Problem with Places in Aperture

Using OS X 10.9.2 and Aperture 3.5.1. When choosing a project in Aperture and click on places a map appears but no photos in the bottom browser. Just a blank strip of nothing. I deleted and reinstalled Aperture, but no luck.

Is the search field in the Browser cleared? If not, clear it. You should be seeing "Show All"

Similar Messages

Problem with permissions in Aperture 2.4.1. after installing mountain lion, did repair permissions but it stop at 3/4 of the repair cycle? Does anyone know what to do, my library is 94gigs!

I tried all solutions to get my library permissions corrected, but nothing worked. Is this a known problem with ugrading to mountain lion for Aperture 2.4.1.? Does anyone have a new solution to get my library working again?
Thanks for any help.
Otto Muskee
Germany

I tried all solutions to get my library permissions corrected, but nothing worked. Is this a known problem with ugrading to mountain lion for Aperture 2.4.1.? Does anyone have a new solution to get my library working again?
Thanks for any help.
Otto Muskee
Germany

Problem with places, the map is disappear

HI everyone,
I notice today a problem with iphoto 9 (ver 8.1.2), if i go to places the map on the right is disappear, i have geotagged some photos but nothing, so I have no map inside spaces, any guess?
Thank you
Michele

in the iPhoto preferences is look up places set to automatically?
When you click on the little "i" in the lower right hand corner of any of these photos does it flip over and show the location?
LN

Problem with iPhoto or Aperture when I want to export a large slideshow

Hello,
I have a big problem when I want to export a large slideshow is created with iPhoto or Aperture. After ten minutes, my iMac off and then restart. I tried several times but the problem again.
I said that this slideshow contains photos and videos.
thank you

That can be caused by many things - try to narrow down, what is happening:
Does your slideshow have a problem?
Do the media in your slideshow have a problem?
Does your Aperture library need fixing?
A problem with your user account?
Video codecs?
Aperture?
Your Mac OS X?
Your Hardware?
Check, if you can export slideshows at all from your Aperture library. Create a new, emty slideshow for experimenting and add one video, an audio clip and one or two photos. Try to export. Does that work?
If yes, duplicate your original slideshow and delete half of the photos from it. can you export now? Continue to find the video or image that does not work.
If no slideshow can be exported from your current library try to create a simple test slidesho in a different library. Does it work?
Post back with your results.
Léonie

Problems with Lightroom and Aperture

Automatical file transfer doesn't work with Lightroom. File transfer starts, but in the end error report appears and no files are transferred. File transfer works manually and via Finder.
There are also problems with Aperture. It crashes, when I try to view images in full screen mode.
Waiting for an update...

Hi Tim, I downloaded an update to Aperture and it works fine.
However I sympathize with Lightroom. I have weird problems when quitting Photoshop CS3.
Hmmmmmm

Is there a problem with the new aperture update ?

Hi,
Got the lastest update for aperture and just opened up some recent photos in aperture and it looked like missing pixels in the picture. Some of the pictures, distortion of pixels was terrible. At first I thought my new Macbook pro screen was faulty. It was the third time today that I was looking at the same pictures and I knew there was no problem with the file and then I remembered the aperture update. I opened the same pictures with iphoto and then set the photos as desktop pictures and they came out perfect.
Has anyone else had the same problems after the update ?
Thanks.

Hi, welcome to the forum
Sometimes these issues are user related, but not always.. I agree with Allan that you need to let Aperture finish its tasks.
Here is a link to an article that you can work through to see if you can resolve your specific problem....... http://support.apple.com/kb/HT3805
This will step you through some issues and hopefully help you resolve your problem.
Regards....... Gerry..

CreateTextField and _height: Problem with Placement of Text Fields

I'm using createTextField to create several text fields
dynamically. I'm also using an external XML file and a style sheet
to populate the text fields.
My problem is that I'm trying to position the various text
fields on the page so that they are spaced evenly on the page
(regardless of how much content they might contain). I'm trying to
use _height of the prior text fields to place subsequent text
fields, but I'm getting very inconsistent results. When I trace the
value of _height, I get differing results, even if I don't actually
change any of the parameters. So, the question is...is there a way
for Flash to get the height of a dynamically created text field
that's populated via an exteral XML file and using CSS? I know
that's asking a lot, but I'm trying to avoid using scroll bars if
at all possible.
Thanks for any pointers.
Bill

i assume you're using multiline textifields with a fixed
width and autoSize="left".
flash will report the correct _height of your textfields IF
you access the _height property after your htmlText has been
assigned to your textfield. ie, you're probably seeing inconsistant
results because you're not waiting until all data needed to
populate your textfield has loaded.

Problem with Placements rendering multiple times

I am having a problem of portlets rendering more than once. Or more specifically,
it appears placements are rendering more than once. Anyone have this problem.
It seems to show its ugly head switching between VIEW and EDIT mode in portlets
with Backing files. Here is the only output I get.
<Mar 8, 2004 5:10:39 PM EST> <Warning> <netuix> <BEA-421534> <Expecting one placement
got at least one more: username MYLOGIN placement
Placement:
placementId: 26004
DesktopInstanceId: 22003
PageInstanceId: 6004
PlaceholderDefinitionId: 6010
position: 1
PortletInstanceId: 36007
BookInstanceId: null location 1.>
cheers
andrew

Hi Andrew,
I am getting this kind of problem while using PortalVisitorManager::movePlaceableInstances()
in my JPF code.
It seems that one call resutls in adding a single portlet many times (8 times).
The confusing part is that it should move a portlet instance from one location
to other location but it adds new instances...
did u get around with u'r problem, do u have some solution..
any clue.....
regards,
Jitendra Kumar.
"Andrew Clifford" clifforda.no.spam.comcast.net wrote:
>
I am having a problem of portlets rendering more than once. Or more specifically,
it appears placements are rendering more than once. Anyone have this
problem.
It seems to show its ugly head switching between VIEW and EDIT mode
in portlets
with Backing files. Here is the only output I get.
<Mar 8, 2004 5:10:39 PM EST> <Warning> <netuix> <BEA-421534> <Expecting
one placement
got at least one more: username MYLOGIN placement
Placement:
placementId: 26004
DesktopInstanceId: 22003
PageInstanceId: 6004
PlaceholderDefinitionId: 6010
position: 1
PortletInstanceId: 36007
BookInstanceId: null location 1.>
cheers
andrew

Problem with Place call in a script with HTTP trigger

Hi!
I'm trying to develop a sample script, associated to an application that has an HTTP trigger. I'm working with UCCX Premium 8.5.1
The trigger is working OK, but the place call output is allways "unsuccessful". The number to call and the redirect number are extensions of the same IPT platform.
Below you will find print-screen of the script. Besides, I'm attaching the .aef file.
Any help would be appreciated. Thanks in advance.
Roy.

The value in your "Call Control Group" must match the "Group ID" in your CM Telephony Call Control Group Configuration
This is from my lab system so the "AgentsLoggedIn" variable would need to contain 1 or 3. You are telling the script which CTI port group to make the call with. You have a 0 in your AgentsLoggedIn so do you have a Group ID of 0?
Your CTI group must be able to make the call so must have the correct partition/Calling Search Space
Graham

Problem with Places???

Hello,
Is there a way to " reset " Places to be empty and remove all locations.
I've tried using W_indows -> Manage My Places_ to delete the locations but a lot of photos just seem to tag themselves as being my home city (just the name) and did not appear on the list in Manage My Places.
I've tried retagging the photos with a a random address but when I then try to delete it they still appear in Places.
Regards.

You can try the following but make a backup copy of your library first:
1 - open the library package like this:
Click to view full size
if that doesn't work you can fall back on your backup copy.
OT
2 - open the "Metadata Backup" folder.
3 - move the "Places" and "GPS Tracks" folders to the Desktop.
4 - launch iPhoto and check for Places.

Problems with iPhoto and Aperture after installing Mavericks

I use iphoto 11, version 9.5 (902.7) and Aperture 3.5. both are dodgy since installing Mavericks - freezing, not allowing access while wheel spins, showing "Processing". I've re-installed both aperture and iphoto from the Apps store. No difference. Advice please.

The problem keeps occuring every time I shut down my laptop and reopen it when I am not at home (i.e. no Time capsule connected...)
What could I do to solve this issue...anyone please?

PROBLEM WITH PLACEMENT OF BOUGHT TUNES

When I buy tunes, alot of times, it will be listed in my library and not in my purchase music playlist. What's up?

slr,
Only tracks purchased from the iTunes Music Store will be placed automatically in the Purchased Music playlist. Are the tracks that are not included in this playlist purchased from elsewhere?
~n

Big problems with slideshows

Hi, I've a big problem with iPhoto (and Aperture too, but I'll say later).
Two days ago I was creating a small slideshow (18 pictures) and everything was fine. Suddenly, while I was looking for a theme, switching between 3 of them, iPhoto stopped to work. No ESC, no key, I had to restart my iMac, turning it off.
From this moment every slideshow I select, iPhoto stop to work and need a force quit. So I restored a library, from Time machine, but nothing changed.
So I bought Aperture, but nothing changed, using iPhoto Library.
Now I've created an Aperture Library, importing in it my old iPhoto Library. Is there any way to "clean" iPhoto, reinstalling it from new? Do I need such a action?
Thank you and best regards.

That means that there is something in your account that's the culprit. First try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that fails it might be another preference file that's causing the problem. Here's how to test for that:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot.
5 - run the application again and determine if the problems is fixed
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot.
OT

Serious problems with WYSIWYG

Hi,
I have some serious problems with placements in 3.0. Items sits just fine i design mode, but in quick preview or in browser preview, items goes all over the place.
The only way to go around the problem is to shift the item in design mode and make successive previews to see, if the item now sits correct. And even this metode is not optimal, because sometimes this action moves other objects on the page in preview as well....
This ofcourse means, that I do not have any WYSIVYG at all. And the worst is, that I never know which of the items on a page will course the next problem. Very, very frustrating!
My last updated version (must have been 2.3...) was faultless. I made a customer site in this version before upgrading.
This page has now been approved, but opening the site in version 3.0 is futile. In designmode everything looks fine, but in preview it looks like something I tried to code myself.... I don't know what I will tell my customer, but it's not good. Not good at all.
I have attached two screendumps. The first one shows the page in design mode. Everything looks fine and every item sits correct. On the second screendump you see the slideshow is going up and behind the topbar, which is center pinned. Notice that there is no scrollbar, so I can't scroll down. This problem is just one of the above mentioned. Other problems are text or pictures that refuses to align horizontally, pictures that goes way out to the top - or the bottom....
I tried to check the sticky footer on and off, but no result either. I have even rebuilt the version 2 site, pasting the items anew, but still it goes wrong in the browser.
Am I the only one experiencing this problem? If you want to see the muse file, you are welcome.
Regards a very unhappy customer

Hi Sachin, no, But I do have a center pinned topbar. I have tried to un-pin the topbar, but the problem with misplaced items still appears. Its important to emphasize that in designmode everything looks fine, but in preview or a browser files are misplaced or hidden behind each other.
I tried to check the sticky footer on and off, take away footers on the masterpage etc. because it seems that something on the page is pushing or attracting some of the placed items.
The problem basically is, that Muse 3.0 does not give me WYSIWYG, and that is a dissaster for a designer!
Regards
John
Sendt fra min iPad
Den 19/12/2012 kl. 07.23 skrev "Sachin Hasija" <[email protected]>:
Re: Serious problems with WYSIWYG
created by Sachin Hasija in Adobe Muse Bugs - View the full discussion
Hello,
Please confirm if you have the items Right pinned? There is a known issue with Right pinning of items and restarized items in footer and our team is working on it to get them fixed as soon as possible.
We should have a Muse update available very soon which fixes these issues and a few others.
Apologies for the inconvenience.
Regards,
Sachin
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4932472#4932472
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4932472#4932472
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4932472#4932472. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Muse Bugs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with decimal places and formatting

Hi , we are having problems with an add on running on different localization companies. Decimal places separatd by "," differ from other localizations. We dont know if this is a SQL collation setting or somethng related to code or requirements to run add ons on different servers and languages.
Any ideas??
Thanks

Hello
Follow up with this thread:
[Re: How to get the numeric value of DocTotal from UI API]
Regards,
J.

Problem with Places in Aperture

Similar Messages

Maybe you are looking for