Problem with printing graph larger than screen size in labview6 (plots are shopped).

I have attached with my message the report I try to print. It is a Labview 6 vi.
I had no problem with Labview 5. But with Labview 6, the plots are shopped (all the rest of the report is correct). What is printed is not what I see.
The graph is intentionnaly built very large, then rescale to fit page, in order to improve the print quality of the plots. I repeat it, it worked fine with Labview 5.
Thanks if you can help.
Lionel.
Attachments:
Print_of_large_scale_graph.vi ‏284 KB

Hi Lionel,
I experienced a similar problem days ago: re-compiling a vi from LV 5.1 to LV 6.0.2 its front panel could not be printed anymore; no error, just a blank sheet.( The mass compile procedure did not reported any error).
The only way to get out from this headache was to re-build the vi in LV 6.0.2, I simply selected all its diagram and copied it in a new vi, saved it and I got print-outs!
Try it.
Good luck,
Alberto

Similar Messages

  • Why does my artwork print slightly larger than actual size? - MacOS 10.9.2

    I have an issue which I have no answer.  Every time I print an artwork for product mockup, say a 3x5 card, it prints slightly larger than a 3x5 card.  I have to manually scale my artwork down to 98.5 in the print dialog to get as close as possible to the actual size.  Its not related to a specific printer.  I have an HP printer and a Canon printer and the issue exists exactly the same between the two.  I'm running Illustrator 17.1 on an iMac running MacOS 10.9.2.  Can you please help make this easier for me?
    Wayne Carey
    Marketing Graphics Designer
    Strike King Lure Company

    Wayne,
    Are you using PostScript printer drivers (or at least PostScript emulation)? Non PostScript drivers may behave a bit like gremlins.
    What happens if you Save As or Print to PDF and then print from that using the actual size/no adaptation to paper size?

  • Safari save as window opens larger than screen size and I can't get to the

    In safari, I choose File -> Save As. The save dialogue window is taller than my screen and the buttons get buried under my bottom toolbar. I can't reach the save buttons and I can't seem to reach the right hand corner to manual resize it. I've tried clicking the green button in the top left hand corner but it doesn't change a thing.
    thanks to anyone that can clear this up.
    s

    I tried clicking the blue export button so its pointing down and the save dialogue window does shrink. However, the adjustable dashes that normally appear in the bottom right hand corner, are not there. The only appear when the export button is pointing up. Too bad I can't reach it.
    Your 2nd idea worked! My display was already at max resolution BUT I had a 2nd monitor and dragged the save box over and the smaller display was enough to reach that bottom corner.
    yeah!

  • When I open Firefox, it expands to larger than screen-size and I can't use ANY features. How can I fix this?

    When I first open Firefox, it appears fine, then one second later it expands so that I cannot see any thing but the current message. The only way I seem to be able to even exit is to use the Windows Task Manager to kill the application. The other user on the same machine does not have this problem. We are both using Firefox version

    Which security software (firewall) do you have?
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls

  • Problem with printing more than one page (ghostscript broken?)

    Hello,
    since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted.  As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
    root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
    -rw-r--r-- 1 root root  9906288 21. Mär 2010  /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
    -rw-r--r-- 1 root root 11402624  8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
    [root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
    Löse Abhängigkeiten auf...
    Suche nach Zwischen-Konflikten...
    Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
    :: libspectre: benötigt ghostscript>=9.00
    [root@arch32 dieter]#
    Anyone else having printing problems or a solution for my problem?
    Thanks, Dieter

    This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
    So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

  • I cannot print anything larger than a 4x5" from LR4 to my Epson 3880

    No matter what I do I cannot print pictures larger than a 4x5" image from LR4 to my Epson 3880.
    I have doublechecked all of my settings in the page and print sections. I have even watched various internet training on printing from LR4 including Matt Kloskowski in Kelby Training....all to no avail.
    I have absolutely no problem with printing in PS CS6.

    The problem continues to be exporting a photo from IPHOTO to PE 9 organizer
    Why do this? You're just making life harder. If you want to use iphoto as your image manager, don't use organizer, or vice versa. If you want to use iphoto to organize your photos, set up PSE as your external editor there, or export the photos to the desktop, save the edited photos as new images and reimport them to iphoto. Using both only makes your life harder and creates problems, as you've discovered.

  • New MacMini.....Any problem with hard drive greater than 500gb?

    I'm interested in buying a new MacMini. I could definitely use a hard drive larger than 500gb though. Is there any problem installing a drive larger than 500gb? Since the Mac store only offers 320 and 500gb, I'm wondering if there is some limitation (special size?) or other problem.
    I'd rather not have to use an additional external drive.
    Thanks in advance.
    Fabian

    Hi Fabian,
    any 2.5" SATA harddisk with a maximum height of 9.5mm fits in the Mac Mini.
    OSX doesn't "care" about the amount of GB the harddisk has.
    With the above specs 750GB seems to be the largest widely avaiable size but 1TB should be avaiable too.
    Have a look at MacSales or NewEgg.
    Regards
    Stefan

  • Problem with print photo 13x18

    hi i have a problem with print photo (13x18) size it cut in the end of photo i use hp photo creations but if choose 100%size or full screen  same result  please what can i do;  i am disapoint to buy this printer if photo print so

    Cornelia-I, I used "single/image contact sheet" and there is a Lightroom
    Template for 2x2 cells.  I modified this a little to make the cells smaller
    to provide room for the captions and margins for hole punching and binding
    the sheets.
    No, I surely did not type in each caption.  The captions were Title plus
    Caption taken from the metadata plus a comma and # sign preceding the
    filename which was a date/sequence number.  I was printing four different
    images on each page and 36 images total so there were nine pages of the
    booklet.
    I didn't try the idea of switching the Photo Info option off and back on to
    the custom package because I had already created a custom preset and as soon
    as I discovered that all it needed was to have a period added or removed at
    the end of the line each time, it was easy to simply switch back and forth
    between the two text presets which was doing the same thing you recommended.
    Whole job was simple once I discovered that the problem was simply that I
    needed a new version of the text string every time I printed and couldn't
    simply keep using the same one over and over.  The time wasted was lost
    trying to figure out what was causing the lines to suddenly become truncated
    when previously they had been there.  Which is why I wrote it up so others
    need not waste that time if they want to do this.

  • Problem with printing to a HP Photosmart Premium C410

    Printer purchased and installed on July 9, 2011. Connected wirelessly to a D-Link Xtreme N GIGABIT  Router  Model   DIR-655. Router IP address 192.168.0.1
    The printer worked fine until last week. Then one of our Laptops could suddenly not print or scan anymore.
    There are Two Dell Laptops connected to the same router.
    The first Laptop, Dell XPS M1530 running Windows Vista Home Premium Service Pack 2, 4GB Ram 32 bit OS. This machine can print to HP C410 printer directly with no problems. It can see the printer’s embedded web server at 192.168.0.254 and can scan from there into a file on the laptop or can print the just scanned image from the embedded web server.  It can also print to it using HP eprint.
    The second Laptop, Dell Inspiron M1545 running Windows 7 Home Premium Service Pack 2, 3GB Ram 64 bit OS. This machine CANNOT print directly to the HP printer.  It can see the printer’s embedded web server at 192.168.0.24 and can scan from there into a file on the laptop (I used a PDF format and brought it up in Adobe Reader to be sure) but it CANNOT print the just scanned image from the embedded web server.  The print process fails and shows the document still in the spool queue with an error status. It can print to the HP C410 using HP eprint.
    I have used the HP suggested process of uninstalling all the printer software and re-installing it from the original CD (tried this three times) and by downloading it from www.hp.com. I have also installed the HP fix titled: Following a Network Installation, the Product Loses Functionality and Is Missing from the Devices and Printers Menu after the Computer Is Restarted in Windows 7 (64-bit Only)  
    I installed the fix after a complete un-install / re-install cycle.   I have run the HP Print Diagnostic Utility at this point in the process and it returns a clean (All Green Check Marks) report but its final test print fails in the same manner.  
    Thanks in advance for help in solving this problem.

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • Problem with printing pdf file

    hello,
    lately i have problem with printing pdf file:
    i click on the print button and the respod is very slow
    it takes more than a minute till the print window apears.
    i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
    other programs i'd working much faster.
    please advice,
    thank you

    No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

  • Problem with printing ALV lists

    Hey Guys,
    I have a problem with printing ALV lists ,
    I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
    it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
    How can i print  them all in one page?
    Thanks in advance
    Noha Salah.

    Hey Max,
    I tried setting the Layout-list_append  before my block_list_append function call
    And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
    is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
    to their original format?

  • I had a problem with print preview of billing document.

    HI all,
    I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
    For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
    If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
    I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve  it.

    hi,
    for both the output types , r u using same sapscript or smartform?
    if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
    and if differect sapscript or smartform then you should not get such problem.
    you can check the sapscript or smartfrom in TNAPR table.

  • Problem with Printing from Spool

    Dear Experts,
                  I am facing the problem with Printing, Once i press the Print button, the spool is generated. But Instead of giving one page, It is generating the more than one page. Some times, the last page its getting is blank. I am confused how this happens.
    Kindly solve my issue, this happen frequently.
    Thanks & Regards,
    Srinivas

    Dear Siva,
                   Everything is ok in SPAD. This happen for few process order for COPI transaction.
    Regards,
    Srini

  • Problem with printing help plz

    Hi Folks,
    Got a problem with printing hope you can help. I have just got back from an online printers some 40 prints. There is a big difference between the brightness of the print (it being a lot darker) and the elements screen. The company I used comes highly reccomended by many different sources. What am I doing wrong and how do I fix?
    Thanks

    which online service provider are you using?

  • Image size of iPhone 5S is smaller than screen size

    When I click any picture with my iPhone 5s, the image size is always 20-30% smaller than screen size. Its like a picture clicked from iPhone 4, is this an issue or is it designed in that way?? Coz Images clicked in potrait mode are always cropped 20-30% and I am not liking it..

    If auto adjust to fit with the Default Full Zoom extension isn't working then the pages may be using absolute values for elements and in such a case you would have to zoom the pages manually.
    Can you post a link to a few pages where it isn't working properly?

Maybe you are looking for