Problem with power button

hi, I bought my iphone 5 last year in November. It seem to have some problem with its power button cause it doesn't work when i press it. Its still under warranty but the problem is im not anymore in the country i purchased it from which was UK and now im in Pakistan. Any help as to what my options are now?

Apple doesn't do such repairs only.
The iPhone would be exchanged under warranty by Apple only and that is your ONLY option if you don't want to pay for a 3rd party there to try to repair it.
An iPhone purchased in a EU country can be exchanged under warranty in any other EU country.

Similar Messages

  • I HAVE I PROBLEM WITH POWER BUTTON

    HI.......I had a problem with the power button, with less than 6 months of use, I had to warranty apple here in Brazil, to my surprise they said I would have to refer to the country that I bought in the USA ... and that guarantee that it was said that international.
    very frustrating

    Your iPhone warranty/support is only valid in the US. Thus, to obtain any service you will have to physically return the phone to the US...you can't mail it directly to Apple. You can send it to a friend/relative, in the US, and they can take it to Apple for you.
    You will not receice any authorized service, in Russia, for this phone.

  • Problems with power button HP dv5

    Hello,
    I have a HP Pavilion DV5 that warranty was over.
    The main problem of this notebook is the power button ( I think ). When I click it, it blinks once the power led ( white color ) and the nothing happens. No screen image, no fan movement. Nothing.
    I opened it and I noticed that the link from power button to the motherboard was not in very good status.
    So I decided to try with another link cable from another broken laptop. The same thing happens.
    Now I'm kinda stuck because I cant start my own laptop. There's any suggestion?
    There's a way to "direct turn on" without the power button?
    Any help is apreciated.
    PS. Sorry for my bad english.

    Same problem I had,I removed the damaged white ribbon connector, taped the ribbon wires over the wires from  the     board,so that the end of the ribbon was over the leads, then,tacky as it sounds I cut about a 1/2inch of a cigarette filter and taped  it over the area where the leads need to make contact . installed keyboard with its screws to hold down the cig filter tight over the taped down leads. quick fix that workes without soldering on another connection

  • I have problem with power button on my iPhone 5, doesn't work.

    everything worked and suddenly button stopped working, they say it's a factory defect, bought in America live in Russia, can I put in for free repair to an authorized Apple store?

    Your iPhone warranty/support is only valid in the US. Thus, to obtain any service you will have to physically return the phone to the US...you can't mail it directly to Apple. You can send it to a friend/relative, in the US, and they can take it to Apple for you.
    You will not receice any authorized service, in Russia, for this phone.

  • Weird problem with power shut down msi nforce 4 platinum

    recently i have flashed the latest bios 1.9 of msi nforce 4 u platinum, everything work fine untill yesterday.some stanges happened......
    my power doesnt have a on and off button on it ,every time i turn off the pc , i have to turn off the power button of a socket near by the pc.everytime it works fine, but yesterday when i turn on the power on button of that socket , the pc automatic start, i didint turn on the power button of pc, what a weird problem..   also when i  go into os , the system time also changed, although i can turn them back to correct one in bios and os, but when i turn the pc off , it changed again...   could any one help me out , what is teh real problem of my pc. some virus ?thanks a lot.
    weird problem with power shut down  msi nforce 4 platinum

    it seems the first question has been solved. cos today when i turn on pc, the oc set up is gone ,in bios, it back to the original set up.i cant save my oc setup, so it definitely a battery problem!!!!!!!!!!!
    i take the old battery t o a saler , there they massure it with voltmeter, it shows only 0.97v, but in bios 1.6 it shows 1.82v, so waht is the real meaning of that reading num in bios for battery?it cant be the real voltage of the battery. i buy a new one ,this one is maxcell 2032   hitachi, the old one is shi  t   panansonic 2032 .the new one shows 3.17v with voltmeter, then i come back , installed the  new battery , in bios this time it shows 2.3v in bios 1.6. so the reading num in bios for battery is definitely is not a real reading for your battery.
    i will keep my pc in 24/7 using , and i will look if the battery is sable or not , cos untilll now no one come out for a real explain for this  stupid battery problem of msi nofroce 4 platinum.i dont want change battery every 2 or 3month, what a real sick of this!!!!

  • 4540s Won't power up with power button.

    Hi my 4540s Won't power up with power button. The power button and the 2 buttons(globe and wifi) on the far right will blink. But wont power up. 
    BUT, if I reseat the memory it will power up. (It's not the memory I've tried all new stick with same results) I've tried the batterty out power button down as well.
    Also, once I do have laptop powered up it runs fine. If I restart laptop by clicking retstart it will retsart no probs. BUT, if I shut down and try turn back on it won't.
    Little help please

    This should help:
    http://support.hp.com/us-en/document/c01732674
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Problems with home button on iPhone 4

    problems with home button on iphone 4

    If its due to sensitivity issues, these self help guides might help.
    http://www.youtube.com/watch?v=zNwr_mxgs9Q
    http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
    By the way, alcohol based hand sanitisers work too.
    Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
    One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

  • Grey screen with message "turn off computer with power button until switch off then press again power button"

    Dear all,
    I'm very hungry with my iMac and my Time Capsule :
    I try for two weeks to restore my iMac without any success...
    I wait 80 hours to finally have the message again and again : "to restart your computer : turn off computer with power button until switch off then press again power button".
    But my iMac do not work !
    Could you help me?

    Hello, that's a kernel panic...
    http://thexlab.com/faqs/kernelpanics.html
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X 10.6 Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Problems with parameter button in Crystal Report Server  2008

    Dear all,
    I have problems with parameter button in Crystal Report Server 2008.
    when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button'  on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter'  First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
    Could any one help me with this?
    I appreciate looking forward to your reply
    Ketya

    Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

  • Problem with Information button in WAD

    Dear Mates,
    I have a problem with Information button in WAD template.
    I have two queries in web template. those two queries are in two tabs( i used Tabstrip ) respectively.
    if i press first tab it shows query1 and if i press second tab it shows query2 absolutely.
    problem
    when i am in first tab, if i click information it will show information about query1, but when i am in second tab,
    if i click information it will show information about query1 only..
    i need it to show information about second tab.
    Please help. Its urgent. Full Reward points will be given.
    Thanks in advance.
    Regards,
    Ranganath

    check out this link
    http://www.mhprofessional.com/downloads/products/0071640266/0071640266_chap01.pdf

  • A really annoying problem with a button/movie clip

    I am having a problem with a button! its driving me insane
    because i managed to do it last week, but that was by chance and
    now i can't remember how i did it!
    I can get the button (i'm using gelright from the common
    libraries panel) and convert it to a movie clip(by pressing F8) and
    even attach a behaviour but when i play the movie it doen't work!
    when i move the curser over the button it changes into a hand, but
    will not act like a button, even though i have set the behaviour to
    'on release, go to and play keyframe 2'.
    Please help me, for the sake of my laptop goin through the
    wall!

    virgosam20 wrote:
    > first, i found the button i wanted in the common
    libraries (gelright) and
    > added it to the stage. I resized it and converted it
    into a symbol as a movie
    > clip. Then it got added to my library.
    > Then i deleted it from the stage and replaced it with
    the movie cip version i
    > had just converted it to. so now i have the same object
    on the stage, but now
    > its a movie clip and not a button.
    ok - you are running yourself around in circles - why did you
    delete it to the stage only to add it
    again? once you converted it to a movie clip, you had what
    you wanted on the stage - but then you
    deleted it and dragged another instance of the same symbol
    back onto the stage - there's no reason
    to do that.
    > Then i double clicked on it to bring up the movie clip
    timeline, but instead
    > of saying 'top, down, over, hit' (or whatever it says),
    it jsut said 'layer 1'
    > (but this was not my original stage as i have a number
    of layers on that one).
    Right - this is expected because yoyu are now inside the
    movie clip timeline - not the button timeline.
    > When i double clicked on it again, it brought up the
    right headings (top, down,
    > over, etc),
    Right - because by double clicking the button symbol you were
    then brought to "edit mode" for the
    button symbol.
    but there were about 5 layers that showed the different
    layers for
    > the original button.
    Huh? What "5 layers"? What do you mean "original" button -
    per your description there has only ever
    been 1 button you have been working with.
    > I think i have to add the button to each of the
    headings, bt there is no room,
    Lost you completely now - what do you mean add the button to
    each heading? I have no clue what you mean.
    > as when i did it before, there was only one layer for it
    and i had to insert
    > the key frames myself.
    Still losing you here.
    > I then added a behaviour to it using the Behaviours
    pannel, (selected
    > movieclip, then 'go to and play....') and it appears in
    the behaviours pannel.
    > But when i got to Play Movie, although the curser
    changes into a hand, the
    > button does not work.
    That's because you are applying a behavior for a button to a
    movie clip instead.
    I think you went wrong when you converted the button to a
    movie clip - i have no idea why you did
    that or why to think your button needs to be in a movie clip.
    >
    > Hope that can help you with what i've done and you can
    tell me where i've gone
    > wrong.
    >
    I just think you don't understand how timelines, symbols or
    buttons work yet in flash.
    1. drag a button to the stage.
    2. select it and open the Behaviors panel (dont double click
    it to edit it).
    3. add your actions.
    4. test movie.
    (no need for a movie clip here.
    -chris

  • Problem with the button

    Hi my name is Lior Sassi from Israel. I bought an iPhone 5 in Amsterdam. Now I have a problem with the button on the iPhone and I still have a guarantee. Where can I fix the problem?

    The Warranty is only valid in the Original Country of Purchase.
    For Troubleshooting your button issue... See Buttons and Switches here...
    http://support.apple.com/kb/TS2802

  • Problem with sleep button

    I have problem with sleep button on my hp pavilion dv6-1354us When i press FN + F5 nothing happend. I reinstalled drivers for hp quick lunch buttons but the same problem.. Any solutions ? Thanks.

    The operations of FN functions mainly based on the intrinsic working between the drivers and System BIOS.
    If you already upgraded the Quick Lanuch Driver, then you may want to upgrade your System BIOS to the latest one in HP website to see if it can resolve the problem for you.
    However, you need to be careful while upgrading your System BIOS.

  • Hey everyone I am haveing problems with Flash Button

    Hello everyone I am new here so I am haveing problems with
    Flash Button because of the html address it wont go to the address
    that i put into it it keep going to
    http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesigner.net
    why does it do that? this is a link problem issue with flash
    button in macromedia dreamweaver 8?
    someone please help me?
    Jeremy

    >
    http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesig
    > ne
    > r.net
    In the dialog box for the Flash Button, in the link box, put
    the full
    absolute path if an external page. Including the
    http:// part.
    http://www.example.com/page.html
    for pages inside your site- use the browse to file icon, and
    use a relative
    path.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Problem with Masked Buttons

    As it stands i have a button called Start, when this button is hovered over, three more buttons appear at its side (all masked)
    I'm having trouble actionscripting the buttons, ive tried putting the AS on the button
    on(release){
    gotoAndStop(2);
    seen as everything so far is done on the first frame on various layers i just need it to go to frame 2. but this doesn't work.
    the code that's on the start button is
    on(rollOver){
    Startmenu.play();
    Start menu is the invisible movieclip which has the masks and rollout buttons in.
    anyone got any ideas?

    start button does overlay the other buttons and it is on the main timeline. as is the movieclip which activated the 3 buttons when the start button is rolled over with the mouse.
    Date: Fri, 26 Mar 2010 08:39:42 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem with Masked Buttons
    does your start button overlay the other buttons?
    is your start button on the main timeline?
    is the movieclip with the 3 buttons on your main timeline?
    does that movieclip respond to the mouse (and thereby intercept mouse events intended for the buttons it contains)?
    >

Maybe you are looking for