Problem with printing out of sap to printerserver 2008 connected printer

Hi there,
one of our customers is using a SAP ECC 6 System on a Windwos 2003 Server and is printing over a windows 2008 Printerserver to the printers.
We now have the issue, that there is a problem with lpd. The printer is reach- and pingable from SAP system, also on os-level the printer-server is reachable via telnet on port 515. But within printing, we get the following eror
Status: Incorrect (Failed to connect to LPD)
Job status: Completed
Area: Data transfer
Error: LPD response format invalid
Any idea?
thx for help
Otto

Hello Otto,
It seems the problem is in the connection the LPD on the destination host.
I would check the connection. Please, see note 10758 that can be helpful for this case.
Regards,
Blanca

Similar Messages

Problem with printing graphics in SAP Script

Hi,
I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
Plese tell me the solution.
Thanks,
Srinivas

You need to check your printer settings.Might be drivers are missing.

Problem with printing through SAP

Hi All,
We have problem with printing, only one person through SAP can only print the documents successfully and the remaining are getting incomplete print output. This is happening only for transactions GD23 and FB03 (FI related transactions). We have tried with removing Saplpd folder and installing Sprint as suggested by SAP from note 894444. Still problem persists. Please suggest me in this regards.
Veerendra Kumar.

Hi Ardhian,
We are using Front end printing and already installed SAP GUI new version i.e. 7.10.
Only one user is able to print the document correctly from SAP, and other are getting incorrect print and getting error message "System cannot print the last 80 columns of the report" on one system.
SAP version we are using is 4.7EE.
Let me know if any more information needed for analysing the issue.
VeerendraKumar.
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:35 AM
Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:37 AM

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Problem with printing true colors

Had PSE7 and colors printed true and beautiful. Upgraded to PSE10 and all of a sudden colors printed muddy and dull with purplish overcast. Took printer in for service but problem persisted. Upgraded to PSE11 and once again colors were printing true and beautiful for over a year. Printed a card about 5 days ago using PSE11 - beautiful. Printed a card yesterday using PSE11 and colors muddy and dull with purplish overtones. Installed PSE13 and colors printing dull, muddy with purplish overcast.. I feel it is a problem somewhere in settings of PSE, but can't figure out where. I don't think it is a problem with printer. Both printer and PSE set to Adobe RGB. Color control set to optimize for printer. Using PC with Windows 7, 64 bit. Printer is Epson stylus photo 1400. Thanks for any help, Merrie

See if this helps:
http://helpx.adobe.com/photoshop-elements/kb/color-management-settings-best-print.html

Problem with printing some report

hi very body
we have some problems with printing some reports.
the problem is when printing a report the computer processes stoped
and i should restart the computer a gain to print the report for first time and
then in the second time i have same problem.

Maher,
You can check out the new printer driver test utility verions2.0 on OTN at:
http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
This should help you determine if it is a printer problem or whether you should look into another area.
Also, you don't mention which version of reports, what command line options your using, the computer
configuration your using whether it is a network printer or local printer connected to the machine. Support
will need this information to help determine where your problem lies.
Regards,
The Oracle Reports Team

Problem with printing-- logo comes upside down

Hi ,
We have some problem with printing.
While testing the print output for billing we are experiencing some problems. Every thing in the layout looks fine in the print preview but when i take a print out in my local printer , i see the client logo comes upside down and some lines are missing .
Can some body suggest me how to correct the same.
Regards,
Sekhar.

Hi Michael,
Thanks....
We have checked the printer earlier also and seems to be fine.
Aditional info:
1) We are getting this problem while printing Billing from "VF01" transaction.
2) In this also we have two invoice numbers given by functional guy out of which in for one we are getting the problem that "lines of the first box are not printing" and for second "logo is coming inverted & lines of the first box are not printing"
Regards,
Sekhar.

"Problem with printer or ink system"

Hello, so this morning I printed out a paper and I saw I was almost out of black ink. I replaced the cartridge and everything was okay. When I went to print out another paper I received the error message "Problem with printer or ink system... 0x6100004e" I went to HP support and found a whole bunch of solutions. I went through the first few, there is no paper jams, but then I realized my carriage was either not leaving the dock or it would come all the way left just to go right back. When I open the door, its like the printer thinks the carriage is moving because it keeps turning the way it normally would. I tried resetting it, and looking up other solutions but nothing. My warranty was up in May. It had never had this problem when I changed the cartridges before, so I really need all the help I can get.

Hi andre2015,
Please perform the steps from the link below and this will resolve the issue.
http://support.hp.com/us-en/document/c03253201
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.
Regards
Aneesh

Problem with print photo 13x18

hi i have a problem with print photo (13x18) size it cut in the end of photo i use hp photo creations but if choose 100%size or full screen same result please what can i do; i am disapoint to buy this printer if photo print so

Cornelia-I, I used "single/image contact sheet" and there is a Lightroom
Template for 2x2 cells. I modified this a little to make the cells smaller
to provide room for the captions and margins for hole punching and binding
the sheets.
No, I surely did not type in each caption. The captions were Title plus
Caption taken from the metadata plus a comma and # sign preceding the
filename which was a date/sequence number. I was printing four different
images on each page and 36 images total so there were nine pages of the
booklet.
I didn't try the idea of switching the Photo Info option off and back on to
the custom package because I had already created a custom preset and as soon
as I discovered that all it needed was to have a period added or removed at
the end of the line each time, it was easy to simply switch back and forth
between the two text presets which was doing the same thing you recommended.
Whole job was simple once I discovered that the problem was simply that I
needed a new version of the text string every time I printed and couldn't
simply keep using the same one over and over. The time wasted was lost
trying to figure out what was causing the lines to suddenly become truncated
when previously they had been there. Which is why I wrote it up so others
need not waste that time if they want to do this.

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Problem with printing out of sap to printerserver 2008 connected printer

Similar Messages

Maybe you are looking for