Problem with printing the correct "ical" pages.

G'day
I have only recently started using "iCal", on the cloud, having upgraded my laptops to "Lion" and my iPhone to "5", so that I have NOT experienced any of the "syncing" problems of which I have read elsewhere.
BUT, I do have an irritating problem, the solution to which, being a long-term Mac user, should be obvious.
The problem stems fronm the fact that I am located on the east coast of Australia, and my laptops know this.
The first, really daft, thing that I did was to create a whole lot of iCal entries, in iCloud, without noticing that the default timezone was "Pacific".
So, OK, I fixed that by going into my ID on iCloud and changing the timezone, and then editing every single event that I had entered at that point in time.
So, I then thought that I had beaten the beast, because I had only been printing "Weekly" calendars, which were OK.
Today, I decided to print some "daily" calendars, and the system WILL NOT PRINT THE CORRECT DATE.
My iCal entries are mainly to do with a trip that that starts on 1st August this year. I bring up iCal on the Mac, go to the print page, select 01 Aug 2012, and it prints 31 July 2012.
This happens whether I tick the "Timezone" preference in iCal on the Mac, or not.
What else should I do?
Dave the Desperate

Hi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.

Similar Messages

Word Stopped Printing the correct current page, prints page #1 instead

Word 2013 will no longer print the correct current page when asked to do so--it prints page 1 instead. There is no problem with the document(s) involved as they will print the correct current page with another user. If you highlight a selection,
it will print that correctly, except without the headers and footers. If you specify the section and page numbers, that also works (and the headers and footers come out OK). The print drivers are not the issue as the printer drivers
in question are on the print server and work as expected for other users.
Creating a new profile for the user does fix the problem, but only temporarily, in a week to 2 weeks the problem comes back. I am looking for a simpler solution than creating a new profile every week or 2 for the user.
I have tried the following steps without any success.
Deleted all the normal.dotm files from the computer and have
Deleted the Word Data key in the HKEY_CURRENT_USER|SOFTWARE\Microsoft\Office\15.0\Word.

Hi,
I first suggest you check the printer setting, since the problem may by caused by the incorrect printer mode. We can also try updating the printer driver to the latest to check the result.
Is the source file is openning in the Compatibility Mode? Whatever it is, please copy all of content from your current document to a new creating docx to check the result.
If the issue still persists, please try to repair Office from Control Panel -> Programs -> Programs and Features -> Office 2013 -> Change -> Repair.
Feel free to let me know if you have any other concern.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

Problem with Printing the Billing date...

Hi Experts...
Here im facing the problem in printing the billing date.
The scenario is as follows.
The posting date of Billing is 10.10.2008
The document date of Billing is also 10.10.2008.
At the time of printing the Billing document it is taking another date otherthan 10.10.2008,where it should be 10.10.2008.
What modifications should i do to rectify the problem.
Please advice.
Regards,
Y P.

Prasad,
Ask your ABAPer do debug and find out what date (Table-Field) is used in the Invoice Output program. You will know the reason and if you think that the date being used is incorrect, you can ask your ABAPer to change it to VBRK-FKDAT which is the billing date.
Chandan

Problem with printing the pages due to main window

hi experts ,
in my requirement i have 4 pages in smart form.It takes quotation number as input and dispaly all the contracts.
1 potrait
2 potrait
3 landscape
4 landscape
i have used a main window in the second page contains 2 windows for printing address then
one main window for printing contracts, and systems info in two tables .
i have used a main window in the 4 th page too for printing some item details equipment list.
both main windows having same width.
i am getting 1 st & 2nd pages only as o/p if i mention 2nd page in the next page field of first page .
i am getting 1 st 3 rd , 4th , 5th ........pages if i mention 3 rd page in the next page fileld of first page .
i didn't use any extra page to populate if 2nd page is filled completely .
please guide me .
Thanks & regards.
Srikanth

Hi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.

SMARTFORM: PROBLEM WITH PRINTING SAME HEADER IN PAGES FOR A NON-FINISH LIST

Hi, guys!
I hope you can help me as well as many other times.
I have a Smartform which contains a header,body and a footer in a page.
This is a form for a report, which we have a column header and the positions. the problem is that if a current account haven't finish in that list (see the example)
ASD
ASDASDASDASD
ASDASDASDASD
MY REPORT
ACCOUNT      | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |                <-- COLUMN HEADER
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |12.12            |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |123123.23    |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |123.1233      |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |21222.23      |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |123.23          |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |1212.12        |
PAGE 1
in the next page, we don't want to repeat the columns header. just only continue printing the lines...
ASD
ASDASDASDASD
ASDASDASDASD
MY REPORT
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |123.1233      |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |21222.23      |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |123.23          |
123123123     | xxxxxxxxxxx |xxxxxxxxxxx |xxxxxxxxxxx |1212.12        |
PAGE 2
Has anyone encourage this issue? What can I do? remember is a smartform.
please help us!!
thanx

Guys.
Remember that the columns header won't be printed only if the lines per account continues. I mean, the column header printing depends on the number of lines that are being printed.
If at the end of a previous page the list (for example the positions that belong to this account) still continues for an account, then in the next page the column header musn't be printed, just only continue printing the rest of the positions. As you notice this case would be found in any number of pages during the rest of the report.
I'm agree with all your solutions but this only functionin some cases for the first page.
I look forward to hearing from you.
If I'm clear now, please help me!
Thanks guys!

Problem with printing the sub totals

Hi,
I am having a problem with smart forms in printing the line items of invoice.
I need to print the sub total of each page and need to display the sub total in the footer, with the caption 'Balance C f/w'. It works fine in some cases.
In some cases, the sub total is getting printed wrongly, because its adding the amount of the next page's first line item also. I checked the form page by printing SFSY-PAGE along with the line item's text. It's observed that, the vlaue of SFSY-PAGE for the first line item's displayed in the second page is '1'. Due to this, the amount for this line item also is getting calculated with the sub total of the previous page.
Could you please suggest a solution for this problem?
Thanks & Regards,
John

Hi,
In smartforms, in the general attributes of the FIRST page the Mode for the page counter should be 'Initialize counter' and for the NEXT page it should be 'Increase counter'.
Please check this in your smartform.
Regards,
Ram

Problem with printing selection of web page

Print selection function from webpage don't print correctly. If text is marked then first line of text is printed not correct (printed only lower part of line). If text is longer than one page there is similar problem at the end of first page and begining of second. The problem occurs on HP LaserJet 4015 printer, and PDF creator too. Firefox 18.0.2 and firefox 19.0 , Windows 7 64bit

Hi mrbcl1, unfortunately the answer is that Firefox has some bugs when it comes to printing selections!
Typically, where the top of the selection is cut off, it means that Firefox is applying some style rules meant to position that part of the page on screen -- even though they are irrelevant when printing a selection. There's no built-in way to get Firefox to ignore those rules. You can try a different selection (keep more stuff above) or other interventions, but it can be a waste of time in many cases.
Here are two workarounds. In both cases, the idea is to isolate the selected part of the page (hide everything else) so you can print it ''normally'', bypassing the limitations of the Print Selection feature.
(1) Use the [https://addons.mozilla.org/en-US/firefox/addon/nuke-anything-enhanced/ Nuke Anything Enhanced extension]
See: [https://support.mozilla.org/questions/927457#answer-333518 When using print selection in Firefox 12.0, it prints wherever the selection is on the page (on paper) instead of at the top of the page (of paper).]
(2) Use a bookmarklet (snippet of JavaScript saved as a button on your bookmarks toolbar) to isolate the selection for printing.
This is the technique I generally use due to force of habit. The details are in [https://support.mozilla.org/en-US/questions/943039#answer-384875 this post].

Problems with printing the text in JTextPane

Hello
I need to print the text in a text pane. It prints the first page of the text pane and it doesn't print the rest of the text. I don't know what the problem is.
The code I am using, is below. I
Thank you.
LilyLay
import java.awt.*;
import javax.swing.*;
import java.awt.print.*;
public class PrintUtilities implements Printable {
private Component componentToBePrinted;
public static void printComponent(Component c) {
new PrintUtilities(c).print();
public PrintUtilities(Component componentToBePrinted) {
this.componentToBePrinted = componentToBePrinted;
public void print() {
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if (printJob.printDialog())
try {
printJob.print();
} catch(PrinterException pe) {
System.out.println("Error printing: " + pe);
public int print(Graphics g, PageFormat pageFormat, int pageIndex) {
if (pageIndex > 0) {
return(NO_SUCH_PAGE);
} else {
Graphics2D g2d = (Graphics2D)g;
g2d.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
disableDoubleBuffering(componentToBePrinted);
componentToBePrinted.paint(g2d);
enableDoubleBuffering(componentToBePrinted);
return(PAGE_EXISTS);
public static void disableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(false);
public static void enableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(true);

public int print(Graphics g, PageFormat pageFormat, int pageIndex) {
if (pageIndex > 0) {
return(NO_SUCH_PAGE);
} else {if (pageIndex > 0) return (NO_SUCH_PAGE)
prevents printing any more than the first page.
change >0 to >= numPages
Howard Amos

Problem with printing the code

Hi ,
I m having problems in printing my source code . I use emacs as a text editor. Is there any settings that need to be made before printing . Because when i try to print it didn't print my whole code. And when i try to print it from some where else it gives me error saying printer not found on LPT1. Is it something about the port or what. Plz tell me about it ASAP , because i need to submit my project.
Bye
Waiting for reply

Hello gotchya11,
If you are using a Unix environment, you can use the "lp" print command to send a document to printer. The "-d <device name>" flag is where you specify which printer to sent the document to. You can do a
"man lp"
from the command line to get more info on how to print. Perhaps you need to specify the destination where the file is to be printed. What you can do if you need to print the doc is to just copy and paste your code into a text editor and print from some other program if you are running Solaris CDE or Windows.
Hope this helps,
Ming
Developer Technical Support
http://www.sun.com/developers/support

Problem with printing the structure in ECC 6,0

Hi Everybody,
I'm working in upgrade project.
in 4.7 version, directly trying to print the work area and assign to some other fields.
Eg: write: Mara.
text = mara.
but in 6.0, its not allowing to assign directly like this.
\[removed by moderator\]
Thanks in advance.
Regards,
JaganMohan.
Edited by: Jan Stallkamp on Jul 29, 2008 6:54 PM

Now, you have to write the individual fields inside the mara stucture.
Regards,
ravi

Problem with printing the smrtform

Hi experts,
I want to print material number through smartform. i have a internal table containing material number and its quantity. I want to print particular material number for number of quantity times. it means if i have 3 rows in internal table , that means 3 material numbers are there and number of quantity is 50 for each material . so i want to print each material number for 50 times.

Hi Rupesh,
You can try following code.
Lets take an example of just one material number in your internal table.
what you can do here is create two similar tables with quantity & material number.
Loop at itab.
here capture the quantity field.
do < quantity times >
append the material numbers to the second internal table.
enddo.
endloop.
This way you can build an internal table with material numbers for total number of quantities.
Then use this table in your smartform.
Hope this helps.

Problem in Printing the ALV list

Hi,
I have one problem with printing the ALV list. While printing the ALV list(thro Print Icon on application Tool bar) ,Fist page of my print out contains some other inforamtion.
inforamtions included two tables
first table contains Sort Criteria, Ascdg, Descnd, Subtotal columns.
And second table contains Data statistics , number of
columns.
But from Second page onwards , my alv list printed correctly .
How can i avoid the First page inforamtion and
what is the Reason of coming like this?
Thanks,
Neptune.M

I assume you are using function module Reuse_alv_grid_display or reuse_alv_list_display for ALV.
If this is the case, there is a parameter called IS_PRINT that you need to supply while calling the function module.
you can for exapmle declare
data:
printstruc type SLIS_PRINT_ALV.
printstruc-NO_PRINT_LISTINFOS = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_PRINT = printstruc
There are many other flags in is_print structures that you can use to manipulate the printing.
Cheers!

HP C309a All in one Printer - Problems with printing documents the correct size.

Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer.
The HP printer prints well in post places but when I print from Excel on an A4 scale it only prints 3/4 size on an A4 page. I tried everything to get it to print the correct size. I have adjusted the settings to scale to A4, print boderless etc and it just will not print correctly.
It seems to be ok in Word and many other programs so I don't know why there is an issue with Excel. Iam I missing something, please help.
Also is there any way to default the printer to A4 automatically instead of 8" x 11".

I also have issues using this printer with Excel/ Word.
When I am using Excel or Word I have to remove the HP 309a as my default printer.
when set as default, excel and word just "hang" for up to 3 minutes when opening or saving.
I called HP who said the printer works with all other files so basically it's tough. One of their tech guys tried to sort it out but couldn't.
Has anyone else had this same problem? If so, how was it resolved?
£300 for a printer that doesn't work with MS. It's not funny and I won't buy HP product again.

Problem with printing ALV lists

Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.

Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format?

Problem with printing the correct "ical" pages.

Similar Messages

Maybe you are looking for