Problem with populating exit variable

Hi,
Im reposting this thread which is already in another section.
I have a requirement as follows:
There are 2 info objects for Start& End Periods of project.
There is another Keyfigure(number of months) which is populated by calculating the difference of Start & End periods.
Now, the filtering criteria would be Start period, End period and number of months.
When the user enters the Start and End periods of the project and also the number of months, the system shoudl display all the projects matching the above filtering criteria.
Eg:
Project1: Start period : 01.2009
End period : 06.2009
Number of months : 6
Project2: Start period : 02.2009
End period : 04.2009
Number of months : 3
Project3: Start period : 03.2009
End period : 05.2009
Number of months : 3
Project4: Start period : 05.2009
End period : 07.2009
Number of months : 3
Project5: Start period : 05.2009
End period : 09.2009
Number of months : 5
Now if the user enters the following the filtering criteria:
Start period: 01.2009
End period: 12.2009
Number of Months : 3,
the system should display only project2,project3,project4.
Any thoughts on how to achieve this using an Exit variable? Because the variables Start and End periods are created on 2 seperate info objects.
Thanks
Shyam

Hi Shyam,
Check this url.....
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Hope this will suits for u'r requirement.
Regards,
Vijay.

Similar Messages

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Problem with BW exit variable on range of dates

Hi everyone:
I have a problem with exit variables in BW, the scenary is following:
I need to generate a ratio MTD (month to date, i mean, first day of the month to actual date), for this, I enter a date by keyboard, for example 31.12.2010 and BW must return the range 01.12.2010 - 31.12.2010. The problem is what BW returns: 31.12.2010 - 31.12.2010, i mean, repeats the same date entry by keyboard.
For this porpuse I have a variable of interval type called "ZCALDAY" on infoobjeto 0CALDAY, and exit variable of interval type called "ZRANGE", the code in CMOD is the following:
DATA: L_RANGE         TYPE RRS0_S_VAR_RANGE,
            L_P_RANGE   TYPE RRS0_S_VAR_RANGE,
            L_S_RANGE   TYPE RSR_S_RANGESID.
when 'ZRANGE'.
     BREAK-POINT.
     IF I_STEP = 2.
       CLEAR l_s_range.
       READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZCALDAY'.
       CONCATENATE loc_var_range-low(6) '01' INTO l_s_range-low.
       l_s_range-high = loc_var_range-low.
       l_s_range-sign    = 'I'.
       l_s_range-opt     = 'BT'.
       APPEND l_s_range TO e_t_range.
    ENDIF.
I doing Something wrong with the variables definition or on the code??
I hope you can help me....
Best regards!!!!
Cesar.

Thanks!!
I think the problem is other, I check the RSRT transaction and the range is calculated ok, i mean, the range generated is 01.12.2010..31.12.2010.
But the query does not show the data corresponding. the query shows the values of the day 31.12.2010.
The interval are not restricting the key figure...
I used the variable exit "ZRANGE" on the key figure restriction and the variable ZCALDAY in the filters section.
Maybe, the variable definition is wrong (variable ZCALDAY and exit variable ZRANGE)
Thanks!!!

Problem with User exit variable

We're using an user exit variable (var2) for YTD calculation (For getting the first month of current year). It gets value from another exit variable (var1) which has by default value last month of current year(populated in I_step1 from sy-datum). If the user wants he can change the default value of var1. It works fine when the query is executed the first time. But if the user calls the variable screen again, the variable screen does not show var1 in the popup and the user gets an error message that no value could be determined for var2. How can this issue be resolved or is there any other method to satisfy this requirement.
Your help would be appreciated and rewarded.
Thanks & Regards
Hari

Hi Ravi,
Sorry, there's a correction. var2 is used for getting the first month of the year selected by the user in var1. If the user doesn't enter a value for var1, then var2 should take first month of current year from var1 which has by default last month of current year (populated in i_step1 from sy-datum). The user can select the value of var1 according to his requirement. Then var 2 should get first month of the year selected. That's why I'm using two exit variables.
It works fine during the initial run of the query. But when the user clicks on the variable button in the toolbar and executes the query, var1 is not being displayed and an error message No value could be determined for var2 is shown. All other variables used in the query are displayed except var1.
Krzys, Is the option Can be changed in Query Navigation available for Exit variables. I'll check that and get back to you.
Boujema, Thanks for the OSS note.
Thanks
Hari

Problem with customer exit variable on date range

Hi All,
I have customer exit variable on date range. In the selection screen it has to give the week range as a default (05/21/2009 to 05/27/2009).
Earlier its working fine and from yesterday onwards it is not working properly. yesday onwards default date range was not displaying in selection screen.
Wht would be the problem.
Thanks in Advance

Hi Ashish,
I checked every thing what u told earlier. Every thing is fine.
And another thing is
I have routine in infopackage level. Since day before yesterday it was working fine and yesterday onwards it was not working.
Eg: budat will take the data based on routine for the week. But yesterday onwards it is not picking up the data.however I have the data in datasource for the week.
Wht would be the problem. I debuged the code and its working fine.
Sekhar

Problem with customer exit variable

HI i have created a customer exit variable to rread a table based in user input and pass it to my variable , every thing works fine but i get a waring message in my WAD saying
RANGE-LOW for customer exit variable ZVSO_PRM corrected to # BRAIN 746
Does any one have any idea why is it comming
my code is as follows
WHEN 'ZVSO_PRM'.
IF I_STEP = 2.
DATA: BEGIN OF ZPROD_MODEL OCCURS 0,
I_PROD LIKE ZCURR_PM_T-/BIC/ZPRODMOD,
END OF ZPROD_MODEL.
DATA: BEGIN OF ZREGIO_TABLE OCCURS 0,
REGION LIKE ZCURR_PM_T-/BIC/ZREGION,
END OF ZREGIO_TABLE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZREG02'.
CLEAR L_S_RANGE.
ZREGIO_TABLE = LOC_VAR_RANGE-LOW.
APPEND ZREGIO_TABLE.
ENDLOOP.
LOOP AT ZREGIO_TABLE.
SELECT /BIC/ZPRODMOD FROM ZCURR_PM_T INTO TABLE ZPROD_MODEL WHERE /BIC/ZREGION = ZREGIO_TABLE-REGION.
APPEND ZPROD_MODEL.
ENDLOOP.
SORT ZPROD_MODEL.
CLEAR L_S_RANGE.
LOOP AT ZPROD_MODEL.
L_S_RANGE-LOW = ZPROD_MODEL-I_PROD.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Numeric value variable problem with user exit

Dear experts,
I've created a variable (numeric value, user exit) and I want to get the value of variable from an user exit.
Actually, I want to convert "0calyear" to a number to be albe to calculate (multiplying, dividing etc).
If there is a possible solution only in FOX, the solution will be the best. However I couldn't find anything.
So, the next solution I am trying is user-exit. But I am in stuck here.
The problem is that I have no idea whether the numeric value variable has any sturcture like other variables(char. value) or not. If yes, what structure it has?
I know, the characterisc value variables have the structure as blow,
 ls_varsel-chanm =
 ls_varsel-seqno =
 ls_varsel-sign =
 ls_varsel-opt =
 ls_varsel-low =
I've tried several times with the same way like above, but it doesn't work when I call the variable in "BPS0" or "UPSPL".
How can I solve it? Please let me know.
I am using SEM_BW 4.00.
Many Thanks.
Bruce

Hi Ravi,
Sorry, there's a correction. var2 is used for getting the first month of the year selected by the user in var1. If the user doesn't enter a value for var1, then var2 should take first month of current year from var1 which has by default last month of current year (populated in i_step1 from sy-datum). The user can select the value of var1 according to his requirement. Then var 2 should get first month of the year selected. That's why I'm using two exit variables.
It works fine during the initial run of the query. But when the user clicks on the variable button in the toolbar and executes the query, var1 is not being displayed and an error message No value could be determined for var2 is shown. All other variables used in the query are displayed except var1.
Krzys, Is the option Can be changed in Query Navigation available for Exit variables. I'll check that and get back to you.
Boujema, Thanks for the OSS note.
Thanks
Hari

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

Text Variable replace with Customer Exit Variable

Dear Experts,
I created a text variable based on replacementh path (instead of customer exit). The reference characteristic is same that as my customer exit Variable and replace it by Key.
I want to replace it with already Existing Customer Exit Variable but it is not displaying in the List Box even though existing variable option is mandatory.
Can any one Suggest me the answer for this.
Regards
Supraja.K

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Critical problem with customer exit scenario

Hi Gurus,
I have some critical prblm in designing the report.
we have one field say VOtype which holds numeric values..
and another column parameter whihc holds whihc type & corresponding values..
VOtype
1400   parameterA 1
1400   parameterA 2
1400   parameterB 3
1510   parameterA 3
1501   parameterA 3
1521   parameterB 4
now when user enters some variable X - value.. say X=3
the report should calulate total conisidering first 3 digits of VOtype so we hav four combination 140, 151, 150, 152
the report should see lik this
                                TotalA     TotalB
1400   parameterA 1
1400   parameterA 1
1400   parameterB 3
                                   2          3
1510   parameterA 3
                                   3          0
1501   parameterA 3
                                   3          0
1521   parameterB 4
                                   0          4
when user enters X=2
the report should calulate total conisidering first 2 digits of VOtype
so we hav only two combination 14, 15
the report should see lik this
                                     TotalA     TotalB
1400   parameterA 1
1400   parameterA 1
1400   parameterB 3
                                       2          3
1510   parameterA 3
1501   parameterA 3
1521   parameterB 4
                                       6          4
can you help me in handling this situation?..
whether i hav to go for customer exit?..
how can I represent the data in report as above.. like all the detailed lines & also total disply in report?..
points will be awarded ..for every solution..
Regards,
Naveen

Hi ,
U have to create a customer exit variable for the value type by assigning the value of each document type = required count
this is the solution for ur problem
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan

Authorization with customer exit variable (CP, BT, EQ)

Hi SDN-Experts,
I have a question concerning the new authorization concept.
I created an authorization for 0COSTCENTER which also contains the 3 special characters 0TCAACTVT, 0TCAIPROV and 0TCAVALID. I inserted a customer exit variable for 0COSTCENTER. The exit reads datasets from a db table which contains authorizations for the actual user. The authorizations have different formats, e.g. "1000", "1000;1200", "25*" etc.
The internal table e_t_range is filled as followed in the exit:
i   eq   1000
i   bt   1000   1200
i   cp   25*
This does not work. It works if I only use "eq" OR "cp". But not both at the same time.
How can I achieve to use the different authorizations in the db table for the bi authorization?
Thanks in advance...
Joerg

Hi Olivier.
Yes, the variable is defined as selection option and I did also try to use "EQ" instead of "CP".
I tested again with another variable which is "ready for input" and is not used in an authorization. The Variable is filled in the customer exit. This is the code:
WHEN 'ZJGR_COSTCTR_TEST'.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = '0000001000'.
l_s_range-high = '0000001200'.
APPEND l_s_range TO e_t_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'CP'.
l_s_range-low = '0000002*'.
APPEND l_s_range TO e_t_range.
The result in the variable screen in BEx Analyzer is the following:
1000 - 1200;0000002*;
And it still does not work. It seems that you could not mix EQ, BT and CP. But this is exactly what I have to do with the authorization variable...
Do you have any other tipps that I might try out?
Thanks,
Joerg

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Problem with populating ROWSET

Hi ,
I have a problem with ROWSET.
I have a table with 6 columns and approximately more than 200 records.
I reterive them in a ResultSet and resultset gets populated.
But I populate Rowset with that ResultSet then it hangs for atleast 1 minuate and then it comes back to its original state.
Can anyone have thge idea why it happens....?
Is therer any issue with the Rowset ?
Why it takes too much time to populate the rowset..?
Thanks
Tariq

Here it is....
CachedRowSetImpl crs = new CachedRowSetImpl();
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet result = stmt.executeQuery(sql); // Here we have 250 records in ResultSet
crs.populate(result); // This is the problem. This line takes atleast 1min to executeAny solution u gurus have ....

Comma problem with global string variable

Hi,
I'm fiighting with comma problem for global string variable. I've on page string for example "7nndqrr52vzyb,0" and by dynamic column link I'm assigning this string to global variable. Then I'm trying to display value of that global variable on another page but I see only string till comma, nothings more. I'm not sure what I'm doing wrong because when I'm trying to assign that value normally by computation process as a constant value is fine and see on another page correct string. I'll be really glad for help.
Thanks
Cheers,
Mariusz

When it tries to display the string, it sees the comma and wants to believe the string is terminated. You could escape the , in the string or replace it with a different character..
See this link: http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/concept.htm#BEIGDEHF
Thank you,
Tony Miller
Webster, TX
If vegetable oil is made of vegetables, what is baby oil made of?
If this question is answered, please mark the thread as closed and assign points where earned..

Problem with populating exit variable

Similar Messages

Maybe you are looking for