into the document I am creating. Somehow the photos are getting mixed up before getting to the people I am sending the document to.
I used the "share" feature in the toolbar of Pages. Some people can open it and some cannot. Last month, even though I had inserted the correct photos in the correct place, people said I had two of the same photo instead of two different photos. My copy showed the correct photos. I had to send the document in PDF by email to some people.
This month someone suggested I use We Transfer. I have to send the document in PDF form because most people can't open it in .page. Some people like it, some don't, but the problem with the mixed up photos on the receiving end continues.
Thanks for any ideas you may have or help you can provide.

Problem with photo pixilation

I've just switched to using firefox instead of internet explorer.
Now on my Twitter and Facebook pages the photo pixilation is off resulting in bright green texturing in shadowed areas. Not sure what to do about it?

That can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.<br />
You can disable color management to test that.<br />
You can set the pref gfx.color_management.mode to 0 on the about:config page to disable Color Management.<br />
You need to close and restart Firefox to make the change effective.<br />
See:
* http://kb.mozillazine.org/gfx.color_management.mode

Problem with photos in iWeb

Similar Messages

Maybe you are looking for