Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Similar Messages

Photoshop cs6 won't open a pic in camera raw

I open photoshop cs6 and go to open. Select the file and then select camera raw and click open but it still opens in Photoshop. I close the file the go to open again but now every file are in light grey meaning I can't select the file to open it. So I have to close photoshop and re-open it and the same problems are happening again. Yesterday everything was totally fine, I changed nothing. I tried doing all the updates on the adobe software but still the same problems. So, I can't open camera raw, and can only open 1 file on Cs6.
If anyone had, know or had read something on that particular problem please let me know. It's very annoying and can't work with it anymore.
Thank you for your time.

On a Mac I don't know which directory it should be in.
Camera Raw preferences: Bridge: menu Adobe Bridge/ Camera Raw preferences.
Inhere you can set the wished behavior for tiff. By default it shows tiffs
only in ACR when you choose to do so with right mouse click menu (open in
Camera Raw) or if the Tiff had earlier been altered in ACR, then it opens
automatically in ACR unless you choose not to do so.
About Plug in in Photoshop, Menu Photoshop/ about Plug In

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

When Place Image in Photoshop, error msg: 'Problem with Photoshop CS6 caused program to stop working

When I 'Place Image' in Photoshop, the following error msg comes up: 'A Problem with Photoshop CS6 has caused the program to stop working, close programme?'
Do I need to adjust my set-up to run this? The PC operates on a 32-bit system/Windows 6.

You need to provide much more info: What files are you trying to place into what document? What are the document sizes, resolution, color mode etc.? Anything else we should know about? This could be a million things from color profile issues to color space mismatches to the files to be placed being damaged or badly structured or a importer module being broken. Also provide exact system info and crash logs:
Working with your Operating System’s Tools
Mylenium

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Can photoshop open .jpg file in camera raw?

Can photoshop open .jpg file in camera raw?

Hi,
Yes.
Here's a post going over how to go about it:
http://www.photoshop.com/tutorials/7312
regards,
steve

Photoshop on start or opening a photo in camera raw puts computer in Restart mode.

When I start my computer and try to open Photoshop or open a photo in camera raw the computer some of the time will go into restart mode and again and again. I have removed all of Photoshop CC2014 and reloaded from adobe and have the same problem. Any ideas as to what might be happening?

Quite likely the problem is not Photoshop as an application like that should not be able to crash/restart your OS.
Please read these (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Can't Open .NEF Files In Camera Raw CS3 - Windows 7

I have a Nikon D60, Windows 7 Professional (32bit) and Web Premium CS3.
I recently upgraded from XP to Windows 7.
I cannot get my Nikon's .NEF (Camera Raw) files to open when I select "Open in Camera Raw". I can see the .NEF thumbnails, but neither Photoshop or Bridge will open the files in Raw, you know where you can adjust all those killer settings non destructively.
I had cs3 installed on an XP machine and my .NEF files worked perfectly in Raw. Not so in Windows 7. I have tried to update to Camera Raw 5.6 but that wouldn't install. Is there an earlier version of CR that I can get and use, or any other advice would help.
Thanks

The last version of Camera Raw to work in Photoshop CS3 is version 4.6. If you HAD been able to open your D60 NEF files and now can not, then something changed...did you do a fresh install of CS3 under Win 7? If so you installed version 4.0 (what shipped with CS3). You'll need to go to the Camera Raw Updates for Windows and download an install version 4.6.

Why can I no longer open jpeg files in camera raw in CS2? The option is grayed out in Bridge

I was forced to download CS2 from the web after Adobe stopped allowing me to register it from my disks and now I can no longer open files in camera raw. Am I missing something?

As far as i know, photoshop cs2 and adobe bridge 1 (cs2) could not open jpegs or tiffs into camera raw, only camera raw files.
I believe photoshop cs3 was the first version to allow jpegs to be opened in camera raw.
Are you sure you had photoshop cs2 before?
If on the other hand, you can't open camera raw files that you used to be able to open, then you probably just need to update the camera raw plugin to version 3.7
windows
Adobe - Photoshop : For Windows : Camera Raw 3.7 update
mac
Adobe - Photoshop : For Macintosh : Camera Raw 3.7 update

Bridge (2.1.1.9) in CS3 10.0.1 won't open psd file in Camera Raw

Why is File/"Open In Camera Raw" greyed out when I try to open a psd file in Bridge? It will open a jpeg file in Camera Raw. Thanks

As far as I know it is not an option to open PSDs in ACR.
It has to be JPEG or TIFF. (Or raw of course!)

Problem with Photoshop CS6

I recently uninstalled Adobe CS5 Premium Suite and I am currently using Adobe CS6 Premium Suite (both were on my iMac). Since uninstalling CS5, I now get a message when opening Photoshop CS6 that says "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop." I don't seem to have my original CS6 .dmg installation file. Can I download it from Adobe (just Photoshop)? I do have my original serial number saved.

The problem with that scenario is you have a suite serial number and you can't use it on a standalone Photoshop installer.
You can get the dmg for your particular suite here:
Download CS6 products
There may be a Custom or Repair option that the suite Installer might give you.
Gene

Problems with Photoshop cs6 tools

I just got Photoshop cs6, and I am probably at intermediate level in expertise. When I try to use the marquee tool, the lasso tool or the quick selection tool on an image, the image just goes black. I have to click back to "Open" on the History the get the actual image back. I have Windows 7 64 bit. I have never had this problem with other versions of Photoshop.

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Problem with Photoshop CS6 Freezing up when saving OSX Mavericks 10.9

I have a iMac we purchased last year (27inch, 32GB Ram, 512GB Flash Storage, OSX 10.9 Mavericks) with Adobe CS6 installed on it. About 2 months ago our Graphic Designer started having problems where when she went to save a Photoshop file the Mac would freeze up and just show the spinning pinwheel, after this happens we are unable to to even shut the system down and have to resort to holding the power button until it shuts off. Now this doesn't happen every time and we went almost a month with a problem but it has started back up and is happening multiple times a day. We have tried re installing CS6, creating a new profile for the user, deleting the library folder, saving to the desktop instead of a network location but nothing has seemed to do the trick. I'm a Windows Sysadmin so I'm out of my depths here and my poor Graphics Designer is getting really upset. Has anyone out there every had something like this happen??
Forever Grateful for any help that could be given -Giles Marsha

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Problem with Photoshop CS6. If I open a file using Camera RAW

Similar Messages

Maybe you are looking for