Problem with Printing through Deskjet F4288 on Network

Need suggestion to sortout the problem with HP Deskjet F4288 All in one Printer. This printer is installed on Windows XP OS System and when we try to give print on the network through other WinXp OS system then the spooler stopes working on the main system on which this printer is connected.

This sounds like the same issue on another post.
Here is one of the responses  from that thread:
"For those who still have this problem, I found the solution on this forum -thanks MP2000 (see http://h30434.www3.hp.com/psg/board/message?board.id=Networking&message.id=839#M839)
Go to the computer that the HP F4280 printer is connected to.
Click on Start --> Printer and Faxes
Right click on HP Deskjet F4280 and select Properties
Click on Advanced tab
Uncheck "Enable advanced printing features"
click OK
And it works!"
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Problem with printing through SAP

    Hi All,
    We have problem with printing, only one person through SAP can only print the documents successfully and the remaining are getting incomplete print output. This is happening only for transactions GD23 and FB03 (FI related transactions). We have tried with removing Saplpd folder and installing Sprint as suggested by SAP from note 894444. Still problem persists. Please suggest me in this regards.
    Veerendra Kumar.

    Hi Ardhian,
    We are using Front end printing and already installed SAP GUI new version i.e. 7.10.
    Only one user is able to print the document correctly from SAP, and other are getting incorrect print and getting error message "System cannot print the last 80 columns of the report" on one system.
    SAP version we are using is 4.7EE.
    Let me know if any more information needed for analysing the issue.
    VeerendraKumar.
    Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:35 AM
    Edited by: Veerendra Kumar Mutyala on Feb 20, 2009 5:37 AM

  • Printing Problem with Model HP Deskjet 2640 Series

    To Whom It May Concern, I am having problem with printing. There is always  a notification from the printer says" A footer of section list ser outside the printable area".Please advise. Thank you

    Hello @Tellen,
    Thank  you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
    First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
    If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. If you print a test page from the front panel do you see the same issue?
    I hope to hear from you soon.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Problems with printer and network connectivity

    So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
    Here's what I've checked/tried so far:
    All the wireless services are enabled on my printer and my mac
    I've reset the printing system on my mac, printer settings to factory defaults
    Restarted mac/printer/iPod
    Restarted router
    Reinstalled HP printing software that came with the printer
    All software is up to date
    Wireless printing on another windows computer does work
    Setting up wireless printing using the HP install disc doesn't work
    Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
    Printing over USB is problem-free
    When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
    More info
    MacBook Pro (13 inch, early 2011)
    Mac OS X Lion (10.7.2)
    HP Photosmart e-All-in-One B110a
    Router is a Huawei HG556a that I got from Vodafone NZ
    Thanks in advance!

    http://support.apple.com/kb/DL907

  • HP Officejet Pro 8600 "Problem with Printer or Ink System'

    A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
    A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

    Hi @Robin_Perth,
    Welcome to the HP Forums!
    I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
    I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
    If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Problem with printing a PDF

    Hi All,
    I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
    I have a problem with printing a PDF:
    I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
    with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
    Can anyone help me?
    I wish a great day to You all.

    Hi Ted Ueda,
    sorry for the delay of my answer.
    I understand very well the problems related to security.
    With the following code that I used to produce a report (PDF) at runtime,
    is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
    from RTF previously realized?
    ReportExportControl exportControl = new ReportExportControl();
    String report = report path;
    ReportClientDocument reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
    Object reportSource = null;
    reportSource = reportClientDoc.getReportSource();
    //The method setConnectionProperties() stores all the connection parameters in the collection
    //ConnectioInfos
    ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
    exportControl.setEnableLogonPrompt(false);
    exportControl.setEnableParameterPrompt(false);
    exportControl.setReportSource(reportSource);
    exportControl.setDatabaseLogonInfos(connInfos);
    //Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
    //ParameterFieldDiscreteValue
    setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
    ExportOptions exportOptions = new ExportOptions();
    //Set the export format (PDF)
    exportOptions.setExportFormatType(ReportExportFormat.PDF);
    PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
    exportOptions.setFormatOptions(PDFExpOpts);
    exportControl.setExportOptions(exportOptions);
    exportControl.setExportAsAttachment(true);
    try {
          exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
    } catch (ReportSDKExceptionBase e) {
    throw new ApplicationException("error code", ": error message"); }               
    As, however, I predicted in my previous message about the direct printing on the client,
    I read about ActiveX, but I don't know how to use them.
    I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
    "In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
    The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
    1)     AcroRd32.exe /p /h FILENAME
    where
    /p = print
    /h = hide window
    to print the report and
    2)     tkill AcroRd32
    to close Adobe Reader, because it doesn't end automatically after printing and the command  /h  is used just to minimize the process.
    I hope you can give me advice because I need to print directly on the client. Thank you

  • I had a problem with print preview of billing document.

    HI all,
    I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
    For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
    If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
    I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve  it.

    hi,
    for both the output types , r u using same sapscript or smartform?
    if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
    and if differect sapscript or smartform then you should not get such problem.
    you can check the sapscript or smartfrom in TNAPR table.

  • Problem with printing some report

    hi very body
    we have some problems with printing some reports.
    the problem is when printing a report the computer processes stoped
    and i should restart the computer a gain to print the report for first time and
    then in the second time i have same problem.

    Maher,
    You can check out the new printer driver test utility verions2.0 on OTN at:
    http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
    This should help you determine if it is a printer problem or whether you should look into another area.
    Also, you don't mention which version of reports, what command line options your using, the computer
    configuration your using whether it is a network printer or local printer connected to the machine. Support
    will need this information to help determine where your problem lies.
    Regards,
    The Oracle Reports Team

  • "Problem with printer or ink system"

    Hello, so this morning I printed out a paper and I saw I was almost out of black ink. I replaced the cartridge and everything was okay. When I went to print out another paper I received the error message "Problem with printer or ink system... 0x6100004e" I went to HP support and found a whole bunch of solutions. I went through the first few, there is no paper jams, but then I realized my carriage was either not leaving the dock or it would come all the way left just to go right back. When I open the door, its like the printer thinks the carriage is moving because it keeps turning the way it normally would. I tried resetting it, and looking up other solutions but nothing. My warranty was up in May. It had never had this problem when I changed the cartridges before, so I really need all the help I can get.

    Hi andre2015,
    Please perform the steps from the link below and this will resolve the issue.
    http://support.hp.com/us-en/document/c03253201
    ---- If my answer was helpful please click the Kudos star.
    If your problem is solved please click the Accept as Solution button so other forum users can use the solution.
    Regards
    Aneesh

  • HP 4622 All in One Printer: Problem with Printer or Ink System

    Problem with Printer or Ink System Error OXC19a0027.

    charleshia wrote:
    Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
    Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
    click the one which has the red box, it's where you insert the photo
    Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you  got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

  • Problem with printing pdf file

    hello,
    lately i have problem with printing pdf file:
    i click on the print button and the respod is very slow
    it takes more than a minute till the print window apears.
    i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
    other programs i'd working much faster.
    please advice,
    thank you

    No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

  • Problem with printing files created by tcpdf class

    Hello,
    I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
    http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
    Could someone try to print that example file at his Reader (printing to file .ps will be fine).
    I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
    Thanks in advance

    No problem with Adobe Reader 8 or 9 .

  • Problem with printing ALV lists

    Hey Guys,
    I have a problem with printing ALV lists ,
    I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
    it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
    How can i print  them all in one page?
    Thanks in advance
    Noha Salah.

    Hey Max,
    I tried setting the Layout-list_append  before my block_list_append function call
    And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
    is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
    to their original format?

  • Problem while printing through citrix

    Dear Gurus ,
    We are facing the problem during printing through citrix .
    When we print locally without using citrix  were able to get the proper print as it displayed in the spool .
    But When we try to take the printout of  document having say 12 colum , only 10 colums r coming asthe print out .
    Please suggest as the views on this issue are valuable
    Thanks in advance .
    Chirag Kohli .

    Hi
    I am facing same problem
    Please let me know if you get any solution
    Thanks
    Rakesh Patel
    [email protected]

  • Problem with printing graphics in SAP Script

    Hi,
    I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
    I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
    Plese tell me the solution.
    Thanks,
    Srinivas

    You need to check your printer settings.Might be drivers are missing.

Maybe you are looking for