Problem with printing checks from quicken 2004 - using Vista (32bit) and Officejet J6480

I have used my quicken 2004 version with my old XP with no problems and HP officejet J6480 All-in-One. Just got a new computer and everything was going great until I went to print checks - it prints one line and then stops printing. I assume the problem is with the Vista - is the Quicken 2004 too old?

Hi , Welcome to the HP Forums! I noticed that you cannot print checks with Quicken, when using your HP Officejet Pro 6830e all-in-one on iOS. I am happy to take a look into this issue for you! Some questions for you: What version of iOS are you using? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you try to print in TextEdit?Are you able to make copies with the printer? Copying Documents.Have you uninstalled the old printer software, and installed the software for your new printer? Once I know these answers, I will do some further research for you! Thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Similar Messages

How to print checks from Quicken

Using HP C7180, Windows 7, can not print checks from Quicken 2013.

hi,
when i print check some cases the TDS value not getting.
it printing 0 value.
in fb03 the TDS value is there kindly clear my probelm urgent.
regards
praveen.

When printing checks in Quicken 2010 using hp c6280 doesn't print correct, but prints ok HP PSC 2355

When printing checks in Quicken 2010 using hp c6280 doesn't print correct, but prints ok on HP PSC 2355 all in one printer i am using Windows XP. Checks print correctly when using Quickbooks on HP C6280 printer.

Hi Omar,
There are several things that can cause this issue. Check out the following link for steps you can take to resolve it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lc...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Problems with 'Print Booklet' from InDesign CS4

I am having problems using the 'Print Booklet commane in InDesign CS4. I have done this 100s of time from CS3 with no problems but for some reason it just won't auto duplex (print on both sides of the paper) when I do it from CS4. USing exactly the same settings, computer and file. The printer is setup correctly as will print double-sided automatically from other apps. Using mac leopard. Any ideas?

Unfortunately, I have tried this. I choose 'layout' from the printer option within the driver and pick 'short edged binding'. Still no luck.

Problems with print range from 1 to 9999 during printing

Hi All,
In my project i am printing the datas in a JTable by a click of the button.I have used the following link:-
http://developer.java.sun.com/developer/onlineTraining/Programming/JDCBook/advprint.html
to print that data from the JTable.The main problem i have is that
1) The font size in which the tableheader and tabledatas printed are so small.So that i need to increase the font size for both tableheader and tabledatas?
2)When i click the printButton for printing it opens a dialog box showing print range from 1 to 9999. And in the pages from 1 to 9999.
I don't want this.I want only 1 to 1.I know that by using Pageable
interface u can change it.But i don't know how to do it
Any one help me to solve this 2 problems i will be very thankful to u.It is Urgent.For ur reference i will provide my Code:-
import javax.swing.*;
import javax.swing.table.*;
import java.awt.print.*;
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Dimension;
import java.io.*;
public class PrintReportPanels extends JPanel implements Printable
JTable tableView;
String aLine="";
DefaultTableModel model;
Vector columnNames = new Vector();
Vector data = new Vector();
JScrollBar jsb = new JScrollBar(JScrollBar.HORIZONTAL);
JScrollBar jsb1 = new JScrollBar(JScrollBar.VERTICAL);
JPanel southPanel=new JPanel();
JPanel printPanel=new JPanel();
JButton printButton=new JButton();
int v=ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED;
int h=ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
private Font fnt=new Font("Arial",Font.PLAIN,20);//Not working for increasing the font size
public PrintReportPanels()
     try
this.setLayout(new BorderLayout());
UIManager.put("ScrollBar.track",Color.red);
UIManager.put("ScrollBar.thumb",Color.blue);
     FileInputStream fin = new FileInputStream("Spooler.txt");
     BufferedReader br = new BufferedReader(new InputStreamReader(fin));
     // extract column names
     StringTokenizer st1 = new StringTokenizer(br.readLine());
     while( st1.hasMoreTokens() )
     columnNames.addElement(st1.nextToken());
     }               // extract data
     while((aLine = br.readLine())!=null) //br.readLine() which contains the Spooler.txt datas is assigned to aLine
     StringTokenizer st2 = new StringTokenizer(aLine);
     Vector row = new Vector();
     while(st2.hasMoreTokens())
     row.addElement(st2.nextToken());
     data.addElement( row );
     br.close();
     catch (Exception e)
          e.printStackTrace();
model = new DefaultTableModel(data,columnNames);
tableView = new JTable(model);
JScrollPane jsp = new JScrollPane(tableView);
this.add(jsp,BorderLayout.CENTER);
this.add(jsb,BorderLayout.SOUTH);
this.add(jsb1,BorderLayout.EAST);
this.add(southPanel,BorderLayout.SOUTH);
southPanel.setLayout(new FlowLayout());
ImageIcon ic=new ImageIcon("print.gif");
printButton.setIcon(ic);
printButton.setBackground(Color.white);
printPanel.setLayout(new FlowLayout(FlowLayout.LEFT));
printPanel.add(printButton);
southPanel.add(printPanel);
this.validate();
this.repaint();
printButton.addActionListener( new ActionListener(){
public void actionPerformed(ActionEvent evt) {
     PrinterJob pj=PrinterJob.getPrinterJob();
     pj.setPrintable(PrintReportPanels.this);
     pj.printDialog();
     try{
          pj.print();
     }catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat,int pageIndex) throws PrinterException
     Graphics2D g2 = (Graphics2D) g;
     g2.setColor(Color.black);
     g2.setFont(fnt);
     int fontHeight=g2.getFontMetrics().getHeight();
     int fontDesent=g2.getFontMetrics().getDescent();
     //leave room for page number
     double pageHeight = pageFormat.getImageableHeight()-fontHeight;
     double pageWidth = pageFormat.getImageableWidth();
     double tableWidth = (double) tableView.getColumnModel().getTotalColumnWidth();
     double scale = 1;
     if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
     double headerHeightOnPage=
tableView.getTableHeader().getHeight()*scale;
     double tableWidthOnPage=tableWidth*scale;
     double oneRowHeight=(tableView.getRowHeight()+
tableView.getRowMargin())*scale;
     int numRowsOnAPage=
(int)((pageHeight-headerHeightOnPage)/oneRowHeight);
     double pageHeightForTable=oneRowHeight*numRowsOnAPage;
     int totalNumPages= (int)Math.ceil((
(double)tableView.getRowCount())/numRowsOnAPage);
     if(pageIndex>=totalNumPages)
return NO_SUCH_PAGE;
     g2.translate(pageFormat.getImageableX(),
pageFormat.getImageableY());
     g2.drawString("Page: "+(pageIndex+1),(int)pageWidth/2-35, //For printing the page no. at the bottom
(int)(pageHeight+fontHeight-fontDesent));//bottom center
     g2.translate(0f,headerHeightOnPage);
     g2.translate(0f,-pageIndex*pageHeightForTable);
     //If this piece of the table is smaller than the size available,
     //clip to the appropriate bounds.
     if (pageIndex + 1 == totalNumPages)
int lastRowPrinted = numRowsOnAPage * pageIndex;
int numRowsLeft = tableView.getRowCount() - lastRowPrinted;
g2.setClip(0, (int)(pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(oneRowHeight * numRowsLeft));
     //else clip to the entire area available.
     else{
g2.setClip(0, (int)(pageHeightForTable*pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(pageHeightForTable));
     g2.scale(scale,scale);
     tableView.paint(g2);
     g2.scale(1/scale,1/scale);
     g2.translate(0f,pageIndex*pageHeightForTable);
     g2.translate(0f, -headerHeightOnPage);
     g2.setClip(0, 0,(int) Math.ceil(tableWidthOnPage),
(int)Math.ceil(headerHeightOnPage));
     g2.scale(scale,scale);
     tableView.getTableHeader().paint(g2);//paint header at top
     return Printable.PAGE_EXISTS;
public static void main(String[] args)
     JFrame frame=new JFrame();
     RepaintManager.currentManager(frame).setDoubleBufferingEnabled(false);
     JPanel panel=new PrintReportPanels();
     frame.getContentPane().add(panel);
     frame.setSize(800,600);
     frame.setVisible(true);
Pls. do provide the reply and tell me where i go wrong.I will be waiting for ur reply.It is very Urgent.
Thanx,
m.ananthu

Hi conner,
1) My font size problem is over i have used the tablename.setFont(new Font("Arial",Font.PLAIN,20)).It does change the font size of the JTable contents but the JTable Header still remains the same.I want to change the font size of the JTable header as well.How to do it?
2)According to my second problem can u provide the code of how to change the page range from 1 - 9999 to 1-1?So that i will be very thankful to u.
Thanx,
m.ananthu

Problem with Print Email from Web IC

Hello Experts,
I am currently working on CRM 6.0. When i try to print an EMail from Web IC using Print Message Button at the bottom of Email body, I can only find this email in spool rather than printing on printer.
Also I have assigned the printer to my user. Even though `m not able to get the print of the email using Print Message Button. Please Advice.
Thank you.

I have a same problem. I've turned on print immediately, but it still prints E-mails to spool and not to printer. Printing from GUI works ok. Do you have any other advice?
Best regards,
Duško Šorak

Problem with printing 6x4 from Photoshop CS5 to Epson 2880

Hi,
bit of an odd one. I can print A3 and A4 no problem, but when I try to print a 6 x 4 it looks like the printer is not reconising the size of the paper. It prints the image the right size, but as though it were printing it on a larger sheet of paper, in the left hand side with a a 5cm space to the right (which is actually the top of the image).
I have set the printer to 6 x 4 for both image and paper.
Any ideas?
Thanks

I have an Epson 2200, but am assuming the drivers and print dialog accesing that driver and ICC profiles are very similar to Epson's 2880, which is the same size as the 2200.
In order to print 6 x 4, whish isn't a standard page size in the print dialogs, are you setting up a custom page size? (Print > Print Settings > Page Size > Manage Custom Sizes) - This works fine here, but if the paper is the wrong size, it won't print. The print driver requires that the paper size actually be 6 x 4.
Of course, an alternative approach might be to print on a standard paper size, maybe adding trim marks, and then cutting the page down to 6 x 4 after printing.
If none of this helps, I suggest you contact Epson's tech support.

Problem with function call from sql when using distinct

I have the following problem.
SELECT DISTINCT colA from tabA where my_function(colB) = 'TRUE'
This statement will return a handfull of results from a table with 70k + records. The function takes about 0.5 secs to execute.
How do i force the optimizer to do the select distinct first then execute the function on the results rather than execute the function for every single line first?
Thanks in advance
Keith

Let's compare some of those methods:
michaels> CREATE OR REPLACE FUNCTION my_function (tr VARCHAR2)
   RETURN VARCHAR2
AS
BEGIN
   DBMS_APPLICATION_INFO.set_client_info (SYS_CONTEXT ('userenv','client_info') + 1);
   IF LOWER (tr) LIKE '%name%'
   THEN
      RETURN 'TRUE';
   ELSE
      RETURN 'FALSE';
   END IF;
END my_function;
Function created.
michaels> CREATE TABLE taba AS SELECT object_id cola ,object_name colb FROM all_arguments
Table created.
michaels> SELECT COUNT(*) FROM taba
COUNT(*)
     78786
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT colA from tabA where my_function(colB) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
78786
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT cola FROM (SELECT ROWNUM r, t.* FROM (SELECT DISTINCT cola, colb FROM taba) t)
          WHERE my_function (colb) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
14225
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT cola FROM taba WHERE (SELECT my_function (colb) FROM DUAL) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
14281
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> SELECT DISTINCT cola FROM taba WHERE EXISTS (SELECT ROWNUM FROM dual WHERE my_function (colb) = 'TRUE')
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
13913
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> WITH temp AS
(SELECT DISTINCT colA, colB FROM tabA)
SELECT DISTINCT colA FROM temp WHERE my_function(colB) = 'TRUE'
167 rows selected.
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
78786
michaels> EXEC dbms_application_info.set_client_info(0)
michaels> WITH temp AS
(SELECT colB, my_function(colB) func FROM (SELECT DISTINCT colB FROM   tabA))
SELECT DISTINCT colA FROM tabA a, temp t WHERE a.colB = t.colB AND t.func = 'TRUE'
michaels> SELECT SYS_CONTEXT ('userenv','client_info') ci FROM dual
CI
78786 The combination with exists, rownum and dual gives the least calls to the function.

Problem with nef files from my d5100 using cs4

I have cs4 I also have a nikon d40 and I just bought a Nikoin D5100 I cannot see the nef pictures using bridge cs4 how do I fix?

The DNG conversion in Bridge will only convert files that your version of Camera Raw already supports. You will need the latest version of the freestanding DNG converter program which is free and available from Adobe. I'm going to assume that you are Windows user. Here is the link to the Windows version of the program:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
You need to download the program and install it and run the program. It is not a plug-in, and it is not part of Photoshop, Bridge, or Lightroom.
Just one word of advice. When you start the DNG converter you will be prompted to choose a FOLDER containing raw files. Be sure to just choose the folder, but don't open it. If you open the folder the DNG converter will tell you that there are no compatible files. If you want to convert just a single file, drag/drop that file onto the icon for the DNG converter. The program will start, and the conversion will take place.
Incidentally, I am 70 years old, and on the verge of retirement myself. I understand your situation completely. If you have any further questions about how to use the DNG converter, or whatever, feel free to ask. There are a bunch of very helpful people here who can get you through just about any problem.

Weird problem with loading data from an XML using a for loop

Hi,
I have a strange problem. I have encountered this thing many a times but still don't know the proper workaround for it.
I am trying to load swf file, a video file or an image. They can be present on a local system or on a remote server also. All the entries corresponding to the files to be loaded is made in an XML file. I traverse through the nodes of the XML using a for loop. On the complete event of loader info, example:.
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
I fill a container with the loaded data.
My problem is when I am using for loop it doesn't works properly but if i use a statement like this:
someFunc()
     if(i<arr.length())
     ... do something...
     loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
private function onComplete(e:Event):void
... do something...
i++;
All files are loaded properly.
I think this can be because the for loop processes pretty fast but the content takes time to load, which ultimately leads to some wierd results.
Please let me know how can this thing be done correctly by using a for loop also.

You don't want to use a for loop to load several items. The way you almost appear to have it is the proper approach... load a file and use the completion of its loading to trigger loading the next file.

I have the same problem with printing as by laurieb13019. Have tried everything and still cannot print a document.

I have tried everything to print a .PDF document in Adobe Reader and cannot. It is printable with another .PDF software but not with Adobe Reader.

You cannot attach files or screenshot in email replies; it won't make it into the forums.
How to share a document with the forum:
https://forums.adobe.com/thread/1408375
How to post a screenshot:
https://forums.adobe.com/thread/1070933

Problem with creating a new Siebel account using Web Service and ADF

Problem solved.
Edited by: noah.fang on Mar 15, 2011 3:45 PM

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by phil housley ([email protected]):
<HR></BLOCKQUOTE>
sorry this is first time I tried to reply on this group
The USER is SYSTEM and there is no real password when first installed. However you do need to type something in the password field . This can be anything if you have not added a password.
Phil
null

Prining checks from Quicken

I have the HP Officejet 8600 all in one and it wors great except that i would like to print checks from Quicken and I see no way to do it.
Any suggestions?
Thank you for your time and expertise.
Chinstrap......

Hi there,
I'm not sure what device you are using, but you could try the HP e-print app to help. You'll find it here .
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Since installing Snow Leopard 10.6.8 I can't print checks on Quicken 2006. I also discovered that my M.S. Word 2004 freezes and won't work when I try to "save as".

Since installation of Snow Leopard 10.6.8 a week ago, I have not been able to print checks on Quicken 2006.
Now I find that Word 2004 will not "save as" and freezes.
Any help?

Unfortuantely you are victim of bad timing. Apple did release a followup security update that fixes those issues. You can download it from:
http://support.apple.com/kb/DL1489
If issues still persist, the tip here:
http://snowleopard.wikidot.com/h-n
May help your Microsoft Office issue as far as duplicate font clearing.

Problem with printing checks from quicken 2004 - using Vista (32bit) and Officejet J6480

Similar Messages

Maybe you are looking for