Problem with printing ever since I've changed the yellow cartridge ink

Hello,
I have the new printer - HP Ink Advantage 3525 that was working great.
I got a message on my PC which says that I need to change the yellow cartridge one, so I did it very easily, but even since I get tons of problems with my printer.
The communication between the pc and the printer doesn't work all the time. So I reset all the properties and did it again from scratch and not it's ok.
The main problem is that no matter what I'm priniting, the color are really not accurate when all the picture is almost all yellow! I did all the clear options and it still does it.
Any help please?

If Outlook has "stopped working" it may be due to the Outlook iTunes Sync Add-in that was installed when you installed iTunes 7.3.
If you disable that add-in, Outlook will stop crashing - however, you will not be able to sync your calendar and contacts. Apple has been made aware of this issue.

Similar Messages

My daughter bought her touch last August. It has had problems with sensors ever since. The store cannot fix it. What should I do now?

My daughter bought a touch last August. It has had problems with sensors ever since and does not hold a charge. We have taken it to the lcoal store twice with no repairs working. What do I do next?

Call Apple and ask to be transferred to Customer Relations. Explain the situation to them and have any case numbers handy. They will take care of you.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

My hp 7160 wants to print in black only after replacing the yellow cartridge. Any suggestions?

My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine.
I have tried different programs to color print in, all return the same error message.

Hi @obxgirl,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Are there any known problems with firefox4 and yahoo? Ive had problems with yahoo ever since I upgraded. If there are any problems, are there any solutions?

When I check my yahoo mail, a lot of times emails will disappear, or I will click on one to read, and it will open one that is above it. Also there are times when I am on a page, and a yahoo search page will open saying page could not be found, and it wasnt even something I was doing.

You have Adware installed. Click the Firefox button, go to Add-ons | Plugins and disable '''My Web Search'''. See http://en.wikipedia.org/wiki/My_web_search
Also, update Firefox to the latest version which is 4.0.1 by clicking Help | About Firefox | Check For Updates button.
In addition, update Adobe Flash via http://get.adobe.com/flashplayer/
Here's the Adobe security advisory for Flash: http://www.adobe.com/support/security/bulletins/apsb11-12.html

Converted to iTunes 11 and have a problem with printing. Doing a cover/songlist, the songs jam up into a space about an inch wide. Solutions?

Two days ago I upgraded to iTunes 11. It was a shock, but I'm learning where everything is. When I print a cd cover/songlist, the songs all jam up into a one inch rectangle in the middle of the page. I wanted to be able to print 28 instead of 27 songs in my list, but not jammed together. I know it's a simple solution, but I don't know it. Help, folks. Thanks.

Good news! I received an iTunes update (11.0.1.12) from Apple today and the problem is fixed.

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problems with Print Preview in PO.

Hi Experts, I need your help!!
I have problems with print preview in purchase order, if the PO has moviments ( GR or Invoice ) I cant see the form of PO in Print Preview...Anybody has idea about happen?
I can see the form before i make the movements after i cant see anymore..This is right?
There is the document explain the problem
[http://www.easy-share.com/1903543233/PO_PROBLEM1.doc]
Thanks

Hi,
What is the particular error message which prevented you from print preview? I have not seen such case before in many systems.
Cheers,
HT

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Problems with Print Program of Production Order (CO03) !!

Hi all,
I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu Functions >> Print). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification?
Thank you in advance.

Hi MURUGESAN THANGATHURAI ,
Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), it will not update this?
What's problem?
Thank you guys.

I had a problem with print preview of billing document.

HI all,
I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve it.

hi,
for both the output types , r u using same sapscript or smartform?
if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
and if differect sapscript or smartform then you should not get such problem.
you can check the sapscript or smartfrom in TNAPR table.

Problem with printing txt file

I have a problem with printing txt file. My code looks like :
String filename = something.txt";
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService[] services = PrintServiceLookup.lookupPrintServices(
          flavor, null);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
pras.add(PrintQuality.DRAFT);
pras.add(new Copies(1));
pras.add(MediaSizeName.ISO_A4);
pras.add(Sides.ONE_SIDED);
pras.add(Chromaticity.MONOCHROME);
PrintService service = ServiceUI.printDialog(null, 200, 200,
          services, services[0],
          null,
          pras);
if (service != null)
try
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(filename);
DocAttributeSet das = new HashDocAttributeSet();
Doc doc = new SimpleDoc(fis, flavor, das);
job.print(doc, pras);
Thread.sleep(10000);
catch(FileNotFoundException e)
catch(PrintException e1)
catch(InterruptedException e2)
It doesn't work :(
What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
I will be very gratefull for help :)

I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file

Problem with printing ever since I've changed the yellow cartridge ink

Similar Messages

Maybe you are looking for