Problem with Premiere always conforming Audio again & again

I've got a problem with premiere CC which is always conforming audios time & again & again. Although this problem is not new in Premiere and I did face it in previous versions. But I've never found a good way to avoid it, especially when I work with much heavier clips or with some formats like mpeg or mov....
What should I do? Is that a network issue?
Thanks, Jim.

No Antivirus.
Audio is 5.1 audio from the video AVCHD, and music tracks are mp3 files.
Hardware: Intel i7 970 hex core processor, system drive (C:) 600GB 7500rpm, data drive (F:) where audio and video files are stored 10000rpm 500GB velociraptor, NVidia GTX 470 video card.

Similar Messages

I keep getting "There's a problem with Adobe Acrobat, please try again" pop-up messages.

I keep getting pop up's that say "There's a problem with Adobe Acrobat, please try again". I'm trying to work and can't open any .pdf files. I bought the conversion service yesterday and today today nothing works.
Help!

Hi Karen,
The error message you mentioned doesn't have anything to do with ExportPDF as Acrobat and ExportPDF aren't connected in any way.
Could you try the steps outlined in our Getting Started guide: http://forums.adobe.com/docs/DOC-2412
Let us know how it goes.
-David

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

Hi!
I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

Hi:
See if this driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

Problem with premiere elements 4.0

i am having
problem
with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps

I have 64 bit windows 7 and CS4 Production Premium. I have a problem with Premiere Pro CS4, it keeps freezing and Crashing. A simple thing like leaving the project idle for about 15 minutes, you come back and find that it has frozen. Also if you drag out a clip on the timeline you will find that the whole application freezes. Any possible solutions would be much appreciated.

Could be several factors at play here. This ARTICLE might give you some tips on getting your computer ready for an editing session. Note that there are some added tips on Win7, thanks to Black Viper, near the end.
If nothing is helping, then the tips in this ARTICLE might help you find some clues amongst the breadcrumbs left behind with a hang, or crash.
The link in this ARTICLE will give you some general troubleshooting tips.
If nothing improves, then please post back with more details. This ARTICLE will give you tips on what would be helpful.
Good luck,
Hunt

Problems with premiere Cs5.5

I am having more and more problems with premiere CS5.5... I am running it on a windows base system. It freezes all the time and now I am not able to render... can someone, please, enlight me why? I am not using creative cloud, just the old set up... thank

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

Problems with "Read" mail becoming "Unread" again

Now that I have upgraded to Mountain Lion, I find my mail app acting odd. When I read an email, or when I select the entire contents of a folder and mark all the mail as "read", within a few minutes, random emails become "unread" again.
Anyone else experiencing this and have you come up with any fixes?
Thanks
Gary Cascio

Mail 2.x has always had these kind of problems with some IMAP servers. A few weeks before releasing the Mac OS X 10.4.7 Update, Apple made some changes to .Mac that caused these issues to happen there as well, and these forums were flooded with complaints from .Mac users about read messages being marked unread, and deleted messages being undeleted.
If this was a non-Mac IMAP account, I would say there is nothing you can do about it other than switching to another mail client. But in you case there has to be something else going on.
Try rebuilding the mailbox, i.e. select it and do Mailbox > Rebuild and see whether that makes a difference.

I'm in iphoto loop with Facebook that says there's a problem with IPhoto uploader. Try again later" It's an eternal loop and no matter what it puts me back to Setup to publish IPHOTO every time and then will not publish.

I'm in an Iphoto loop with iPhoto uploader error and Facebook. I cannot post to Facebook as it sends me back to setup again and then says there is an error with iPhoto uploader. "Try again later" This has been going on since I joined Facebook. Cannot figure out what to do

have you tried posting this question in the iPhoto forum? https://discussions.apple.com/community/ilife/iphoto

Problems with Premiere Pro 2.0: sound lost after clip pasting

To integrate small projects to one bigger Project, it used to work well with Premiere Pro 1.5 in the following way: import small projects into the main sequence of the new project and, in parallel, copy the clips from the timeline of the small projects and past them into the timeline of the new project. However, I am encountering the following problems while trying to do the same thing with Premiere Pro 2.0:
·        Video and sound of every pasted clip becomes unlinked.
·        Although the sound was there (also shows in the wave view) right after the pasting and it can be rendered, but the audio Information gets lost as soon as I exit the new project (saved beforehand). If I re-open this new project, although the timeline shows all the pasted sound clips, but there is information in them - no sound (the wave views show only straight lines).
·        As well, some of the video and audio effect settings get lost (e.g. cross fading), but the effects such as brightness and contrast settings always remain.
·        At least one thing seems to be sure: the imported files themselves are ok. Newly created clips in the timeline from those imported files (dragged into the timeline) are fine - no information lost.
All tips are great helps. Thanks in advance.

I got it!
Though not described in the English HELP, but in the German HELP: I have to press the Shift and T Keys. It works in my case with the following steps:
1.     Mark the corresponding audio and video tracks
2.     Put CTI over the clip
3.     Press shift + T
4.     Double click the clip
5.     Eventually I have to repeat and press the keys shift +T again.
Thanks a lot once more for all of the hints and the detailed explanations. It is indeed a great help. I really appreciate it very much.
tryerlu

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Odd problem with iPhoto always seeing my iPhone as connected when not

I have started having a problem with iPhoto8. When it starts it always goes to the import photos screen and has a couple dozen icons (with no image) and filenames to import from my iPhone. The problem is my iPhone is not connected. It shows up as mounted on the left side of iPhoto. I can right click and unmount it and it goes away, but next time I restart iPhoto it is there again. If I try and click Import all it goes through the motions and asks to delete the originals, I select yes. Then it displays an error dialog with all the filenames listed saying they are corrupt or blank (which I would expect because my phone is not connected).
Does anyone know why it thinks my phone is connected when it is not or what to do?
- James

Do you have wifi sync enabled for those devices?
Select the device, click the Summary tab.
If it is enabled, there's no need to eject the device, even with the cable plugged in.

Problem with Premiere Pro CS5 project files bloating

Has anyone had the same problem that we're experiencing? - we have Production Premium CS5 installed on a machine with Win 7 Pro x64. We have three separate edits all of which are experiencing bloating of the .prproj project file. Often this bloating seems to occur when no importing of assets has occured, just changes in the edits. A project which started at 5mb has bloated to 1.5GB and we can no longer save it. Another project has bloated to 200mb and continues to grow in size. We have not brought in any weird assets, although we are using hi-def footage.
We upgrade from CS3 and never had this problem using Premiere CS3.
We can't fix the problem by 'remove unused footage' as this doesn't reduce the project size, although it does remove the unused footage.
We can't fix it by importing the project into a new clean project as the problem and huge file size just comes with
We can't fix it by using the project manager to collect up the project as it requires to save before collecting and the problem files can't be saved.
A couple of points to note - these projects were originally on Premiere CS3 and were upgraded to CS5. The footage is either Sony EX3 or Canon 5D - both HD.
The machine it's running on has 8gb of RAM.
Currently the projects I'm working on are gradually grinding to a hold with no way to make the files usable again.
Any suggestions are greatfully recieved as I'm at a loss. I've reported this to Adobe, and will report back if I get anything useful.
thanks.

natswilson wrote:
TClark,
I'm shocked that you are having the same problem on a mac. This seems to suggest a problem that could be really widespread. You've also beaten my 1.5GB file bloat size.
What the hell is going on with Premiere Pro? I'm surprised to have heard nothing from Adobe either via my support request or on this forum, save for Jeremys useful work around, considering how serious an issue this is.
I've had to break all the projects I'm working on which have multiple timelines in each project into a new seperate project per timeline in order to reduce the file bloat problem and reduce the risk of me loosing all my work in one go on a bloated file.
Adobe - we could do with some help here. It's frustrating to have spent so much money on licences for this software only to have virtually non-existant help when a serious flaw in the software manifests itself.
Nat
Yeah...it's really a bummer that no one is acknowledging it. It's pretty serious!
I hope Dennis jumps in soon!

Major problems with Premiere CS4

Hello there!
I'm having major problems with CS4. I recently bought a new computer - essentials are as follows:
Intel Core i7 920 2.66GHz
2 x Kingston 3x2GB, DDR3 1333MHz (=12 GB RAM)
Ati Radeon HD 5770 v2
Asus P6T SE, LGA1366, X58, DDR3, ATX
2 x 500GB, Barracuda 7200.12 (RAID1), system disk
2 x 1TB Barracuda 7200.12, media disks
Windows 7 Pro 64 bit
Adobe CS4 Production Premium + latest updates
The problem I have has mostly to do with Premiere although I think the rest of Production Premium softwares should be running better on this computer as well.
For starters, I was highly disappointed when I couldn't view a single HD clip from the Premiere timeline (it was an .m2ts rip from a previously self-burned Bluray disc) at all. Rendering is very slow and even after that the video doesn't run normally, showing just a few individual frames per second. When I point the timeline at a certain spot, it takes many seconds until even that very frame is shown in the monitor window.
And this is not all - I decided to try with a basic DV AVI clip, previously captured with my PPro 1.5 on my earlier computer (3.2ghz Pentium from 2005). It's a native file so it doesn't even need rendering and still the same problem occurs. With normal playback only about 6-10 frames are shown per second. It's absolutely ridiculous - even my 2004 laptop runs DV AVIs more smoothly with PPro 1.5.
While I'm running the Premiere, the level of used RAM comes only up to around 24 percents. The processor, then again, comes close to a hundred when play is pressed on the timeline.
I haven't had such immense problems with other Production Premium softwares (though as I said, I think they should be running faster as well). Otherwise the computer is running smoothly.
A friend of mine pointed out that the graphics card I'm using isn't on the Adobe website's list of supported ones with Premiere, but afaik it shouldn't even be a graphics card problem with this high-end machinery.
So - I sure could use some help and ideas about how to get the Premiere working. My main intention for buying a new computer and Adobe CS4 Production Premium was to start HD editing after all! Thanks beforehand!

Hi
Yeah, I hope he solves problem and knows how it got solved and tells us all...it's like being a detective ! " Mr Plum did it in the "svchost" room ! "
I got a little lost on this....
You are welcome and I'm glad that it paid off so nicely for you. One more suggestion, if I may: I'm a big fan of a fixed pagefile size. When making a fresh install of Windows, one of my first actions is to set a fixed pagefile on a different disk (min=max) before installing anything else on that different disk and removing the pagefile on the C drive. This will ensure that the pagefile in on the fastest part of the drive and will never be fragmented.
I think it used to be that I made swapfiles, or swapdisks which now seems to be called pagefile. That in itself is a little confusing semantic wise, because of the use of mempage stuff. It used to be that base memory was 640k, with the upper memory (to make up 1024 kb) was mostly for drivers and stuff. If more memory was needed than 640k (an event the inventor never thought possible... "who could want more than the enormous amount of 640K ?", he said..)..the extended and expanded memory got invented to swap memory pages from that 640k as needed with the rest of RAM. That's basically correct right ? Sooooo, I don't know if that still goes on, but I suspect it does, unless someone totally changes the architecture of the computer and cpu and fsb and everything... but I don't know what is going on nowadays. Anyway, there were other ways besides windows OS to create virtual memory on the hard drive, and Photoshop was one of the programs that could do that, I think.
Why MS would want to call the swapdisk virtual memory "pagefile" is beyond me.
Anyway, be that as it may, I understand that making the pagefile first on a drive so it's close to the center of the drive (heads don't have to travel far to access). But I haven't added a lot of drives to a system before, and I suspect I will be pretty soon...and this is the part I don't get...
You add drives and put OS on them? So they are bootable ? I've added a drive or two but just formatted and used as more storage but didn't put OS on them. So that part is confusing...
Then you take the pagefile off the C: drive ? Are you then using the new drive as your boot drive and the C: drive is too full to use accept to run the programs already installed ?
Thanks again !
Rod

Problem with Premiere always conforming Audio again & again

Similar Messages

Maybe you are looking for