Problem with print pdf and ordering book

Hi,
the function save as pdf, or print pdf, seems not working anymore: the pdf extracted in fact is empty (white pages). I have tried it on several books project, including some I had printed previously, with the same result. Any idea of the possible reason and how to fix it?
Also, if I try to order the book, my photo are visible (at least the cover) but I can't preview the whole book. And, when I try to purchase it, I've an error message saying that there is not enough memory for the book, please quit aperture and try again (tried, but no results).
Also, even more strange: I downloaded the latest update package, and when I launch it an error message appears that says "Aperture 3 or later version must be installed"... but I have version 3.1.1! So...
Can somebody please help?
Many thanks in advance,
cheers
Francesca
best
Francesca

Have you tried the tips shown at [Aperture 3: Troubleshooting Basics|http://support.apple.com/kb/HT3805] that might help.
Also, even more strange: I downloaded the latest update package, and when I launch it an error message appears that says "Aperture 3 or later version must be installed"... but I have version 3.1.1! So..
For the updates to work Aperture must be installed in the systems Application folder and be named Aperture not Aperture.3.1.1 or anything else. Is that the case in your situation?

Similar Messages

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing pdf

IF POSSIBLE REPLY IN ITALIAN
HI, i ve got a big problem.
i 've to create an A0 page in vectorial pdf, which has connected different files: .psd files for the images with transparency, and vectorial .pdf for the drawings from cad.
When i ve created my page, i export that in print pdf high quality.
1° problem: sometimes it fails and tells me there s not enough memory
2° problem: when print pdf is created, the plotter can t load it to print, it stops at 40% loading.
there s a way to make an easy vectorial print pdf?
using vectorial eps instead of vectorial pdf?
using transparent tiff instead of psd?
THANKS

thank you for the fast reply Peter. Im working on an achitecture poster for my last exam, and it contains vector graphics sometimes overlayed on raster images.
i don t like to use illustrator too, im using 3 programs already to create this poster. do u think .ai are easier than eps???
i ve tryed to save new pdf without layers, but it didn t work. then i ve tryed to change pdf with eps on indesign, and now the print pdf saving is really faster. im gonna try to plot it and then i ll tell u what s changed.
OH most important, i was drag n dropping pdf into indesign, and i read it s really wrong! so now i import vector eps to indesign ...
Plot test...
TY

Troubleshooting problems with printing PDF's from Revit and Cad files

I am unable to print a readable pdf from AutoCad and Revit. Any Suggestions? I do not have problems with Microsoft or Adobe products..Just AutoCad. I have already spoken with my AutoCad dealer and they concluded it was an Adobe issue.

How was the PDF file created? With the Adobe plug-in to AutoCAD?
If you can provide some samples, we could look at the files and determine the problem. And FWIW, I doubt that your AutoCAD dealer has the competence to conclude where the problem is with a PDF file.
- Dov

Pdf reader X has problems with small pdf and printer with post script driver

Hi friends.
I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
Can someone help me please.........are there settings in Reader X who can solve my problem ???
Thank you very much for help!

put ? after rwcgi60.exe

Problem with printing PDFs as 6 slides pr. page.

Hi!
I am having trouble printing PDFs as handouts with 6 slides on one page.
I go through all the settings for the printer, and the print comes out ok, but the slides are printed up side down and in the wrong order.
Even though I have set the order in the printer settings.
Anyone had the same problem?
Hope you can give me some advice.
Regards,
Elisabeth
PS! I do not have access to the original powerpoint presentation, otherwise I know I could print from that file...

Thank you, it worked!
Elisabeth

Problem with Print Preview and Print events

Hello Experts,
We have developed a program, in which, I m trying to display the % values in the Sub Totals and Grand Total lines, The logic and program functionality is performing very well. The report is displaying the output the way end user is willing to see.
The main problem is, the entire % values are going to a toss when we click the Print Preview or trying to print the report, which is not supposed to go that way. I have even tried to debug the program where the problem is evolving in the code, but it is not raised from the code.
Please refer to the screen shots.Before clicking the Print Preview and after clicking the print preview.
Do anybody face the same kind of problem ever?
If so please let me know what could be the best possible solution.
Thanks & Regards
Harish Kumar MK

Hi Harish,
I have use the below code but not for percentage... I think for percentage you just have to calculate the normal percentage and replace it with a subtotal value.
This is not your complete code it will be better if you mail your complete code so that i can debug and check.
   TABLES: vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_layout   = ls_layout
      it_fieldcat = lt_fieldcat
      it_sort     = lt_sort
    TABLES
      t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
BR
Sumeet

Problems with itunes library and order of tracks

Hello,
I downloaded the new update, and I'm having a problem with my library when accessed from the browser. Before itunes 7, my tracks were in order that they appeared on the album, now they are in alphabetical order. Is there a way to make it go back the way it was before the update--in order by track number?
thanks.
chris

I was having the same problem and I knew there had to be an easy answer. I knew it for sure when I saw your topic unanswered. Just right click, or control click on the bar where it says name, album, genre, etc. and select "track number," this will give you the option to put them in their original order.
You can also access this under "view options" in the view pull down menu.
emac, mini, QS G4, ibook, etc. Mac OS X (10.4.7)

Problems with Xtra pdf and V12

I use Director MX and XTRAS INM PDFXtra and V12-DBE. I create a movie with database V12 and search engine V12-DBE. I use PDF-XTRA behaviors to open pdf file.
When I read my projection, I have error messages : « la mémoire ne peut être read » with Windows XP or « Cannot find acrobat reader ActiveX control »with VISTA. I try to upgrade Xtra but INM Support don’t answer me.
I look for an other product easier to used because I don’t need all functions of Director.
Please, help me. Thanks
(the same in french ) Je fais de l’archivage électronique de documents en utilisant DIRECTOR MX avec les XTRAS INM PDFXtra et V12-DBE.. Je fais une animation Director dans lequel j’intègre une base de donnée V12 et un moteur de recherche qui est réalisé avec V12-DBE. - J’utilise également PDF-XTRA Behaviors qui me permet d’ouvrir les fichiers pdf dont le chemin d’accès est mentionné sur la base de données V12. - Je recherche une méthode plus simple pour réaliser mes projections (peut-être un autre produit que Director). J’utilise en effet peu de fonction de Director. J’ai uniquement besoin de créer des menus, une base de données et pdf. J’ai quelques soucis avec des messages d’erreur sur les projections (« la mémoire ne peut être read » lorsque je lis l’animation sur Windows XP ou le message- « Cannot find acrobat reader ActiveX control » lorsque je suis sur VISTA).

The PDF xtra requires that the user has Acrobat Reader installed on their machine. The xtra will not work if it is not there. The ActiveX control should get installed when you install the Acrobat Reader.
You would probably have better luck using INM's Impressario which does not require the Acrobat Reader to be installed.

Problem with printing pdf file created from Illustrator

Hello,
In a drawing I created with Illustrator 10.0.3 I covered part of a circle with a white rectangle (to make it disappear). I saved it as pdf. When printing the pdf (under Linux with a HP printer), the covered part reappeared. However the pdf-file is how it should be. Anybody knows what the problem is?

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problems with Writable PDFs and MACS - content not viewable unless clicked on

I am having problems viewing documents in Adobe Reader 9. Students are downloading a writable PDF from our system, saving it with content, then uploading it back to the system. All Mac users' documents are coming back blank unless clicked on. For some reason, all Mac PDF's are appearing blank until each individual field is clicked on. Once you click a field, the information shows up until you click another field then the information disappears in the old field and shows up in the new field.
We really need to be able to view and print these documents so if anyone knows of a quick fix please let me know! We are trying to print all of the applications tomorrow.

This is due to Apple's improper handling of pdf files with its Preview Application. This will not happen if your users use Adobe Reader. You can find a fix for individual files here: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

Problem with Create PDF and linked data

Using Acrobat X standard.
I have a Word 2010 doc with links to Visio and Excel data.
When using the CreatePDF option from Word, I consistently get a prompt asking whether I want to update the linked data before creating pdf. I would like to either (1) turn this prompt off or (2) -- less preferable -- have the linked data always update without prompting.
Is thre a setting that would accomplish one of these two solutions?
Thanks,
Craig
PS. All settings in Word have been set such that data IS NOT updated when printing on a regular printer.

You can print to Adobe PDF.

Display problems with print commands and options

What fonts are required to be installed in windows for Reader X to display all of its component parts? My fonts were cleaned out and now the print selection screen only displays a blank image with no letters or buttons. It would be nice not to have to reinstall 1000 fonts just to find the right ones.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

Problem with printing pdf file HP 845c windows 7

When I am printing a pdf file it is not printed well, the ink is grey and it is difficult to read.

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problem with print pdf and ordering book

Similar Messages

Maybe you are looking for