Problem with Power Adapter. Please Help!

So, I recently noticed that when I try to use my laptop while it's charging up from a low battery it will randomly STOP charging. The annoying phenomenon usually occurs when I play video or surf online as the computer recharges from a low percentage (5%-50%). Now, I should be able to use my computer while it's charging, right?? Also, I discovered that the power adapter gets hot and makes a humming sound that grows louder right before it shuts off. The odd thing is, is that the laptop will charge just fine if I leave it alone. Weird!
I wouldn't be all worked up about this, but here is what has happened so far:
I have taken the laptop and power adapter to Apple several times and explained that the orange LED light shuts off and that I have to plug the adapter back into the wall to get it to come back on.
So far, the people at Apple have:
1) replaced the first power adapter (that did not work, so I went back)
2) gave me another power adapter (that also did not fix the problem)
3) actually replaced the battery (also did not solve this problem)
I don't know what to do because I don't want to look petty over a stupid problem. However, I have the warranty and this problem is becoming VERY annoying.
Any ideas or similar situations?
Thanks,
Aaron

Hi. Have you tried resetting the SMC: http://support.apple.com/kb/ht3964
And calibrating the battery: http://docs.info.apple.com/article.html?path=Mac/10.6/en/9036.html
Bob

Similar Messages

Weirdest problem with ipod!PLEASE HELP ME!!!

Okay, i tried to load a playlist that had about 100 songs on it. While its loading, the update just stops. My ipod starts going crazy.The apple logo keeps lighting up and then the light doesnt come on but the logo is still there. You can hear the inside of it like trying to come on but then it just keeps doing the same thing til the battery life runs out! I really need help on this! I've tried to reset but everytime I do it it just keeps doing the same thing. I dont know if i should wipe all my songs off of itunes or what but im so confused and so aggravated with it. PLEASE HELP ME! I'D REALLY APPRECIATE IT!
Windows XP

Welcome to Apple Discussions!
See if any of these help...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz

Problem with front row, please help!

I got a year old MBP 15" which I updated to leopard, and it works generally fine, except for the fact that when using front row and leaving it playing music for about 5 minutes idle, it freezes, goes to blank screen, but still plays the playlist it was set on, but when I use the remote control, or press keys, it keeps frozen, the only way to quit is to force power off.
Please help me, as I really like Front Row and my MBP is my hub for playing music in reunions.
Thanks in advance

I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
<% try { %>
<jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
<% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
<% try { %>
<%
rowDelete.remove();
%>
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
I really hope this helps someone else because it took me forever to get a workaround!
~Rob Lundeen

Activation problems with Cingular. Please help very frustrated

Ok, here is the deal, I live in Orlando, FL most of the time, but I am in Michigan and I bougt 2 iphones today, that was 1000 bucks, plus 200 in security deposits. I went to cingular, payed the deposit, and now that im at home, i cant register the product. I have been on the phone with cingular suppost getting different reasons why i cant answer but i still want to check it out here. Im getting an address verification problem. The guy is saying that when we payed the sucurity deposit, we put our florida market address on file with the Pre Approved Credit Check Number. THere saying our sim cards are michigan sim cards, and its not letting me register because of the sim cards are not in the same market as the credit check number. I tunes keeps giving me an error of address though. Is anyone receiving this same problem? The error is saying that they cannot verify the address on file, as the address that im typing in, even though it is the same address. We tried changing everything to michigan, and still got the same problem. We changed the address on the credit check number, and the address that im trying to register in michigan.
Please Help
Rodd,
Thanks guys
You can only imagine that im upset not being able to even power the thing up. It wont let you go past the emergency call feature since its not activated.
*****

Heres what you have to do Rodd...I used to be a RSM for Cingular.
First you need to cancel your first activation because your sim cards have been set up with activation in Michigan you will get a Michigan area code, prefix, etc. If you did not set it up with the exact are that you paid the deposit in, then you will not be able to activate it.
Ex: if I live in Texas, but want a California number, I have to go to Cali and set up my account, and then come back to Texas and I will have my Cali number while living in Texas.
If you tried to set it up wrong to many times it flags your account.
Either go back to the store you got them in and pay the security deposit again, or go to the closest ATT store in the area you would like to have your area code, prefix, etc. in.
Example: if you want a Michigan number, then go to Michigan..and set up your account all in the same place that you want your number....Billing addresses can be different but the activation address will be where the iPhone number is given from.
Hope this helps..God bless

Immportand. Problems with MB. Please help.

Hello
Im having a problem with my PC in the moust unpleasent moment as I can’t do my college work and I cant afford new PC in the next 4 months, so any help with my problem will be grealty appriciated.
OK.
Here is my problem.
When I work and that’s usualy using Internet and Office XP my PC is starting to slow down (mouse cursor is scroling very slow, I cant close windows) and afther a while its turning off. Whell its not turn off exactly because CPU, GPU and PSU fans are still working but the monitor is turing on stand by. When this happens I can’t do restart so I have to puss power on/off button on the case of the PC to turn the PC off. If I try to turn in on afther that NumLock and CapsLock indicators on the keyboard will flash for a second as well as monitor and again only CPU, GPU and PSU fans works but the system is not starting. This happened several times and every time till now I waited for a day to start my PC again. That was till the last time. Now afther 4 days I still can’t to start my PC.
NOTE.
When I opned the case four led diodes that are on my MSI mainboards were lightning red. In the manual explanation for this is “The procesor might be damage or not instaled properly. Damage/discharge lithium batery”
I doubt that the problem is procesor because the PC will never start if the procesor is damaged of instaled properly.
Iv also changed lithium batery but the problem remained.
And another thing. PC Alert 4 somethimes showd that CPU and system tempetarure were 78 C. Afther this restart the system and went in bios to see if that was the real temperature but the bios showed 32 C for procesor and 22 for system.
I have the latest drivers, bios and updates for windows. Iv checked for viruses with the latest updates for Pc-cillin 2002 and I didn’t find any viruses. Iv cheked every componets on other configuratios and they worked fine.
Now a frend of me told me that the cause of problem are condenzator on mainboard araund the procesor.
If you know whats is the problem please help me to resolve it.
Thank you..

Please tell us more about your system, including PSU.
It sounds very, very much like a melted condensator. It is not hard to check:
Open case and look for brown or darkcoloured... yecch... on the motherboard. Another symtom will be harder and harder to start and more and more frequent shut downs.
There are people here I believe that can guide you to change them. I would get another board because the problem might happen again. In either case, save all important work, logins, etc. to an external unit. Mail it to a friend if nothing else is available.

I suppose it is the problem with socket connection,Please help

Hi,
I'm trying to build a chat server in Java on Linux OS.I've created basically 2 classes in the client program.The first one shows the login window.When we enter the Login ID & password & click on the ok button,the data is sent to the server for verification.If the login is true,the second class is invoked,which displays the messenger window.This class again access the server
for collecting the IDs of the online persons.But this statement which reads from the server causes an exception in the program.If we invoke the second class independently(ie not from 1st class) then there is no problem & the required data is read from the server.Can anyone please help me in getting this program right.I'm working on a p4 machine with JDK1.4.
The Exceptions caused are given below
java.net.SocketException: Connection reset by peer: Connection reset by peer
at java.net.SocketInputStream.SocketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:119)
     at java.io.InputStreamReader$CharsetFiller.readBytes(InputStreanReader.java :339)
     at java.io.InputStreamReader$CharsetFiller.fill(InputStreamReader.java:374)
     at java.io.InputStreamReader.read(InputStreamReader.java:511)
     at java.io.BufferedReader.fill(BufferedReader.java:139)
     at java.io.BufferedReader.readLine(BufferedReader.java:299)
     at java.io.BufferedReader.readLine(BufferedReader.java:362)
     at Login.LoginData(Login.java:330)
     at Login.test(Login.java:155)
     at Login$Buttonhandler.actionPerformed(Login.java:138)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1722)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:17775)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:4141)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:253)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:261)
     at java.awt.Component.processMouseEvent(Component.java:4906)
     at java.awt.Component.processEvent(component.java:4732)
     at java.awt.Container.processEvent(Container.java:1337)
     at java.awt.component.dispatchEventImpl(Component.java:3476)
     at java.awt.Container.dispatchEventImpl(Container.java:1399)
     at java.awt.Component.dispatchEvent(Component.java:3343)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3302)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3014)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2967)
     at java.awt.Container.dispatchEventImpl(Container.java:1373)
     at java.awt.window.dispatchEventImpl(Window.java:1459)
     at java.awt.Component.dispatchEvent(Component.java:3343)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:439)
     at java.awt.EventDispatchThread.pumpOneEvent(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:131)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
     My program looks somewhat like this :
1st class definition:
public class Login extends Jframe// Login is the name of the first class;
Socket connection;
DataOutputStream outStream;
BufferedReader inStream;
Frame is set up here
public class Buttonhandler implements ActionListener
public void actionPerformed(ActionEvent e) {
String comm = e.getActionCommand();
if(comm.equals("ok")) {
check=LoginCheck(ID,paswd);
test();
public void test() //checks whether the login is true
if(check)
new Messenger(ID);// the second class is invoked
public boolean LoginCheck(String user,String passwd)
//Enter the Server's IP & port below
String destination="localhost";
int port=1234;
try
connection=new Socket(destination,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStream = new BufferedReader(new InputStreamReader(connection.getInputStream()));
outStream=new DataOutputStream(connection.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
System.out.println("connected to "+destination+" at port "+port+".");
BufferedReader keyboardInput=new BufferedReader(new InputStreamReader(System.in));
String receive=new String();
try{
receive=inStream.readLine();
}catch(IOException ex){ error("Error reading from server");}
if(receive.equals("Logintrue"))
check=true;
else
check=false;
try{
inStream.close();
outStream.close();
connection.close();
}catch (IOException ex){
error("IO error closing socket");
return(check);
// second class is defined below
public class Messenger
Socket connect;
DataOutputStream outStr;
BufferedReader inStr;
public static void main(String args[])
{ Messenger mes = new Messenger(args[0]);}
Messenger(String strg)
CreateWindow();
setupEvents();
LoginData(strg);
fram.show();
void setupEvents()
fram.addWindowListener(new WindowHandler());
login.addActionListener(new MenuItemHandler());
quit.addActionListener(new MenuItemHandler());
button.addActionListener(new Buttonhandle());
public void LoginData(String name)
//Enter the Server's IP & port below
String dest="localhost";
int port=1234;
int r=0;
String str[]=new String[40];
try
connect=new Socket(dest,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStr = new BufferedReader(new InputStreamReader(connect.getInputStream()));
outStr=new DataOutputStream(connect.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
String codeln=new String("\n");
try{
outStr.flush();
outStr.writeBytes("!@*&!@#$%^");//code for sending logged in users
outStr.writeBytes(codeln);
outStr.write(13);
outStr.flush();
String check="qkpltx";
String receive=new String();
try{
while((receive=inStr.readLine())!=null) //the statement that causes the exception
if(receive.equals(check))
break;
else
     str[r]=receive;
     r++;
}catch(IOException ex){ex.printStackTrace();error("Error reading from socket");}
catch(NullPointerException ex){ex.printStackTrace();}
} catch (IOException ex){ex.printStackTrace();
error("Error reading from keyboard or socket ");
try{
inStr.close();
outStr.close();
connect.close();
}catch (IOException ex){
error("IO error closing socket");
for(int l=0,k=1;l<r;l=l+2,k++)
if(!(str[l].equals(name)))
stud[k]=" "+str[l];
else
k--;
public class Buttonhandle implements ActionListener
public void actionPerformed(ActionEvent e) {
//chat with the selected user;
public class MenuItemHandler implements ActionListener
public void actionPerformed(ActionEvent e)
String cmd=e.getActionCommand();
if(cmd.equals("Disconnect"))
//Disconnect from the server
else if(cmd.equals("Change User"))
     //Disconnect from the server & call the login window
else if(cmd.equals("View Connection Details"))
//show connection details;
public class WindowHandler extends WindowAdapter
public void windowClosing(WindowEvent e){
//Disconnect from server & then exit;
System.exit(0);}
I�ll be very thankful if anyone corrects the mistake for me.Please help.

You're connecting to the server twice. After you've successfully logged in, pass the Socket to the Messenger class.
public class Messenger {
    Socket connect;
    public static void main(String args[]) {
        Messenger mes = new Messenger(args[0]);
    Messenger(Socket s, String strg) {
        this.connect = s;
        CreateWindow();
        setupEvents();
        LoginData(strg);
        fram.show();
}

I have a problem with my microphone, please help if you can

Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.

Originally Posted by tav2000
Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.
Hi tav,
While waiting for other forum members to post..
Perhaps you havent installed the latest drivers yet? (link HERE)
Cheers!

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

I have a problem with iphone 3gs please help

ok my iphine was jail broken and i restored it as it was and now its stuck on recovery mode and i cant restore it everytime i do it gives me the message with 1015 i thikn please help me if u have a solution.

If I understand correctly, you are in Romania and the phone was bought from Sweden. In order to unlock that device, you have to have the carrier in Sweden unlock it. If your phone just won't power on, then wjosten has provided the steps needed to try and power it on. Otherwise, if you want the phone "unlocked" or if it has been "jailbroken" or an unauthorized version of software has been put on the iphone, nobody can help you here.

PROBLEM WITH NEW ROW --- PLEASE HELP

Hello,
I've had it with the framework. It's been 20 hours and counting that I am trying to insert/validate a new record.
Things just don't work as advertised.
Here's the situation:
I have an entity object with various validation rules in the validate() method.
Then I have a simple JSP page to insert new records.
At submit of button, I follow the framework's default
create new row and fill it up, with the difference
that i need to validate the row as soon as I fill it up
with data from the http request:
<jbo:OnEvent name="Create">
<jbo:Row id="newrow" datasource="ds" action="CreateInRange" >
<% try { %>
<jbo:SetAttribute dataitem="*" />
<%
newrow.validate(); //******* NOTICE HERE THAT I VALIDATE
} catch (JboException ex) {
newrow.remove();
throw ex;
} %>
</jbo:Row>
</jbo:OnEvent>
Unexpected behavior 1: If the validation fails,
newrow DOES NOT GET REMOVED!!!! I know this
since when I view data thru a data table component,
the row is there WITH THE ERROR INFORMATION set!!.
If I do a commit transaction, then the erroneous information ENDS UP IN THE DATABASE!!!!!
Unexpected behavior 2: If I do a rollback, every
call to subsequent pages results in a jsp error:
java.lang.ClassCastException: oracle.jbo.html.jsp.datatags.OnEventTag
PLEASE HELP.
Chris Lambrou

I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
<% try { %>
<jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
<% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
<% try { %>
<%
rowDelete.remove();
%>
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
I really hope this helps someone else because it took me forever to get a workaround!
~Rob Lundeen

Problem with "Package Spec" please help.

Hello once again.
I'm developing a master-detail form, so I'm using a "Package Spec" variable to hold the primary key value from the master form. The primary key value for the master is generated by a sequence.
Here's the package spec:
PACKAGE primary_keygen IS
pkey varchar2(15);
END;Now the master table has the following "Before Insert" Trigger .
CREATE OR REPLACE TRIGGER MASTER_NUM_GEN
BEFORE INSERT
ON MASTER
FOR EACH ROW
DECLARE
primary_key_value varchar2(15);
BEGIN
select lpad(to_char(ref_gen.nextval), 4,'0')
into primary_key_value from dual;
primary_keygen.pkey:='ABC/'||primary_key_value;
:new.Ref_Number:=primary_keygen.pkey;
END;For the detail block. I have the following "Before Insert Trigger" to generate the primary key values.
CREATE OR REPLACE TRIGGER DET1_NUM_GEN
BEFORE INSERT
ON DETAIL1
FOR EACH ROW
BEGIN
if :new.M_ref_number is NULL THEN
:new.M_ref_number:=primary_keygen.pkey;
ENd if;
END;Works quite fine if I have only one detail block. But if I have multiple detail blocks. Depending on the user's selection. i.e. After entering data into the master block, the user selects a detail block ('Letter type'- using stacked canvases for this purpose and radio buttons for selecting the view) and then Inserts data into it. here's what I do in the Detail block2.
CREATE OR REPLACE TRIGGER OREF_NUM_GEN
BEFORE INSERT
ON DETAIL2
FOR EACH ROW
BEGIN
if :new.O_ref_number is NULL THEN
:new.O_ref_number:=pkey_gen.master_key;
ENd if;
END;Now the problem is that When I enter one record into detail1, works fine, but for the second time, when I try to insert another record. the master table gets a new reference number (primary key value) while the detail block gets the previous value that was used in the first record!, so that means 'pkey_gen.master_key' is holding the old value, while in my opinion it should hold the new value, I dont know whats wrong here. If I try to insert two consecutive records into the same detail table, I get an error saying "Unique Constraint voilated", becuase the variable is holding the old values.
And lastly after it inserts the record into the database, I get a dialog box saying, "successfuly inserted 2 records into the database" and when I click ok, the Form closes by itself, any ideas on how to stop this?
I'm really stuck here. Please help me out on this.
Thanks.
Note: I'm using Form6i with Database 10g.
Message was edited by:
fahimkhan82

Hi,
Maybe the best way to start is to try building a new form from scratch. For simplicity I will assume that you have one master and one detail table. Master table has a primary key and the detail table has a foreign key to the master. Based on this, with the forms you can create a database block based on your master table. Use the wizard. Again using the wizard, create a second block based on the detail table. You'll see a screen to prompt to create a relationship. Create one by selecting the master table and the right foreign key relation. Now take a close look to all triggers automatically created by the form. Also check the "Relations" object found in you master block object tree. Note that the foreight key column in the detail table has the "Copy Value From Item" property set to monitor the master block's primary key.
This is the basic. You don't need the database triggers, except (in case you want to insert through, say, SLQPlus) the one for the master table, which will look like this:
CREATE OR REPLACE TRIGGER MASTER_NUM_GEN
BEFORE INSERT
ON MASTER
FOR EACH ROW
BEGIN
IF :new.ref_number IS NULL THEN
select 'ABC/'||pad(to_char(ref_gen.nextval), 4,'0')
into :new.ref_number
from dual;
END IF;
END;
Now you have to take care about the inserts in your form. Create PRE-INSERT trigger on the master block.
IF :master.ref_number IS NULL THEN
SELECT 'ABC/'||pad(to_char(ref_gen.NEXTVAL), 4,'0')
INTO :master.ref_number
FROM dual;
END IF;
Run the form and explore different situations to see how the form is keeping the data integrity.
Compile with Shift+K (incremental). Sometimes forms blow just because not all of the trigers were compiled properly.
Hope this helps...

Having problems with Frontrow. Please help!

Hi,
i've been trying to figure this out all day today but i haven't found any solution. hopefully you Mac Geniuses can help. now, my problem isn't that my videos won't play, because they do. they all play perfectly. okay, so when i launch Frontrow, all my video files appear under their respective folders; my TV Shows appear under the TV Shows folder and my Music Videos appear under the Music Videos folder. however, for some strange reason, these files also want to appear under the Movies folder. That means they're showing up twice! -under the Movies folder and TV Shows/Music Videos. is there anyway to fix this, because it's really cluttering my Movies folder and i admit i'm a really anal neat-freak.
Also, i have correctly labeled the video files as Movie, TV Show or Music Video under iTunes. Everything is organized well under iTunes, so i doubt it's that.
please help!!
Message was edited by: ec84

It might be because with the new update, it seems as though anything stored in the MOVIES folder , shows up under movies in Front Row. I have a folder of Transformers AVI'S in my movie folder, now it shows up in the movie directory of front row

Messaging Problem with 3.0 Please Help

I upgraded to 3.0 and now 3GS. Prior to this my wife was able to text me from her verizon blackberry, no issues and it came in on the iphone messaging. Now, somehow the iphone is changing it into an "email". The text appears as her [email protected] It's not a real email because it's not appearing in my home outlook server which is where the iphone pulls my emails from. This is way inconvient since the text doesn't appear till i go manually pull email. Anyone else have these issues. She didn't do anything different, just texts to my phone #? Techies please help.
Paul in San Diego

Hi Omid,
As far as I am aware of you will need to have a two way trust to proceed with the integration.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread.

Connection problems with WRT54G Router PLEASE HELP!!!!

Hello all,
Im having a huge issue and im hoping that someone can help me. Awhile ago i changed what i believe to be my router settings using 192.168.1.1 and i believe i added WEP secuirty. I changed my password i know that much. Anyway my problem is this - When i try connecting a router to my computer, i cannot access the internet OR the 192.168.1.1 setup. I just get a yellow caution sign on my wireless settings (running Windows 7), but when i connect my cable modem (Comcast) to my computer, i can access the internet. I have reset both the router and my cable modem MANY times (hard resets) and STILL cannot get the setup page for the router. I have TWO WRT54G rourters and BOTH do the same thing when connected to my desktop , yet BOTH work fine on an old machine running XP, so it is something i did with this computer. Can someone please help me solve this issue? any hlep would be appreciated as i am stumped and do not know how to fix this and cannot use WI-FI or my Xbox 360 until i can fix this..Thanks.

Check the IP address of your computer and see if it's in range with the router's IP.
To learn how to do so, click here.

I'm having problems with my ringtones please help

I have tried everything to fix my BB Curve problem even down to the battery.   I have custom ringtones set for my husband and other family members. So whenever they call or text I know who it is.. Now my issue is that if I get a text from my son his ringtone will sound than if I get a standard text my son's ringtone will go again. Not the default for just regular ringtones. I took off my facebook becuase someone said that could be a problem. Verizon sent me a new phone and I entered everything manually so if there was something wrong I wouldn't transfer the problem to the new phone. It's not fixed. If someone could please help me. I'm getting ready to turn my BB off completely it's that frustrating. Thank you for any help.

It sounds as if you are saying that any "non-specific" SMS sender receives that text tone of the last one you have set a personal tone for who has texted you?
I don't know. I can only say that if you use those instructon in the guideline, they work.
There is a user here named Cathlabnurse, she has a good understanding of these settings... Maybe you could send her a Private Message to review your settings with you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Problem with Power Adapter. Please Help!

Similar Messages

Maybe you are looking for