Problem with printing 6x4 from Photoshop CS5 to Epson 2880

Hi,
bit of an odd one. I can print A3 and A4 no problem, but when I try to print a 6 x 4 it looks like the printer is not reconising the size of the paper. It prints the image the right size, but as though it were printing it on a larger sheet of paper, in the left hand side with a a 5cm space to the right (which is actually the top of the image).
I have set the printer to 6 x 4 for both image and paper.
Any ideas?
Thanks

I have an Epson 2200, but am assuming the drivers and print dialog accesing that driver and ICC profiles are very similar to Epson's 2880, which is the same size as the 2200.
In order to print 6 x 4, whish isn't a standard page size in the print dialogs, are you setting up a custom page size? (Print > Print Settings > Page Size > Manage Custom Sizes) - This works fine here, but if the paper is the wrong size, it won't print. The print driver requires that the paper size actually be 6 x 4.
Of course, an alternative approach might be to print on a standard paper size, maybe adding trim marks, and then cutting the page down to 6 x 4 after printing.
If none of this helps, I suggest you contact Epson's tech support.

Similar Messages

Printing PDFs from Photoshop CS5 creates unworkable miniature files

I work on Photoshop CS5 files and print them to pdf all day long with no trouble, most of the time. Occasionally however I complete a file in Photoshop and print to pdf and the file outputs as some kind of completely unworkable miniature. Very small file that fits in a tiny corner of the canvas size it should occupy. Once this occurs I must reboot my computer 3-4 times before the print to pdf features returns to normal function. Today this happened on two separate computers almost simultaneously after I switched over from one to the other to get this job out and it occurred to me it might have been the actual file I was working with. Corrupt or something. The I tested some files that had worked in the past and they too went "miniature". When this happens I save as pdf just to get the job out. While this works, the saved pdf is always a much larger file than the printed pdf version, with completely similar resolution quality. I love my print pdf feature, but it seems to have developed a little occasional psychosis in version CS5 and I was wondering if anyone has a fix up their sleeve, or can tell me what setting I am accidentally activating to make the output so tiny. It's pretty frustrating.
Hans Matthes

I advise you to contact Adobe Technical support through phone
or you may also refer the acrobat user forums posted on adobe.com
website

Problem with multiple downloads of photoshop cs5!! help!!

Hi, I have adobe photoshop cs5 which i download from the adobe website. i downloaded it on my laptop, which has since stopped working properly. so i deactivated it permanently like a website said i should. i already have creative cloud on my new laptop, and I've been using the trial so far. its expired now, so i entered the serial code for my photoshop from my old computer. but it didn't work! it says the number is invalid. even without deactivating my old photoshop it should have worked because you are supposedly allowed 2 downloads on separate computers. why dint it working? what did i do wrong?

CS5 has nothing to do with Creative Cloud. they are separate versions. You need to actually install CS5.
Download CS5 products
Mylenium

Problem With File Crashing in Photoshop CS5

Hello I have a design file that I just created in Photoshop CS5 last night. I went in to do some editing today and it keeps craahing within a few seconds of being opened. I have never had this problem with a file before and I need it to turn in at work. ANy helpful ideas out there on what may be happening? It's happened at least twenty times now....

If you do a search, you will find several threads dealing with file corruption in CS5/ CS5.1. The long and short of it is, that the file is a goner, but feel free to try things like opening it in another program (Art Rage, Corel Painter, GIMP) or image viewer (XnView, ACDSee) to recover at least parts of it...
Mylenium

Problem with Text tool in Photoshop CS5

I just purchased PCS5 this morning and they told me that I should download the trial version till I get the actual CDs... I have Photoshop CS4 and never had any serious problems. After downloading and installing CS5 it seems everything is working ok... however there are 2 problems...
1. It does not interact with Bridge 4 (when I make changes in Bridge, CS5 does not see it)
2. Any time I try to click on 'TEXT' tool icon, the application crushes... and I cant do anything... I have to restart the application.
Dont care much about 1st problem, but can't do without the 2nd one....
Any ideas?
Thanks a million in advance

Hi
Have you tried following solutions?
- update Photoshop to 12.0.4
- remove bad & duplicated fonts and clear system font caches
- update or uninstall 3rd party font management application
- remove all 3rd party plugins including font management application plugin
- launch Photoshop 32bit mode
- upgrade your Mac OS
If above solutions don't help, please contact me ([email protected]).
Thanks,
Kyoko

Help with printing projects from photoshop elements

I have been trying for a few days now to print a project from my elements 6 program and the colors are way off. I just recently got a new printer, Epson artisan 837. I didn't have this problem with my last printer. The printer prints normal from other programs, and I've tried a ton of different printing settings and I still can't get it. Help please.

In Editor, go to Edit menu>color settings
Check "Always Optimize Colors for Computer Screens".
In the printer settings, check Printer Manages Colors.
The point is that you don't want both PSE and the printer to manage colors.

Problems with print range from 1 to 9999 during printing

Hi All,
In my project i am printing the datas in a JTable by a click of the button.I have used the following link:-
http://developer.java.sun.com/developer/onlineTraining/Programming/JDCBook/advprint.html
to print that data from the JTable.The main problem i have is that
1) The font size in which the tableheader and tabledatas printed are so small.So that i need to increase the font size for both tableheader and tabledatas?
2)When i click the printButton for printing it opens a dialog box showing print range from 1 to 9999. And in the pages from 1 to 9999.
I don't want this.I want only 1 to 1.I know that by using Pageable
interface u can change it.But i don't know how to do it
Any one help me to solve this 2 problems i will be very thankful to u.It is Urgent.For ur reference i will provide my Code:-
import javax.swing.*;
import javax.swing.table.*;
import java.awt.print.*;
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Dimension;
import java.io.*;
public class PrintReportPanels extends JPanel implements Printable
JTable tableView;
String aLine="";
DefaultTableModel model;
Vector columnNames = new Vector();
Vector data = new Vector();
JScrollBar jsb = new JScrollBar(JScrollBar.HORIZONTAL);
JScrollBar jsb1 = new JScrollBar(JScrollBar.VERTICAL);
JPanel southPanel=new JPanel();
JPanel printPanel=new JPanel();
JButton printButton=new JButton();
int v=ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED;
int h=ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
private Font fnt=new Font("Arial",Font.PLAIN,20);//Not working for increasing the font size
public PrintReportPanels()
     try
this.setLayout(new BorderLayout());
UIManager.put("ScrollBar.track",Color.red);
UIManager.put("ScrollBar.thumb",Color.blue);
     FileInputStream fin = new FileInputStream("Spooler.txt");
     BufferedReader br = new BufferedReader(new InputStreamReader(fin));
     // extract column names
     StringTokenizer st1 = new StringTokenizer(br.readLine());
     while( st1.hasMoreTokens() )
     columnNames.addElement(st1.nextToken());
     }               // extract data
     while((aLine = br.readLine())!=null) //br.readLine() which contains the Spooler.txt datas is assigned to aLine
     StringTokenizer st2 = new StringTokenizer(aLine);
     Vector row = new Vector();
     while(st2.hasMoreTokens())
     row.addElement(st2.nextToken());
     data.addElement( row );
     br.close();
     catch (Exception e)
          e.printStackTrace();
model = new DefaultTableModel(data,columnNames);
tableView = new JTable(model);
JScrollPane jsp = new JScrollPane(tableView);
this.add(jsp,BorderLayout.CENTER);
this.add(jsb,BorderLayout.SOUTH);
this.add(jsb1,BorderLayout.EAST);
this.add(southPanel,BorderLayout.SOUTH);
southPanel.setLayout(new FlowLayout());
ImageIcon ic=new ImageIcon("print.gif");
printButton.setIcon(ic);
printButton.setBackground(Color.white);
printPanel.setLayout(new FlowLayout(FlowLayout.LEFT));
printPanel.add(printButton);
southPanel.add(printPanel);
this.validate();
this.repaint();
printButton.addActionListener( new ActionListener(){
public void actionPerformed(ActionEvent evt) {
     PrinterJob pj=PrinterJob.getPrinterJob();
     pj.setPrintable(PrintReportPanels.this);
     pj.printDialog();
     try{
          pj.print();
     }catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat,int pageIndex) throws PrinterException
     Graphics2D g2 = (Graphics2D) g;
     g2.setColor(Color.black);
     g2.setFont(fnt);
     int fontHeight=g2.getFontMetrics().getHeight();
     int fontDesent=g2.getFontMetrics().getDescent();
     //leave room for page number
     double pageHeight = pageFormat.getImageableHeight()-fontHeight;
     double pageWidth = pageFormat.getImageableWidth();
     double tableWidth = (double) tableView.getColumnModel().getTotalColumnWidth();
     double scale = 1;
     if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
     double headerHeightOnPage=
tableView.getTableHeader().getHeight()*scale;
     double tableWidthOnPage=tableWidth*scale;
     double oneRowHeight=(tableView.getRowHeight()+
tableView.getRowMargin())*scale;
     int numRowsOnAPage=
(int)((pageHeight-headerHeightOnPage)/oneRowHeight);
     double pageHeightForTable=oneRowHeight*numRowsOnAPage;
     int totalNumPages= (int)Math.ceil((
(double)tableView.getRowCount())/numRowsOnAPage);
     if(pageIndex>=totalNumPages)
return NO_SUCH_PAGE;
     g2.translate(pageFormat.getImageableX(),
pageFormat.getImageableY());
     g2.drawString("Page: "+(pageIndex+1),(int)pageWidth/2-35, //For printing the page no. at the bottom
(int)(pageHeight+fontHeight-fontDesent));//bottom center
     g2.translate(0f,headerHeightOnPage);
     g2.translate(0f,-pageIndex*pageHeightForTable);
     //If this piece of the table is smaller than the size available,
     //clip to the appropriate bounds.
     if (pageIndex + 1 == totalNumPages)
int lastRowPrinted = numRowsOnAPage * pageIndex;
int numRowsLeft = tableView.getRowCount() - lastRowPrinted;
g2.setClip(0, (int)(pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(oneRowHeight * numRowsLeft));
     //else clip to the entire area available.
     else{
g2.setClip(0, (int)(pageHeightForTable*pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(pageHeightForTable));
     g2.scale(scale,scale);
     tableView.paint(g2);
     g2.scale(1/scale,1/scale);
     g2.translate(0f,pageIndex*pageHeightForTable);
     g2.translate(0f, -headerHeightOnPage);
     g2.setClip(0, 0,(int) Math.ceil(tableWidthOnPage),
(int)Math.ceil(headerHeightOnPage));
     g2.scale(scale,scale);
     tableView.getTableHeader().paint(g2);//paint header at top
     return Printable.PAGE_EXISTS;
public static void main(String[] args)
     JFrame frame=new JFrame();
     RepaintManager.currentManager(frame).setDoubleBufferingEnabled(false);
     JPanel panel=new PrintReportPanels();
     frame.getContentPane().add(panel);
     frame.setSize(800,600);
     frame.setVisible(true);
Pls. do provide the reply and tell me where i go wrong.I will be waiting for ur reply.It is very Urgent.
Thanx,
m.ananthu

Hi conner,
1) My font size problem is over i have used the tablename.setFont(new Font("Arial",Font.PLAIN,20)).It does change the font size of the JTable contents but the JTable Header still remains the same.I want to change the font size of the JTable header as well.How to do it?
2)According to my second problem can u provide the code of how to change the page range from 1 - 9999 to 1-1?So that i will be very thankful to u.
Thanx,
m.ananthu

Printing (not) from Photoshop CC to Epson Stylus Pro 7800

I have a brand new iMac on OS X 10.9.2 and a brand new install of Photoshop CC and printer driver.
When I try to print an image from PS, the file is briefly seen in the print queue and then it disappears, but no printing happens. It gets as far as saying "printing page 1 of 1", but nothing else after that.
The images print fine from Preview and other types of documents also print fine, so it is just from Photoshop where the problem occurs.
Restarting PS and the printer don't make a difference; nor does re-booting the computer.
All help gratefully received!

Contact Epson - they seem to be having a LOT of driver problems on MacOS 10.9.
Photoshop sends the data to the OS, which sends the image data to the driver - and the driver is showing that it has a print job and then losing the job. So this is another Epson driver issue.

Having problem with images imported from photoshop

I am totally new to Fireworks, I am redoing a site that was done using CS2, that is GoLive, Photoshop and Image Ready. I wanted to begin familiarizing myself with Fireworks by starting with using it to make all the web images for the site (jpgs, pngs, etc). It started well but after a while I started getting strange results from FW when I imported PSD files. The PSD imports fine into FW but when I want to "preview" or do a "2-UP" and see what it looks like as a jpg or png I just get a blank image where the jpg or png is supposed to be. However if I "export" the jpg it does get exported, but I would like to preview it to see what the quality is. This doesn't happen every time but at least 50% of the time in the last 2 days, and there seems to be no rhyme or reason behind why it works with some images but not others.
Another thing is that if I add a layer effect to the image such as "inner glow" to the PS image, and then flatten the image to make sure it gets exported to FW, it doesn't get exported. It is as if I never added the layer effect in PS.
Any help on these two issues would be greatly appreciated and help me to continue in perservering with FW.
VL Branko

I don't think I've cracked open Bridge since upgrading to CS5/CS6, and I'm hesitant to start today! I'm therefore kind of assuming that you're starting with PSDs and opening them up in Fireworks. (If you're not doing this, give it a try.)
Regarding the 50% failure of Preview and 2-Up modes, I was thinking that saving the PSDs as native Fireworks PNGs—within Fireworks—might eliminate that problem. It's hard to imagine Fireworks not previewing its own file format, but easier to imagine it failing to properly preview a PSD file. And again, perhaps File > Image Preview might work better for you.
As far as the "inner glow" issue: 1) Be sure to add it into the PSD before importing into Fireworks, and 2) If it doesn't show up, have a look at Filters within the Properties panel for the selected object; you could try selecting Inner Glow within ‘Photoshop Live Effects’ or try out Fireworks' own native Inner Glow filter effect.
Other than for the purpose of familiarizing yourself with Fireworks, you may want to consider why you'd use Fireworks for these graphics, if they were originally created in Photoshop. Small changes in graphic appearance are always possible when moving between applications. For example, Photoshop is color managed whereas Fireworks is not; you therefore might notice a small shift in saturation or tonality between the two applications. Whether this is a concern depends on your final output goals.

Problems with selection marquee in Photoshop CS5.5 on MacBook Pro with Hi-Res Display

A few months ago i bought a 15" MacBook Pro with the hi-res display (not retina display...just the higher res display offered prior to the release of the retina display).
I'm having trouble with Photoshop and selection marquees. In particular, anytime I make a selection while viewing the image at 100% zoom level (so, actual pixels), the "marching ants" selection marquee I draw always shifts over a few pixels after I draw it.
So I'll make a precise rectangular marquee around an object, and it will look right, until I release the button on my mouse. The moment I release the mouse button, the marquee shifts over a few pixels in both directions (vertically and horizontally).
This has never happened on any version of Photoshop or on any Mac I've ever used before (and I've been using Photoshop for a LONG time on LOTS of different Macs), so I can only assume it has something to do with the Hi-Res display. This same version of Photoshop works just fine on my previous MacBook Pro laptop. But after installing it on the new MacBook, immediately - and consistently, every time - it happens.
If I zoom in and use the tool, it doesn't have the problem. It seems to only occur when viewing at 100% (which is usually for me), but it does do it EVERY TIME I use the rectangular marque tool.
It's driving me a little bit batty.
Anyone else?

An update...I had thought to try changing the Open GL settings, but it didn't seem to make any difference. However, I hadn't realized that you need to restart Photoshop for changes made to the Open GL preferences to take effect, so I wasn't actually changing anything.
Turns out, it's an Open GL drawing issue - and disabling it fixes the problem.
Of course, you also lose all of the other enhancements that come from enabling Open GL drawing.
I'm only leaving this discussion up in case anyone else with the same problem stumbles across the issue.

Problems with 'Print Booklet' from InDesign CS4

I am having problems using the 'Print Booklet commane in InDesign CS4. I have done this 100s of time from CS3 with no problems but for some reason it just won't auto duplex (print on both sides of the paper) when I do it from CS4. USing exactly the same settings, computer and file. The printer is setup correctly as will print double-sided automatically from other apps. Using mac leopard. Any ideas?

Unfortunately, I have tried this. I choose 'layout' from the printer option within the driver and pick 'short edged binding'. Still no luck.

Problem with reading photos from Photoshop

Hello
I have bought a new camera, a Nikon 3200. I have installed View NX2. I have downloaded Adobe Camera Raw 7.1. I have unzipped the files and I still cannot open my photos from my Creative Cloud Photoshop. Can anyone help.
Kind regards
Lis

Are you trying to open nikon raw files in photoshop?
Camera Raw comes with Photoshop you didn't need to download it.

Problem with Print Email from Web IC

Hello Experts,
I am currently working on CRM 6.0. When i try to print an EMail from Web IC using Print Message Button at the bottom of Email body, I can only find this email in spool rather than printing on printer.
Also I have assigned the printer to my user. Even though `m not able to get the print of the email using Print Message Button. Please Advice.
Thank you.

I have a same problem. I've turned on print immediately, but it still prints E-mails to spool and not to printer. Printing from GUI works ok. Do you have any other advice?
Best regards,
Duško Šorak

Problem with printing checks from quicken 2004 - using Vista (32bit) and Officejet J6480

I have used my quicken 2004 version with my old XP with no problems and HP officejet J6480 All-in-One. Just got a new computer and everything was going great until I went to print checks - it prints one line and then stops printing. I assume the problem is with the Vista - is the Quicken 2004 too old?

Hi , Welcome to the HP Forums! I noticed that you cannot print checks with Quicken, when using your HP Officejet Pro 6830e all-in-one on iOS. I am happy to take a look into this issue for you! Some questions for you: What version of iOS are you using? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you try to print in TextEdit?Are you able to make copies with the printer? Copying Documents.Have you uninstalled the old printer software, and installed the software for your new printer? Once I know these answers, I will do some further research for you! Thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

How do I resolve issues with missing layers when opening a Tiff file from Photoshop CS5.1?

I am downloading Tiff images from a partners website. After extracting the file and opening from Photoshop CS5.1 it's only displaying one of the original image layers. For example and image with two guys shaking hands in an office is only opening the clipped two guys and not showing the backgroud. The vendor says the files open fine on their end which leads me to believe its a download or photoshop issue. Any recommendations?

Thanks Curt... I don't think my explanation was clear. I'm downloading an image from an external webiste. The image downloads in a ZIP archive. After extracting from the Zip file, I go into photoshop and do file open. Only part of the image appears. It looks as if it's the top layer of a photoshop image but since I didn't build the image, I'm not certain it was built with multiple layers. Any ideas?

Problem with printing 6x4 from Photoshop CS5 to Epson 2880

Similar Messages

Maybe you are looking for