Problem with printing pages on my site...

See one of the newsletters on my website at
http://www.jonbarron.org/newsletters/06-23-2008.php.
Now try printing or "print preview" that same page. You will
see when you view it in print preview or print it out it only
prints the 1st page and then several blank pages. Also it shows up
all screwy. My print.css file is modified correctly so I'm not sure
why on earth it doesn't print anymore then the first page as well
as why it shows up all screwed up. Any ideas guys?

Ok, try this.
Change this:
<link href="
http://www.jonbarron.org/css/style.css"
rel="stylesheet" type="text/css" />
to this:
<link href="
http://www.jonbarron.org/css/style.css"
rel="stylesheet" type="text/css" media="screen" />
Somewhere in that stylesheet lies your problem.

Similar Messages

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

Problem with printing in character mode

Hi
I got a genuine problem in printing continous payslips using character mode with a TALLY6050 printer.
I guess there is a problem with the page setup when i try to print via windows. using different sizes of paper (Letter, A4, A3), the printed data is shifting from one page to another but the shift is following a same trend.
i tried to put one payslip per page using page breaks, but in vain. Three payslips are being printed on one page when viewed in the print perview.
Can anyone suggest any help or tips so that i can solve this problem?
Thanks for your help
Bhavish

Thanks for your response. I went ahead and filed a Correction Action Request for your orignal issue, since I was able to reproduce the same behavior when I ran your VI. The solution of printing the front panel of a subVI displaying the same graph is a workaround for this problem. Please look at the following KnowledgeBase for more details on how to do this. Hope this helps!
How Do I Print a Single Control from the Front Panel (for example, a Graph)?

Problem with users accessing sharepoint 2013 site collection

I have an unbeliveable problem..
I have a sp site with several site collections..
I have around 15 users.. Everybody have access to the root site. Two users do not have access to site collections even though they are in EXACTLY same permission groups like other users who can access those site collections!
I tried to delete them from all user groups in SP, then delete their user profiles in Central Administration, and delete them from Active Directory. After that I recreated their profiles in Active directory, readded them to Central Administration, and again
added them to coresponding groups in SharePoint site collections. They again CAN NOT ACCESS site collections.
What should I do.. This is incredible that 5 users with the same user privileges can access site collections, and 2 can not, even though they are all created in the same way..
Regards,
Srdjan

Hello,
Have you found a solution for this problem? I have the exact same problem with 2 users accessing a site collection (access denied). I found also this row on uls log:
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace:   at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)     at Microsoft.Office.Project.PWA.PJBaseWebPartPage.OnPreInit(EventArgs
e)     at System.Web.UI.Page.PerformPreInit()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionSt... 6955b79c-c42c-50fc-84f8-2b68f97002ea

Problem with printing ALV lists

Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.

Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format?

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Problem with Printing from Spool

Dear Experts,
I am facing the problem with Printing, Once i press the Print button, the spool is generated. But Instead of giving one page, It is generating the more than one page. Some times, the last page its getting is blank. I am confused how this happens.
Kindly solve my issue, this happen frequently.
Thanks & Regards,
Srinivas

Dear Siva,
Everything is ok in SPAD. This happen for few process order for COPI transaction.
Regards,
Srini

Problem with print photo 13x18

hi i have a problem with print photo (13x18) size it cut in the end of photo i use hp photo creations but if choose 100%size or full screen same result please what can i do; i am disapoint to buy this printer if photo print so

Cornelia-I, I used "single/image contact sheet" and there is a Lightroom
Template for 2x2 cells. I modified this a little to make the cells smaller
to provide room for the captions and margins for hole punching and binding
the sheets.
No, I surely did not type in each caption. The captions were Title plus
Caption taken from the metadata plus a comma and # sign preceding the
filename which was a date/sequence number. I was printing four different
images on each page and 36 images total so there were nine pages of the
booklet.
I didn't try the idea of switching the Photo Info option off and back on to
the custom package because I had already created a custom preset and as soon
as I discovered that all it needed was to have a period added or removed at
the end of the line each time, it was easy to simply switch back and forth
between the two text presets which was doing the same thing you recommended.
Whole job was simple once I discovered that the problem was simply that I
needed a new version of the text string every time I printed and couldn't
simply keep using the same one over and over. The time wasted was lost
trying to figure out what was causing the lines to suddenly become truncated
when previously they had been there. Which is why I wrote it up so others
need not waste that time if they want to do this.

Problem with plugins in my web site

Problem with plugins in my web site PLS HELP

i'm pretty sure you're going to get no help unless you supply some helpful information.

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Problem with printing pages on my site...

Similar Messages

Maybe you are looking for