Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution
can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size
Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium
Similar Messages
-
I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.
Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear
You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.
-
I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?
You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Problem with national characters on windows client
Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz -
Problem with the audio editor window into logic pro X
hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day! -
I can't start Facetime. Keep getting a pop-up window saying that "an internal FaceTime error occured. There was a problem with FaceTime.
You need to quit and open FaceTime again". I keep retrying to open and keep getting the same message over again.@ reichard
yeh man i have the same problem i think when i open the ****** facetime it dosent open there is a line in facetime icon it dosent open i dont know how it work **** i want it to work hope someone help me thx -
Has anyone else had problems with their RAW editing window?
I'm having real problems with my RAW editing window (the one that automaticaly pops up when you open a raw file). I've opened several images, but when I click on the different thumbnails on the left hand side the large preview image in the center doesn't change. Obviously I need to be able to see this to make the required changes.
Any ideas/help you be greatly appreciated!!!Hi Kate,
I haven't yet been able to replicate your problem. Will you please describe your workflow? Are you simply selecting multiple files from your computer and double clicking to automatically open in Camera RAW?
Also curious, with all of your images open in the RAW editing window, what happens when you use the arrows near the bottom right? Does your image change?
Cheers,
Michael -
Problems with a VBA Userform using Multipage (2) and DTPicker.
Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
CimjetThere are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com -
Bluetooth problem in ideapad s210 touch windows 8.1 and audio problem
Hi .. i have lenovo s 210
i have a problem with audio output, the sound is muted and it said that my bluetooth audio device can not be started. i download realtek High definition from the support system and the audio system start working again. But when i check the device manager the bluetooth problem still not fixed. It said i had a code 10 problem. I just recently update my windows to 8.1, but before there is no problem with the audio... and recently i find out that i can not use my bluetooth too. and all the bluetooth system seems doesn't work out
what should i do??
thanksActually, I solved this issue myself after a while.
I induced a system restore prior to the date when I began to experience this error.
It then happened once more, so I went to the "PC Settings" menu and selected "Update and recovery".
There were apparently updates to be installed, so I clicked "More details/information", and found that there were 3 Intel-related drivers that were listed, but for some reason, Windows 8 didn't automatically install them, so I checked each one of them and proceeded to install them and it has been smooth sailing for me ever since that.
SO.
A piece of advice for all those who have experienced the issue I detailed in my former post:
Check what updates need to be installed on your computer in the "PC Settings" app thing, and see if there are any driver-realted updates (like for your graphics card, especially). -
Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanksI've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine. -
Right-click with 2 fingers on Windows Vista taskbar and nothing appears
I just updated my Bootcamp to 2.1, I thought it would solve my problem
"Right-click with 2 fingers on Windows Vista taskbar and nothing appears" but I still have this problem, I cannot right-click on my windows vista at all.
though, right-click on the notification area works.
right-click = pressing the trackpad with 2 fingers.Now I have figured out I have to use 3 fingers instead of 2 fingers.
but in the BootCamp Control Panel there is an option that says
* Use 2 fingers for right-click -
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. -
Over the course of many years I seem through using different computers to have several apple ids and three email addresses, this is causing problems with synchronising, I have an iPod, iPhone and ipad
Hi there
Sorry for hijacking your thread as put by Dahveed. However I have resolved my issue so I thought I'll share it with the rest of you.
I checked for the error 3194 in youtube and I found some good videos that tell you how to resolve the problem. The issue I was facing was the actually (I know because I have resolved it now) the communication between my computer and apple server which can be fixed as following (if you are using windows):
There is file in following directory:
C:\Windows/system32/drivers/etc/hosts
The file normally has no extension and it is in file format. You need to open it and make sure that every line that has apple server id starts with "#". In my case one of the line started directly with the ip address and then gs.apple.com.
Perform your restore/update after that and hopefully it should be resolved (mine did).
Cheers -
Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev KumarDuplicate thread:
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
After starting a new account. How do I get my old music back from the first account?
After starting a new account because I was unable to get my old id and password, I would like to know how to get my music back from the first account?
-
Text is arbitrarily appearing as dingbats font.
Some, but not all, text on some web pages is arbitrarily appearing as a dingbats font.
-
Problem about Indexes missing in the database
Dear all, We found a missing index in DB02 view of our sap system. This missing index is a Secondary index, and its name is S509-VAB. We tried to create it in DB, but got below error log as below: Index S509~VAB could not be set up in the database Me
-
Hi Everyone, does anyone know/encountered the following issue? While using 'Create Group' activity from AD integration Pack, and creating LST group. By that I get as an outcome - group with default permissions(for LST<<List Access>> - to this folder
-
How do I correct the arrow keys to change from lower case to higher case
The arrow , shift key, will not allow me to change from upper to lower case letters when in I Tunes. the arrow keys seem to work in every other application. I cannot properly enter a password to enter I Tunes. I reset the password from my no