Problem with power

I allready h569 (coave a lenovo zre i3). it's working as well and the battery life is OK. turn off, restart and sleep all are Ok, but when I turn it off for a while it's not turning on again as normal.I have to switch trun on button several time and plug and unplug the power to back to normal mode. unfortunately in my country there is no lenovo branch. what should i do?

which model of lenovo do you have? g560?

Similar Messages

My HP Notepad 6730b has a problem with power

Hi all,
My HP Notepad 6730b has a problem with power. I can't power into the laptop. I have checked the power adapter and it works fine. No lights flash when i plug it into power. Can any one please help??

IPad bought on May 29. This is the first attempt to use. I also bought the screen protector and apparently the problem started after I installed the shield and the battery charged, which was low.
I followed the instructions, made the recovery at iTunes, sync, but I could not turn on the Touch Screen. The clock remains stopped at 9AM. I will try an Apple store in Brazil to see what is happening and then notice what happened. Best regard and thanks for the help

Weird problem with power shut down msi nforce 4 platinum

recently i have flashed the latest bios 1.9 of msi nforce 4 u platinum, everything work fine untill yesterday.some stanges happened......
my power doesnt have a on and off button on it ,every time i turn off the pc , i have to turn off the power button of a socket near by the pc.everytime it works fine, but yesterday when i turn on the power on button of that socket , the pc automatic start, i didint turn on the power button of pc, what a weird problem.. also when i go into os , the system time also changed, although i can turn them back to correct one in bios and os, but when i turn the pc off , it changed again... could any one help me out , what is teh real problem of my pc. some virus ?thanks a lot.
weird problem with power shut down msi nforce 4 platinum

it seems the first question has been solved. cos today when i turn on pc, the oc set up is gone ,in bios, it back to the original set up.i cant save my oc setup, so it definitely a battery problem!!!!!!!!!!!
i take the old battery t o a saler , there they massure it with voltmeter, it shows only 0.97v, but in bios 1.6 it shows 1.82v, so waht is the real meaning of that reading num in bios for battery?it cant be the real voltage of the battery. i buy a new one ,this one is maxcell 2032 hitachi, the old one is shi t panansonic 2032 .the new one shows 3.17v with voltmeter, then i come back , installed the new battery , in bios this time it shows 2.3v in bios 1.6. so the reading num in bios for battery is definitely is not a real reading for your battery.
i will keep my pc in 24/7 using , and i will look if the battery is sable or not , cos untilll now no one come out for a real explain for this stupid battery problem of msi nofroce 4 platinum.i dont want change battery every 2 or 3month, what a real sick of this!!!!

I HAVE I PROBLEM WITH POWER BUTTON

HI.......I had a problem with the power button, with less than 6 months of use, I had to warranty apple here in Brazil, to my surprise they said I would have to refer to the country that I bought in the USA ... and that guarantee that it was said that international.
very frustrating

Your iPhone warranty/support is only valid in the US. Thus, to obtain any service you will have to physically return the phone to the US...you can't mail it directly to Apple. You can send it to a friend/relative, in the US, and they can take it to Apple for you.
You will not receice any authorized service, in Russia, for this phone.

Problem with power button

hi, I bought my iphone 5 last year in November. It seem to have some problem with its power button cause it doesn't work when i press it. Its still under warranty but the problem is im not anymore in the country i purchased it from which was UK and now im in Pakistan. Any help as to what my options are now?

Apple doesn't do such repairs only.
The iPhone would be exchanged under warranty by Apple only and that is your ONLY option if you don't want to pay for a 3rd party there to try to repair it.
An iPhone purchased in a EU country can be exchanged under warranty in any other EU country.

Problem with power supply and motherboard

I got problem with the cpu.this is the 2nd time my cpu cannot on. It keeps on off. It look likes there is no enough power supply.Last time the cpu also keep restart n there was also problem with the speaker. The HP technician has changed the motherboard.got frustated coz im in high expection on the HP Products. The model itself has problem or only my cpu got problem? Really hope the HP can replace d new one to me rather than the cpu always get problems n stuck my work for 3 to 5 days just to wait the technician comes to solve the problem...Now i have to wait till monday...

Hello @Nazlina,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/t...
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Lenovo T60 Strange problems with 'power management/power guage'

Guys
Since doing a system update my battery guage keeps displaying a grey guage with 3 - inside and if you run the mouse of the icon it says "Battery Not Installed" then 1 minute later it goes green with 100%. Its so random all i can imagine is that there is a problem with the power mangement software, but i have uninstalled the new version and installed an older version but this again doesnt work
I have tried to disable the PM driver from device manager and the Atmel TPM device but these do nothing
I have heard that this was quite common but cant find a solution
Can anyone help
Regards
This was found doing a google search
I have a strange issue. I have a Lenovo T60 laptop and I am experiencing problems with the power management/power guage.
It will often show the battery not installed (power gauge is a greyish-white color with dashed lines) or it shows a red X. It does not matter if I am on AC power or on Battery power, it will show the full range of power, battery level, not installed, or an error.
I have searched Lenovo's site and I seem to remember seeing an FAQ about this, but now that I need it, I cannot find it.
What can I check or do to stop this? While it is annoying, I am not sure if I am having a battery problem or not. I did check my battery on Lenovo's site to see if it was recalled and it is not.
I do appreciate any help that any one can give me.
Message Edited by iceman on 05-29-2008 05:05 PM
Message Edited by iceman on 05-29-2008 05:05 PM

Can anyone help?

Ipod Mini - Problem with power

Hi all!!!
i've got a problem with my Mini Ipod.
Suddendly it seems that the battery of my Ipod doesn't recharge. I've changed computer (both with Windows XP) and cable and i've tried also with an iHome alarm clock/Radio. But nothig seems to work so i think that the problem is with the iPod.
Forward the Ipod seems to "tilt" because sometimes when i connect it to the pc the monitor freezes with the picture of the battery recharging but it's frozen and i need to reset it also after i have to disconnect it from the PC.
May some of you can help me giving some good advice!!
thanks and bye
Dario

Not too sure, but I believe it is the time to have the battery replacement for your iPod mini. Normally, the battery needs to be replacement after 18-24 months

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

X60 - Screen flickers and screen shutoff - problem with power management or hardware failure?

Hello everyone,
this is one of the longest unsolved threads in Lenovo Forum. To keep a summary of the posts for new victims (as suggested by PDG in page 23, edited by me):
Bottom line:
This is a video driver problem
If you have XP and can, roll back to 4450 (I currently run with 4860 in XP without problems)
If you have Vista you are basically screwed. No one has posted any link to a functioning V32 driver.
You can find a link to a backlevel XP driver on p.21 or thereabouts.
{Windows 7, Linux} may or may not help. (no problems for me with Ubuntu 8,9 currently)
LENOVO WILL NOT HELP. Don't waste your time. Lenovo will say its a hardware problem because that's all they know and charge you big bux to do basically nothing when you ship them your PC.
This is the original entry:
Hi,
I always stay at the current level of available drivers with System Update.
In the last days the screen starts to flicker / jiggle once in several minutes until suddenly the whole screen turns black and can't be reactivated. I then put the X60 into standby and it wake up right after. The screen is then turned on again...
Its a 1706-AA7...
I rolled back the graphics driver to an earlier version, didn't help. Does it look like some faulty power management? Or a potential HW issue?
dsp
UPDATE: this time the screen was totally light blue... same workaround: standby -> wakeup
UPDATE2: I removed the driver completely and installed it manually from the driver matrix page. It took a couple of reboots. In between resolution was down to 640x480 with 4 bit. Not its working again without flickering...
Was this a wrong driver pushed via System Update?
Message Edited by dsp on 04-07-2008 07:01 AM
Solved!
Go to Solution.

Hi,
no - 2 video adapters are correct! You should not remove them. Read the Intel FAQ here.
Strange - could it be that it also updated your video driver the same time? When I rolled back the video driver to a very old version, I never experienced the flicker again. No colorful blanks anymore.
The Intel downloadpage offers a backlevel driver for the chipset;
* Microsoft Windows* XP
* Driver Revision: Production Version 14.32.3
* Package: 43262
* Graphics: 6.14.10.4906
* HDMI Audio: 5.10.0.1030 But I don't know whether I should try. This release doesn't appear in the Thinkpad video driver history. Hopefully the bug will be acknowledged and they work for a fix. Where should bugs be reported, when they are not taken serious by the first level support?
dsp
Message Edited by dsp on 05-06-2008 01:19 PM

Problems with power button HP dv5

Hello,
I have a HP Pavilion DV5 that warranty was over.
The main problem of this notebook is the power button ( I think ). When I click it, it blinks once the power led ( white color ) and the nothing happens. No screen image, no fan movement. Nothing.
I opened it and I noticed that the link from power button to the motherboard was not in very good status.
So I decided to try with another link cable from another broken laptop. The same thing happens.
Now I'm kinda stuck because I cant start my own laptop. There's any suggestion?
There's a way to "direct turn on" without the power button?
Any help is apreciated.
PS. Sorry for my bad english.

Same problem I had,I removed the damaged white ribbon connector, taped the ribbon wires over the wires from the board,so that the end of the ribbon was over the leads, then,tacky as it sounds I cut about a 1/2inch of a cigarette filter and taped it over the area where the leads need to make contact . installed keyboard with its screws to hold down the cig filter tight over the taped down leads. quick fix that workes without soldering on another connection

Problem with power plug

Hey,
So I have gone through three power adapters so far due to fraying and I just had to buy a new one. When I plug it in the light usually goes on but it doesn't charge unless I wiggle the plug around and twist it to the side. The power cord is brand new and has done this since I started using it a couple weeks ago. I have tried to clean out the part in my macbook where the plug goes with a dry toothbrush but that didn't fix anything.
Does anyone know what is wrong?
Thanks
Spencer

See if any of these tips help.Use and cleaning of MagSafe power connector
You may have a bad connector on the MacBook side. You should have it looked at by Apple before it damages your computer.

Problem with power list RFX on Sourcing

Hello,
When i refresh the power list of FRX created on SRM, there is no output, any result.
Please how can i resolve it?
Thanks

POWL-Based Reports (SRM_702_POWL_COCKPIT)
POWL User Interface Optimization(SRM_701_POWL_UI_OPTIMIZATION)
And search other with *POWL* in switches you will find.
Also follow Note# 1627366 1461713 and 1134640.
Cheers
Ankit Jain

Problem with Power Vision

Not a webOS device. Moved to Wireless Providers.
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

First, there is no indicator light that flashes when an alert or notification has occurred, or a call came in, etc, like the 755p had. Why would this feature be removed?? If the phone screen is turned off and on vibrate (like how my phone sits while at work), you would never know unless you checked the phone or had alerts set to repeat constantly and vibrate my desk all day long. I can live with that I suppose but an update or application that could fix this would be awesome.
PalmOS had a lot of nice features that do not exist in Windows Mobile...
There is a program in development and available for testing named "Treo Alerts" that I think can blink the LED. You can get it here: http://discussion.treocentral.com/showpost.php?p=1462706&postcount=2050
(I haven't tried it myself.)
The real issue I have is with the phone always trying to connect to Sprint Power Vision Data services via #777 to synchronize my email accounts. I have all email (Outlook and Pop Gmail) settings to manually check for new mail, and the checkbox UNCHECKED for allow internet connection. But every few minutes or so a message will pop up asking to connect to the internet even though everything is set to manual. It is SO ANNOYING so currently I just have it set to stay connected.
As long as the phone is not actually transmitting, I suspect you do not save much if any power by connecting only for voice rather than voice and data. It would be interesting to know one way or the other.
Post relates to: Treo 800w (Sprint)

Dell Precision 690 - Problem with Power On Button

Hi
Over the last week or so the power on button on my Dell Precision 690 is starting to get more difficult to press. Today I cannot power on PC as it has become completely jammed. It looks like I am going to have to remove it. Does anybody know exactly how to do this as its not in any of the users documentation.
Would really appreciate any help as I need to get PC back up and running.
Thanks

Whew! That was some kinda mess.
Basically what had happened was that the button is all plastic, and the plastic acts as a hinge and spring to push the button "rod" to make contact with the actual teeny tiny little micro switch. I started taking parts out, in the same process you'd use to replace the system board (that's on an "assembly"). At some point it looked like I could wiggle one of the plastic face plates that frames the CD/DVD drives out, and then I saw there was a second plastic plate around the power button and system lights. I bent that da*&^%ed stupid metal face plate after finding there were still 2 more screws that I couldn't reach, just enough to slip out the second facing, and then put the whole thing back together again, without the button installed. With no faceplate over the power switch, you can take a pencil, and use the eraser side to click the power switch on.
The machine is really pretty long in the tooth now, so we'll be working on a replacement soon!
Still, if I had been able to easily remove the other large black panel, things might have gone a lot smoother... Lousy design for that particular part of the unit...

MuVo TX 256 mb - problem with power

After week after I bought my mp3 player, MuVo going off when I turn it on.
First on the screen show up message "Creative", after while "MuVo" and then player going off. I formated MuVo but this isn't support my problem.
I don't know what to do. I tried upgrade firmware but i have WIndows 98 and I can't find version of update for this OS.
What can I do? Send player to shop?
Greetings from Poland and sorry for my language, I didn't learn English ...

Thank You very much. I contacted with Polish Creative customer-support, and I've ugrade my MuVo - it's work now. )
Sorry for trouble and my language, it's good then someone understand me.
Greetings from Poland!

Problem with power

Similar Messages

Maybe you are looking for