Problem with printing PDFs as 6 slides pr. page.

Hi!
I am having trouble printing PDFs as handouts with 6 slides on one page.
I go through all the settings for the printer, and the print comes out ok, but the slides are printed up side down and in the wrong order.
Even though I have set the order in the printer settings.
Anyone had the same problem?
Hope you can give me some advice.
Regards,
Elisabeth
PS! I do not have access to the original powerpoint presentation, otherwise I know I could print from that file...

Thank you, it worked!
Elisabeth

Similar Messages

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing pdf

IF POSSIBLE REPLY IN ITALIAN
HI, i ve got a big problem.
i 've to create an A0 page in vectorial pdf, which has connected different files: .psd files for the images with transparency, and vectorial .pdf for the drawings from cad.
When i ve created my page, i export that in print pdf high quality.
1° problem: sometimes it fails and tells me there s not enough memory
2° problem: when print pdf is created, the plotter can t load it to print, it stops at 40% loading.
there s a way to make an easy vectorial print pdf?
using vectorial eps instead of vectorial pdf?
using transparent tiff instead of psd?
THANKS

thank you for the fast reply Peter. Im working on an achitecture poster for my last exam, and it contains vector graphics sometimes overlayed on raster images.
i don t like to use illustrator too, im using 3 programs already to create this poster. do u think .ai are easier than eps???
i ve tryed to save new pdf without layers, but it didn t work. then i ve tryed to change pdf with eps on indesign, and now the print pdf saving is really faster. im gonna try to plot it and then i ll tell u what s changed.
OH most important, i was drag n dropping pdf into indesign, and i read it s really wrong! so now i import vector eps to indesign ...
Plot test...
TY

Troubleshooting problems with printing PDF's from Revit and Cad files

I am unable to print a readable pdf from AutoCad and Revit. Any Suggestions? I do not have problems with Microsoft or Adobe products..Just AutoCad. I have already spoken with my AutoCad dealer and they concluded it was an Adobe issue.

How was the PDF file created? With the Adobe plug-in to AutoCAD?
If you can provide some samples, we could look at the files and determine the problem. And FWIW, I doubt that your AutoCAD dealer has the competence to conclude where the problem is with a PDF file.
- Dov

Problem with print pdf and ordering book

Hi,
the function save as pdf, or print pdf, seems not working anymore: the pdf extracted in fact is empty (white pages). I have tried it on several books project, including some I had printed previously, with the same result. Any idea of the possible reason and how to fix it?
Also, if I try to order the book, my photo are visible (at least the cover) but I can't preview the whole book. And, when I try to purchase it, I've an error message saying that there is not enough memory for the book, please quit aperture and try again (tried, but no results).
Also, even more strange: I downloaded the latest update package, and when I launch it an error message appears that says "Aperture 3 or later version must be installed"... but I have version 3.1.1! So...
Can somebody please help?
Many thanks in advance,
cheers
Francesca
best
Francesca

Have you tried the tips shown at [Aperture 3: Troubleshooting Basics|http://support.apple.com/kb/HT3805] that might help.
Also, even more strange: I downloaded the latest update package, and when I launch it an error message appears that says "Aperture 3 or later version must be installed"... but I have version 3.1.1! So..
For the updates to work Aperture must be installed in the systems Application folder and be named Aperture not Aperture.3.1.1 or anything else. Is that the case in your situation?

Problem with printing pdf file created from Illustrator

Hello,
In a drawing I created with Illustrator 10.0.3 I covered part of a circle with a white rectangle (to make it disappear). I saved it as pdf. When printing the pdf (under Linux with a HP printer), the covered part reappeared. However the pdf-file is how it should be. Anybody knows what the problem is?

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing pdf file HP 845c windows 7

When I am printing a pdf file it is not printed well, the ink is grey and it is difficult to read.

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problems with printing a sheet in numbers - duplicates pages

For some reason, numbers is printing duplicates of my spreadsheet. The first sheet should be 9 pages long, but when I put it in print view, there are 27 pages - the 9 and then two copies of them. How do I delete the extra copies? I can't seem to find anything in Inspector and I don't have this problem on the other sheets, although each of the other sheets is only one page long.

Hi Laurie,
You can see how many tables you actually have by examining the Sheets Pane, on the left side of your Numbers window. You will have the Sheet Name and under it, if the disclosure triangle has been clicked, you will have the names of the tables on that sheet. How many are there?
Another way to see how many different tables you have is to temporarily change from Print View to Sheet View. I think that you will now see just one table.
My guess as to why you have repeated displays of the same four columns is that they are Header Columns and are repeating, because you told them to, on each page. In Print View on the leftmost page, you will see columns A, B, C, D and maybe a couple more. On the second page, you will see A, B, C, D and maybe a couple more, but different ones than at the right of the first page.
Take a closer look and tell us what you see
Jerry

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

I have installed Lion and have problems to print PDF from prewiev.

I have installed Lion and have problems to print PDF from prewiev. When trying to print Prewiev locks. Anyone out there with the same problem?

Hello David and Nicole
I just installed Lion on my iMac, which was purchased in 2007, and I cannot print from Preview; it keeps locking up and not responding. So, I have to force quit Preview. I have been sending error reports to Apple. I suggest everyone who has this problem, send error reports!
I can print from other applications, like Pages, with my Canon Laserjet. I do not think it is a printer issue becasue I can print in other application.
I took your advice and installed Adobe reader. Now I can print pdf's.
Thanks
Ed

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problem with printing PDFs as 6 slides pr. page.

Similar Messages

Maybe you are looking for