Problem with Presenter Mobile (with an LMS)

I'm trying to view a Presenter presentation using the Adobe Presenter Mobile app. The presentation has been loaded into a Learning Management System (Desire2Learn) and it works fine on a computer. It won't load on the iPad. It just shows the introduction screen with the loading symbol circling.

Hi,
Could you please share me the link to the course you uploaded on the LMS.
You may mail me at [email protected]
Also, you need to give the link of the course in the browser on ipad and not directly on the Presenter mobile app.
Thanks,
Alpi

Similar Messages

Problems with CiscoWorks LMS 4.0

Dear Technical Support Staff,
We encounter some problems with the application Cisco Works LMS 4.0 , installed in OS Windows Server 2008R2 64 bit Standart Edition with the usage of a patch CiscoWorks_LMS_4.0.x_WIN2K8_R2.
A brief explanation of our network - it consists of VTP domain of the 3rd version, in the layer of the core
2x6509 whish are being operated in VSS (all the configuration is based on them : Vlans, routing, acl list), in the access layer the switches 3750 (some of them are operated in the stack), DNS server is absent, to register the devices in the application we put the title of the device into the host file of the server.
Screenshots are added to the list of problems.
1. IP addresses of the end hosts in the section User tracking are not displayed, in the site cisco.com there is a manual on solving the given problem for the other OSes.
2. Switches 3750 in the section Ciscoview are not displayed, however in the section device update in the list of the installed packages those devices are present, also it is impossible to set (update) the package cisco view for the required device. We have downloaded those packages individually but in the process of installing them locally or from Cisco.com, the application displays an error.
3. It is necessary to see loading of the interface (channel) in the current moment since as far as I remember it is possible to do through MiniRmon, having preliminary setting of all the required interfaces, but I can't set them and the application displays an error. Maybe I am wrong somewhere please correct me if necessary.
4. Where can I find a full description of the Faults.
5. Not from all the devices collections of configurations take place though settings of Telnet and the name Community are everywhere the same.
6. In the section Topology in the scheme of the network those changes do not happen at once? for instance if some device is switched off so in the scheme it does not get red immediately and the same situation with the opposite when the device is available and being pinged so it does not get green. Is it possible to set it the way so the changes occur simultaneously? The messages on failures come in time how can I set it?
Regards,
Alexey Sokolov

Dmirty, try to do a
net stop crmdmgtd
net start crmdmgtd
This normally resolves the issue for me
Did you restart the daemon manager for a device package update?
I have see this a number of times
Cheers,
Michel

Problem with beckup LMS 3.1

hello, somebody can tell me why I did not make cisco works plus beckup?
Folder of beckup I always find a file called beckup.lock
If the gate when I make my next beckup regenerates the same file beckup.lock and I can not do beckup.
in the error log it says this:[Wed Nov 25 21:44:31 2009] Validation C: / TESTBA ~ 1/AUTOMA ~ 1/CMFBAC ~ 1 \ 0 \ dfm \ database \ dfmInv.db failed.
SQL Anywhere Command File Hiding Utility Version 10.0.1.3694
SQL Anywhere Backup Utility Version 10.0.1.3694
(686 of 684 pages, 100% complete)
Database backup completed
SQL Anywhere Command File Hiding Utility Version 10.0.1.3694
SQL Anywhere Validation Utility Version 10.0.1.3694
VALIDATE TABLE "dbo". "EXCLUDEOBJECT"
VALIDATE TABLE "dbo". "Ix_consultant_affected_columns"
VALIDATE TABLE "dbo". "Ix_consultant_index"
VALIDATE TABLE "dbo". "Ix_consultant_ixcol"
VALIDATE TABLE "dbo". "Ix_consultant_log"
VALIDATE TABLE "dbo". "Ix_consultant_master"
VALIDATE TABLE "dbo". "Ix_consultant_query_index"
VALIDATE TABLE "dbo". "Ix_consultant_query_phase"
VALIDATE TABLE "dbo". "Ix_consultant_query_text"
VALIDATE TABLE "dbo". "Jdbc_function_escapes"
VALIDATE TABLE "dbo". "Migrate_remote_fks_list"
VALIDATE TABLE "dbo". "Migrate_remote_table_list"
VALIDATE TABLE "dbo". "Migrate_sql_defn"
VALIDATE TABLE "dbo". "RowGenerator"
VALIDATE TABLE "dbo". "Sa_diagnostic_auxiliary_catalog"
VALIDATE TABLE "dbo". "Sa_diagnostic_blocking"
VALIDATE TABLE "dbo". "Sa_diagnostic_cachecontents"
VALIDATE TABLE "dbo". "Sa_diagnostic_connection"
VALIDATE TABLE "dbo". "Sa_diagnostic_cursor"
VALIDATE TABLE "dbo". "Sa_diagnostic_deadlock"
VALIDATE TABLE "dbo". "Sa_diagnostic_hostvariable"
VALIDATE TABLE "dbo". "Sa_diagnostic_internalvariable"
VALIDATE TABLE "dbo". "Sa_diagnostic_optblock"
VALIDATE TABLE "dbo". "Sa_diagnostic_optjoinstrategy"
VALIDATE TABLE "dbo". "Sa_diagnostic_optorder"
VALIDATE TABLE "dbo". "Sa_diagnostic_optquantifier"
VALIDATE TABLE "dbo". "Sa_diagnostic_optrewrite"
VALIDATE TABLE "dbo". "Sa_diagnostic_query"
VALIDATE TABLE "dbo". "Sa_diagnostic_request"
VALIDATE TABLE "dbo". "Sa_diagnostic_statement"
VALIDATE TABLE "dbo". "Sa_diagnostic_statistics"
VALIDATE TABLE "dbo". "Sa_diagnostic_tracing_level"
VALIDATE TABLE "dbo". "Spt_collation_map"
VALIDATE TABLE "dbo". "Spt_jdatatype_info"
VALIDATE TABLE "dbo". "Spt_jdbc_conversion"
VALIDATE TABLE "dbo". "Spt_jtext"
VALIDATE TABLE "dbo". "Spt_mda"
VALIDATE TABLE "itemInvUser". "DbVersion"
VALIDATE TABLE "itemInvUser". "DbVersionHistory"
VALIDATE TABLE "itemInvUser". "DCRDeviceFilter"
VALIDATE TABLE "itemInvUser". "DeviceTable"
VALIDATE TABLE "itemInvUser". "Event_set_table"
VALIDATE TABLE "itemInvUser". "NOS_DbVersion"
VALIDATE TABLE "itemInvUser". "NOS_NEW_DeviceDetailTable"
4 errors reported
SQL error (-85) - Communication error
SQL error (-101) - Not connected to a database
SQL error (-101) - Not connected to a database
SQL error (-101) - Not connected to a database
[Wed Nov 25 21:46:06 2009] Validation C: / TESTBA ~ 1/AUTOMA ~ 1/CMFBAC ~ 1 \ 0 \ dfm \ database \ dfmInv.db failed.
[Wed Nov 25 21:46:06 2009] Validation C: / TESTBA ~ 1/AUTOMA ~ 1/CMFBAC ~ 1 \ 0 \ dfm \ database \ dfmInv.db failed.
[Wed Nov 25 21:46:06 2009] ERROR (1101): Database backup failed dfmInvDb and. Check the log file for information.
[Wed Nov 25 21:46:06 2009] Backup failed: 2009/11/25 21:46:06
How can I fix?
Thanks so much.

you specify the log tells me this error:
SQL Anywhere Command File Hiding Utility Version 10.0.1.3694
SQL Anywhere Validation Utility Version 10.0.1.3694
SQL error (-832) - Connection error: Found server but communication error occurred
SQL error (-832) - Connection error: Found server but communication error occurred
[Mon Jan 18 00:32:28 2010] Validation E: / \ 0 \ dfm \ database \ dfmInv.db failed.
[Mon Jan 18 00:32:28 2010] Validation E: / \ 0 \ dfm \ database \ dfmInv.db failed.
[Mon Jan 18 00:32:28 2010] ERROR (1101): Database backup failed dfmInvDb and. Check the log file for information.
[Mon Jan 18 00:32:28 2010] Backup failed: 2010/01/18 00:32:28
Although the gate beckup.lock file when you restart the backup creates the file again backup.lock and I can not complete the backup.
The thing I do not understand the log that I've written on this item is: "SQL error (-832) - Connection error: Found server but communication error occurred"
What could stop the backup?
Thank you very much.

Software Distribution - Problem with 1921 Routers

Hello everybody,
we are having some weird troubles in our Cisco LMS 4.2
A Software Distribution works fine for all kinds of our Routers, except the 1921 models. We are using SCP and SSH for the Image distribution and the exactly same configuration on a 1841 and a 1921 works on the 1841 Router but on the 1921 not.
I didn't found any Bugs related to this, maybe it's a problem with the lms settings?
Done so far:
- Deleted the device in LMS, added it via discovery and manually, no change here
- Tried with different IOS versions, no change here, no one will work
- Set the credentials after adding the device again, to make sure they are valid
When creating a new distribution job, we get this error at Step 3 of 5 only at the 1921 Router, so I guess this might be the problem:
Warning
- SWIM1056: The method to update the software on the selected storage device is unknown.
Select a different Flash partition, if available.
I attached a SWIM_debug logfile from a failed job. (changed all the DNS names do XXXDNSNAMEXXX).
Thanks for your help

More than USB it could be SCP. There is a know bug for SCP on 19xx router :
CSCuc98074 LMS 4.2.2 Software Image Distribution fails with SCP on 1921 routers
Just try to change SCP to other protocol and see it that works. Make sure you have all device packages updated for LMS.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

I'm having problems with quizzes in Adobe Presenter 10

I'm having problems with quizzes in Adobe Presenter 10, upon publishing, the text just disappears and the buttons look weird, also the text on submit buttons doesn't show?

I created a dummy test project with one slide and two quiz questions. I uploaded to a Connect 9 server for AICC testing.
Publishing as SCORM, running in IE8 gets the following results:
Publishing as SWF gets me the following errors:
          Webpage error details
          User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
          Timestamp: Mon, 11 May 2015 20:53:59 UTC
          Message: Expected identifier, string or number
          Line: 101
          Char: 5
          Code: 0
          URI:<REDACTED>/data/html/presenter.libs.js
After I close this error, my LMS just churns trying to load SCORM.htm.
Publishing as Both gets me the following errors:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
Timestamp: Mon, 11 May 2015 21:07:30 UTC
Message: Expected identifier, string or number
Line: 1
Char: 467
Code: 0
URI: <REDACTED>/data/html/Project.js
          Webpage error details
          User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
          Timestamp: Mon, 11 May 2015 20:53:59 UTC
          Message: Expected identifier, string or number
          Line: 101
          Char: 5
          Code: 0
          URI:<REDACTED>/data/html/presenter.libs.js
After this error I get an object expected error on the "loadPrContent()" function in the SCORM_utilities.js.
After that it's just a blank page.
Publishing AICC to a Connect 9 server, publish as BOTH, Accessing in IE8 gets the following results:
               Webpage error details
               User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
               Timestamp: Tue, 12 May 2015 19:19:45 UTC
               Message: Expected identifier, string or number
               Line: 1
               Char: 394
               Code: 0
               URI:<redacted>/output/data/html/Project.js
               Webpage error details
               User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
               Timestamp: Tue, 12 May 2015 19:21:49 UTC
               Message: Expected identifier, string or number
               Line: 101
               Char: 5
               Code: 0
               URI: <redacted>/output/data/html/presenter.libs.js
               Webpage error details
               User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
               Timestamp: Tue, 12 May 2015 19:23:00 UTC
               Message: Syntax error
               Line: 1
               Char: 1
               Code: 0
               URI: <redacted>/output/data/resources/ha/wr_/OpenAjaxManagedHub-all.js
After closing the final error message, I get a blank screen.

Problems with Captivate 5, LMS, and AS3

I recently acquired Captivate 5 and I am having difficulty getting it to work with our LMS (Plateau). When I publish a presentation to AICC using Captivate 5, and try to load it in the LMS, it doesn't get past the loading page. I've tried it with an existing course, and I've tried making a simple (3 slides with a text box) new presentation in Captivate 5 and I have the same problem. However, the .swf and .htm files load fine when viewed directly. It's only when run through the LMS that I have a problem.
I was able to reproduce the problem with Captivate 4 by publishing to ActionScript3. It worked fine when I used AS2. Unfortunately, Captivate 5 doesn't allow publishing to AS2, so I'm at a loss of how to address this.
Any suggestions? Is anybody else experiencing this problem?

What brand is your LMS? (What manufacturer)
What versions of SCORM does it support?
What version of ActionScript does your LMS support? AS2 or AS3?
Have you tried uploading a short Captivate 5 lesson with only a few slides and one or two questions (example: True False question)?
If you have Captivate 3 or 4, have you tried uploading a lesson in AS2 to see if your LMS accepts it?
We need more information than just saying: Course not work.
Test first on very simple short lessons to make sure the LMS will accept Captivate 5 content at all. If it will play simple content, try more complex content.
Your issue could be caused by some component or object in the course, or it could be some issue with the LMS. At this stage we do not know the cause, but it can often be determined by testing with simple projects first and then adding complexity until something breaks.

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

SSO problem on Windows Mobile with WAS Java 7.0 and R/3 4.7

We have a curious single sign-on problem with custom WM-app.
The application is developed using WD Java and currently runs on WAS 7.0 SPS10. WAS makes calls to several RFC:s on 4.7 Enterprise and authentication is done using SSO.
The enduser device is a handheld running Windows Mobile and the browser is a vendor (HHP) provided Mobile IE based HandHeldWeb. Because of the poor usability of the default login on handhelds we created a custom J2EE Web Application JSP which does the login to the WM-app.
On a PC browser everything functions normally, but occasionally with the mobile device no data from R/3 is displayed. As if SSO didn't work. Sometimes, if transaction 1 doesn't work and the user comes out of it, then runs transaction 2 which makes an RFC call and then returns to transaction 1 it works. Sometimes..
This problem does not occur on mobile device when the default login is used. And as stated previously, on a PC the custom login works fine.
-Erno

Hi,
Currently SAP is selling the Software in Business Suite .
If you are purchasing the SRM 7.0 .It will come as Business suite . It will contain
1. SRM 7.0
2.CRM
3.PLM
4.SCM
5. ECC 6.0 wiht Eph 4
When you are getting the ECC 6.0 in this package why to use SAP R/3- 4.6C
So better you upgrade both the SRM and R/3.
I would like to know if SRM 7.0 and R/3 4.6C is compatible in first place.Will it work?
It will work but in the long run you will get lot of Problem.Since SRM 7.0 is Based on Webdynpro technology
Regards
G.Ganesh Kumar

Backup problem with LMS 3.0 on Solaris

Hi All,
I'm encountering problems with LMS 3.0 when I try to do a backup. After you hit OK on the window that says "Do you want to backup now?", an error would pop up saying: "Enter a new directory name or ask the system administrator of the Ciscoworks Common Services server to make the directory accessible to user casuser", thus I cannot proceed with the backup process. When I do backup, my login privilege is admin. Even tried to do backup on the same partition as my CSCOpx directory but to no avail.
Appreciate your help on this guys. Our LMS 3.0 runs on Solaris platform. Thanks in advance.

Hi Joe,
Thanks for your prompt response. By the way, what is a casuser? Is he also one of the user that can be found on the Local User Setup on Common Services? The scenario here is that, I am not the one who installed the Ciscoworks LMS 3.0 on the client side, so I am not aware on how they did the installation procedure for the application. I remember assigning casuser password during installation on our other clients that has LMS 3.0.
Will the write access on the backup directory for the casuser be done by the Solaris root administrator?
Thanks for your help.

Mobile Home problem with Magic Triangle

So I have been setting up a magic triangle for the past few days with an OSX Lion server. I believe it is working properly. The server is running OD and is bound to my AD. I have made an OD group which contains my AD users, and I have set that OD group to have limited application preferences (one of them is to block the App store). All my users have MacBook Airs which they will take off-site, so I enabled mobile home folders in the AD bind and in the OD group mobility settings (with confirmation required).
When I tested it today, with Airs running 10.7.4, here is what happened.
When the system was on the network, it would log a user in, ask to create the mobile account, and successfully create it. Once logged in they were limited to the application preferences that I set on the server. I considered this a complete success.
When I disconnected them from the network, I had expected that they would still be able to log in and the system would fuction the same way with the exception that they would not sync their changes until they were back on-site.
Instead...
When the same user trys to log in it says the AD server is unavailable and then logs them in anyway. However, once they are at the desktop, none of the permissions are in place. They can go to the app store, or do anything else they feel like. Once they are back on the network, all the server based preferences reappear and lock the system down.
So my questions are:
1. Should a mobile account based system compain that it cant find the AD domain when offsite?
2. Why is it not checking some cached verison of the permissions and locking down the notebook when offsite? I can tell that it is caching the user name and password (as loging in as a user the air has never seen before will simply give a login error), as it will let them in, but it is not holding any preferences.
3. How can I prevent users from simply disconnecitng from the network to bypass all my server based policies?
Hope someone can help

Hi,
I'm having a similar problem with exactly the same setup, our clients are 10.7.4 wired not wireless the OD server is 10.7.4 and the clients are authenticating via an AD 2008 R2 domain.
We've had this scenario in the past running 10.5 and 10.6 without any problems but with 10.7.4 the clients' MCX settings are lost when they're not connected to our network. It seems to only lose the settings applied to user groups but not computer groups.
At this moment in time I don't have an aswer I'm still looking, have you found a solution?
I know configuration profiles are the way forward and in the future I'll move over to them but they don't seem to work that well with PHD's at the moment.
If anyone has any thought on this it would be much appreciated.
Thanks,
Jay.

Voice problems with Lync 2013 Mobile

Hi
I have a situation where Lync 2013 on both iPhone & Android has started giving problems with making and receiving voice calls. There are no problems with Windows, Mac or Phone Edition clients that I'm aware of. I have not tested anything over the VPN,
but this should not be a factor.
For receiving calls - If the user is connected to the LAN via Wi-Fi AND the call is from an internal user, all works fine. If the call is from an external user OR the user is connected via 3G, then the call just shows "Connecting" indefinitely.
This includes transferred calls.
For making calls - If the user is connected to the LAN via Wi-FI and calls either an internal or external users, all works fine. If the user is connected via 3G and calls either an internal or external user, the phone rings, but when it's answered it shows
call ended.
I have ran RUCT on a computer outside the network, with the following findings:
DNS:
Record
Type
Hostname
IP Address
Port
Weight
Priority
_sip._tls.domain.com
SRV
sip.domain.com
Edge External IP
443
100
0
sip.domain.com
A
sip.domain.com
Edge External IP
sipexternal.domain.com
A
sipexternal.domain.com
Edge External IP
meet.domain.com
A
meet.domain.com
<null>
_ntp._udp.domain.com
SRV
pool.ntp.org
NTP Server IP
123
100
0
_sipfederationtls._tcp.domain.com
SRV
sip.domain.com
Edge External IP
5061
100
0
lyncdiscover.domain.com
A
sip.domain.com
Edge External IP
lyncdiscover.domain.com
CNAME
sip.domain.com
I have ran Test Port on each entry where there is a port with successful results. Ping works on all entries.
If I query Certificate Information on sip.domain.com with port 5061 or 444, it succeeds and returns the certificate with subject sip.domain.com. If I query 443, it fails with error "An error occurred while retrieving the certificate. Unable to read
data from the transport connection: An existing connection was forcibly closed by the remote host."
On Microsoft Remote Connectivity Analyzer, all tests pass except for the certificate test:
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server sip.domain.com on port 443
The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
Running netstat on Lync Edge gives me the following with regards to port 443:
TCP <Internal IP>:443 Lync2:0 LISTENING
TCP <External IP>:443 Lync2:0 LISTENING
Firewall allows connections on port 443 and I've tried disabling the firewall as well. Trying to open https://sip.domain.com in the browser on the Lync Edge fails also, telnet succeeds, but no data is returned.
I've restarted the AV service and also rebooted the Lync Edge server, no change. In the topology builder, I can see that AV is configured to listen on port 443.
Any ideas would be most welcome.
Regards
Lionel
MCP Windows Server MCTS .NET

I have ran a large amount of additional tests. On my latest round of testing, I have obtained the following results:
Call received via PSTN gateway on user DID, answered by desktop client inside LAN - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN - works.
Call received via PSTN gateway on user DID, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call made through PSTN gateway from desktop client inside LAN - works.
Call made through PSTN gateway from desktop client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client inside LAN - does not work.
Call made through PSTN gateway from mobile client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client outside LAN (3G) - does not work.
Call from desktop client inside LAN to desktop or mobile client (regardless of location) - works.
Call from desktop or mobile client (regardless of location) to desktop client inside LAN - works.
Call from desktop or mobile client (regardless of location) to desktop or mobile client (regardless of location) - works.
There is no difference in behaviour between normal calls and conference calls. Reproducing the problem seems to require the following:
1. PSTN gateway needs to be involved
2. One party needs to be on mobile client
3. The mobile client needs to be inside the LAN or on a 3G connection, but not behind NAT on a DSL connection
The only conclusion I can make is that somehow NAT makes the problem go away, but it does not affect desktop clients (on the LAN or Wi-Fi at least, I do not have a way to test them on 3G).
The PSTN gateway (Cisco UCM) could also be the problem, but it works fine in all other cases. It has 4 trunks and makes all kinds of routing decisions, but once a call is routed to/from Lync, it should not make a difference on what type of device it is answered.
I'm really baffled by this one. Perhaps the 3G thing is a service provider issue and the issue on the LAN has something to do with the internal DNS combined with the behaviour of the mobile client. Just not sure exactly what.
MCP Windows Server MCTS .NET

Problem with Request for Permissions (mobile app)

In my application I want to publish the results of the games on facebook. I used this tutorial: http://www.adobe.com/devnet/facebook/articles/flex_fbgraph_pt1.html
Here is a fragment of my source code:
<fx:Script>
        <![CDATA[
            import com.facebook.graph.FacebookMobile;
            import mx.events.Request;
            import valueObjects.GlobalVariables;
            protected var extendedPermissions:Array = ["publish_stream","user_website","user_status","user_about_me"];
           protected function initApp():void
                FacebookMobile.init("app ID",loginHandler);
            protected function loginHandler(success:Object,fail:Object):void
                if(success){
                    currentState="loggedin";
                    nameLbl.text=success.user.name;
                    userImg.source=FacebookMobile.getImageUrl(success.uid,"small");
                    birthdayLbl.text=success.user.birthday;
                    FacebookMobile.api("/me/statuses",getStatusHandler);
                else{
                    this.login();
            protected function login():void
                FacebookMobile.login(loginHandler, stage, []);
            protected function logout():void
                FacebookMobile.logout();
                currentState="loggedout";
            protected function getStatusHandler(result:Object, fail:Object):void
                statusLbl.text=result[0].message;
            protected function submitPost():void
                FacebookMobile.api("/me/feed",submitPostHandler,{message:GlobalVariables.d.toString()}, "POST");
            protected function submitPostHandler(result:Object,fail:Object):void
                FacebookMobile.api("/me/statuses",getStatusHandler);
        ]]>
    </fx:Script>
I have problem with permissions. After login I see a white screen instead of request for permission. The desktop application does not have a problem with it. When I log for the first time to the desktop application and I will give the permissions applications, then in the mobile application everything works fine. But this is not a good solution. And so please help.

The labelField of IconItemRenderer only supports single line text. Try using the messageField instead:
<s:List width="200" height="200">
    <s:dataProvider>
        <s:ArrayList>
            <s:DataItem desc="1 Hello World Hello World Hello World" />
            <s:DataItem desc="2 Hello World Hello World Hello World" />
            <s:DataItem desc="3 Hello World Hello World Hello World" />
        </s:ArrayList>
    </s:dataProvider>
    <s:itemRenderer>
        <fx:Component>
            <s:IconItemRenderer labelField="" messageField="desc">
            </s:IconItemRenderer>
        </fx:Component>
    </s:itemRenderer>
</s:List>
If you need more control you might need to subclass, this post might help: http://flexponential.com/2011/08/21/adding-multiline-text-support-to-labelitemrenderer/

HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Problem with Presenter Mobile (with an LMS)

Similar Messages

Maybe you are looking for