Problem with printing and scanning after updating to Mavericks for my Photosmart C7180

After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format.  I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc.  I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer.  What do I do now?

Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Sync problems with 3gs and itunes after update iOS 5.0

    I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

    I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
    Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

  • Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

    Hello All,
    After updating to Android Lolipop three days ago, on my phone occured some problems. 
    1. The hearing while calling/receiving a call is very low, when the volume is on max. It was extremly high on max volume before the update. 
    2. Now when I'm using the camera most of the pictures are captured with low quality and not well focused. Around one out of four pictures comes out with good quality and well focused. But I reviewed the settings and tried do switch them all the ways around but the problem still occurs. 
    Any help will be appreciated! Hopefully the next update will fix these issues.
    Regards,
    Sava

    gvdkolk wrote:
    Hello Guru,
    One question:
    Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
    Just edge. I refreshed apn restart the phone, no result.
    Is this a result of the update?
    Thanks in advance,
    Ger
    Hi Ger
    The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
    .....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
    Check out THIS THREAD .
    I can't help you much on this one....Sorry.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I am facing problem with wifi and cellular after update  Apple iOS 8.0.2

    How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Problem with Usernames and Workgroupmanager after update to 10.6.4

    After the update to SLS 10.6.4 i can´t delete Users in the Workgroupmanager. The login in the Wiki is also out of order: some Usernames will be accepted - some not: "Martin Fuermoos" will be rejected - only the shortname "martinfurmoos" is OK.
    ????

    I am having the same issue.
    The issue has effectively crippled our staff who depend heavily upon WIKI for SOP's and Core Business Processes.
    Key Symptoms:
    1. Some users can log in with 2nd short name; however, several users report that they can only login using their primary short name. --!! We use FirstnameLastname as primary and Firstname.Lastname as 2nd short name. All users are in the habit of using second short name. !! --
    2. Some users who can only login using primary shortname no longer have permission to access core work group wiki pages.

  • How can I get my Canon MP600 printer to print and scan after upgrading to Mavericks?

    I recently upgraded to Mavericks and the first thing I discovered was that my Canon MP600 printer would not scan.  Checking online I find that others have had the same experience.  Now it won't print either.  Anyone know what can be done to resolve this?

    This has been a major pain in the *** for me! I have trawled too many online discussions and forum threads on this only to find no real answers that work. In the end I found some software called VueScan which although cost me $40, has now allowed me to scan from my MP600. Check it out at http://www.hamrick.com/
    Cheers
    CF :-)

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

    Hi, everyone.
    I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
    after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
    I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
    Thanks,
    Fabian Alberto Campo
    MCT-MCSA 2012-MCITP365-MCTS
    Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

    Hi Fabian,
    Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
    In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
    Actions pane to reset OWA virtual directory.
    Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
    Regards,
    Winnie Liang
    TechNet Community Support

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • HP Officejet Pro 8600 N911g always cannot print and scan after turn on the Mac from sleep

    Dear Community:
    This is my printer:
     1. Product Name and Number
    Product Name HP Officejet Pro 8600 N911g Product Model Number CM750A Product Serial Number {Private Information Removed} Service ID 23022 Firmware Version CLP1CN1150CR Total Page Count 4187
     2. Operating System installed (if applicable) 
         Mac OS X 10.7.5
     3. Error message (if any) 
    After several issue which prevented me from printing I uninstalled all HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro-8600_v12.23.0.dmg after complete I can print and scan. then I go home and put my laptop to sleep. after I come back to work this morning I cannot print and scan again. HP utility cannot connect to that printer because all information there (all fields) displayed as: unknown Please help.
    4. Any changes made to your system before the issue occurred
         Nothing. I just put my Mac to sleep and put it back on.
     5. In the subject title, include a brief, specific description of the problem, and your product information (i.e., product name of your laptop, notebook, printer, other device, etc.)
    After several issue which prevented me from printing I uninstalled all HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro-8600_v12.23.0.dmg after complete I can print and scan. then I go home and put my laptop to sleep. after I come back to work this morning I cannot print and scan again. HP utility cannot connect to that printer because all information there (all fields) displayed as: unknown Please help.
    Is there anyone out there who have any idea on how to solve this problem? Thank you all in advance.
    This question was solved.
    View Solution.

    OK, here are more specific instructions:
    1. Open Finder (double-click the Finder icon in the Dock).
    2. On the left side of the resulting Finder window click on Applications.
    3. Double-click on "Image Capture".
    4. Follow the instructions above.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • Problems with printer and network connectivity

    So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
    Here's what I've checked/tried so far:
    All the wireless services are enabled on my printer and my mac
    I've reset the printing system on my mac, printer settings to factory defaults
    Restarted mac/printer/iPod
    Restarted router
    Reinstalled HP printing software that came with the printer
    All software is up to date
    Wireless printing on another windows computer does work
    Setting up wireless printing using the HP install disc doesn't work
    Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
    Printing over USB is problem-free
    When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
    More info
    MacBook Pro (13 inch, early 2011)
    Mac OS X Lion (10.7.2)
    HP Photosmart e-All-in-One B110a
    Router is a Huawei HG556a that I got from Vodafone NZ
    Thanks in advance!

    http://support.apple.com/kb/DL907

  • Problems with printer and extreme n

    Hi I am having problems printing out wirelessly with my airport extreme and my canon pixma ip 4000.
    If I have a document in Word (for example) that needs printing I will send 1 copy to print and it will print fine. If I do one then decide I need another I cannot get it to print until I have restarted the base station, restarted my machine and restarted the modem.
    If I know that I want more than one copy and change the amount of copies to print out it will print the first page fine then it will half print the second page and then I have to go through the whole rigmarole again!!
    I am wanting to print off 10 pages of Thank you cards for my daughters wedding and it is literally driving me insane. For my sanity I am hoping someone has an answer to this problem.
    Cheers.
    Message was edited by: Alison Bancroft

    Hi,
    I am having the same problem. Apple did a firmware update to the Airport Extreme N after Leopard came out and that seems to have made the problem worse. I've learned that reseting the Airport Extreme in Airport Setup Utility, then unplugging the printer from the network, turning the printer off, turning the printer on, then plugging the printer USB connection back in will reset everything so it works, but it will randomly crash again, sometimes days later, sometimes in the middle of the next job. Does anyone have an explanation???
    Abbie

Maybe you are looking for