Problem with printing to a Bluetooth printer from T60p
Hello,
I have a Thinkpad T60p ( 2007-93G) and up to now I had no problem with using my HP Deskjet 460 MobilePrinter via Bluetooth. However, a few days ago I updated my "Thinkpad Bluetooth with Enhanced Data Rate Software" to v. 5.5.0.6400, and since then I have not been able to use the printer via Bluetooth.
I investigated the problem by opening the printer Properties panel (right-click on printer icon; down to Properties), and at the same time the printer window (double-click on printer icon). In the printer properties panel I clicked on "Print Test Page", and then observed what was happening in the printer window. The test page appeared in the printer window, stayed for some time, and then was deleted. It appears that the printer software was sending the data somewhere, but the data never arrived at the printer. It would appear the the Bluetooth printer port is not working, or is configured incorrectly. I wonder if anybody else experienced a similar problem.
Regards,
bostjanv
Thanks for your reply.
I should have mentioned I am using Windows XP.
No, there are no eps graphics in the document.
Photoshop CS5 prints with no problems. I did a work-around by making a PDF and printing from that.
As I mentioned there was no problem printing from the CS4 version.
This may be a similar problem to the TWAIN problem in CS4.
Again Thanks,
Justin Kerr
Similar Messages
-
Problem with shares on Windows 2003R2 server from a Windows 8.1 PC
I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support -
I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.
Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup -
I have problems with activation, after delete mi Iphone from Icloud.
I have problems with activation, after delete mi Iphone from Icloud.
Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario -
Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.
how can i find out what the fix is that works..please
-
My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?
I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported. -
The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?
Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222 -
Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop
My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.
Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick. -
10.6.8 Printing problem with HP Photosmart premium C310 printer
I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed. -
Problem with the garbage record getting printed at the beginning
Hello Friends,
I know that this problem is very difficult to solve without looking at my script and its program. But I will try asking anyways.
I have written the following code (Driver program) which uses to tables ZRAMCUSTMAST AND ZRAMCALLMAST.
ZRAMCUSTMAST has customer details like address etc.,
ZRAMCALLMAST has the call details that each
customer has done.
But when I print the details, it prints everything correctly but for each customer it prints some garbage
values as the first row.
Any feedback will be greatly appreciated. You can mail me the response also (singer_ram AT yahoo DOT com)
CODE in my driver program (SE38) -
*& Report ZRAMPROJSCRIPT *
REPORT zramprojscript .
TABLES : zramcustmast, zramjuncmast, zramcallmast.
DATA : itabcustmast LIKE zramcustmast OCCURS 1 WITH HEADER LINE,
itabjuncmast LIKE zramjuncmast OCCURS 1 WITH HEADER LINE,
itabcallmast LIKE zramcallmast OCCURS 1 WITH HEADER LINE.
DATA: type_of_call(1),
CALL_CHARGE type i, CALL_CHARGE_STRING(5), TOTAL_CHARGE type i,
hour(2), min(2), sec(2).
SELECT * FROM zramcustmast INTO TABLE itabcustmast.
*SELECT * FROM zramjuncmast INTO TABLE itabjuncmast.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
dialog = 'X'
form = 'ZRAMPROJSCRIPT'
language = sy-langu
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT itabcustmast.
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
form = 'ZRAMPROJSCRIPT'
language = sy-langu
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
CODEPAGE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'MAINPAGE'
function = 'SET'
type = 'BODY'
window = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear itabcallmast.
refresh itabcallmast.
SELECT * FROM zramcallmast INTO TABLE itabcallmast WHERE customerid = itabcustmast-customerid.
SORT itabcallmast by calltype.
TOTAL_CHARGE = 0.
LOOP AT itabcallmast.
Local Call : 1 Rupee per Minute.
STD : 1.5 Rupees Per Minute
International calls : 5 Rupees Per minute
hour = itabcallmast-CALLDURATION+0(2).
min = itabcallmast-CALLDURATION+2(2).
sec = itabcallmast-CALLDURATION+4(2).
CASE itabcallmast-calltype.
WHEN 'L'.
CALL_CHARGE = ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) / 60.
WHEN 'S'.
CALL_CHARGE = ( ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) * 2 ) / 60 .
WHEN 'I'.
CALL_CHARGE = ( ( ( hour * 60 * 60 ) + ( min * 60 ) + ( sec ) ) * 5 ) / 60 .
ENDCASE.
CALL_CHARGE_STRING = CALL_CHARGE.
TOTAL_CHARGE = TOTAL_CHARGE + CALL_CHARGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'MAINPAGE'
function = 'SET'
type = 'BODY'
window = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP. " ************ itabCALLmast
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
CODEPAGE = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear itabcallmast.
ENDLOOP. " ************** itabCUSTmast
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.hi
good
check the following things-
1- Check the value for the field in the particular table,
2- Check the data you r passing from the driver program and the field that is printing the value in the sapscript screen.
3-check in the debug mode when the value is printing in the first row.
thanks
mrutyu -
Problems with hp officejet pro 8610 printing labels
I have a new HP offficejet Pro 8610 less than 6 months old. I was printing address lables (Avery 8160) and everything seemed fine after the first group then when I started the second set they were out of alignment I readjusted the paper and tried again to print and I get a message that there is a problem with printer or the the paper is not the wrong size for the job and its the same paper so thats not it I tried shutting everything down and starting over and it allowed me to print one and it was perfect but when I tried to print another it went back to same message wrong paper size I am still using same size paper I am using Avery 8160 labels and that is the size on the avery website I am printing from. Any help is much appreciated thank you.
Hello ,
Welcome to the HP Support Forums!
I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
I hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Problem with installing HP LaserJet 1102 printer driver
Hi there,
I have got realy annoying problem with printer driver installation on HP LaserJet 1102.
Basically I downloaded driver from the website and tried to install printer. When the installation is almost done, the message pops up(image attached).
I've checked printer spooler service, tried almost everything.
Any suggestions/ideas?
Thanks
MinhoquinhoI would suggest going into your control panel and uninstalling everything associated with the p1102, rebooting your computer and trying a fresh install.
If this does not solve the install issue, please repost and error message along with your OS so that we may better help you.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution -
Problem with HP 3600n Color Laserjet Printer and new HP Notebook Running 64 bit Win7
I have a new HP notebook (dv7t-6100) with Core-i7 Processor, running 64 bit Windows 7 with all of the latest updates.
I also have a 27" iMac with Core-i7 Processor running 64 bit Windows 7 underneath Parallels 7. Parallels is a program that creates a virtual machine underneath Mac OSX.
Both versions of 64 bit Windows 7 work perfectly . . . EXCEPT, neither will print from my HP 3600n Color Laserjet. The iMac will print to the 3600n in OSX mode, and an earlier version of 32 bit Windows 7 under Parallels printed perfectly with this 3600n printer.
These facts prove that the printer is OK, the connection is OK. However, the 64 bit Windows 7 systems do not print.
In both of the 64 bit Windows 7 installs I allowed Windows to find and download the HP driver for this printer. Install of the driver was apparently successful. Still no printing.
One strange fact: Sometimes when I turn the computer off, the 3600n printer will print the items that had been in the queue before powering down. That is the only time it has printed anything . . . except under OSX on the iMac.
Does anyone know if there is a basic problem with 64 bit Windows 7 and this printer ?
Thanks for any help you can provide.I just had the same problem with my MacBook Pro using 10.5.5 After trying a number of things, the following worked. (not sure what specifically ... just did this combination)
1. Had the Apple store Genius Bar folks install the latest HP drivers.
2. Restart computer
3. Restart the HP Color LaserJet 3600
4. Connected the HP printer and MacBook Pro directly into a switch, so the wireless was not an issue (both machines had IP addresses set and computer's was set to DHCP with manual IP).
5. Instead of using the System Preference printing and fax tool, I started Text Edit, typed something and said "print".
Print window came up and said "no printer selected"
6. I clicked on the drop down so it would look for printers.
7. It found the HP Color LaserJet 3600.
8. I clicked on the name of the printer and the computer went out and found the driver
9. I clicked on "Add" and it added the printer.
10. I tried a couple of test prints in different programs.
11. I disconnected the hard wired ethernet cables and set the computer to be on the wireless.
12. I printed a few more test prints in various programs.
I had previously tried selecting the printer and drivers through the System Preferences to no avail, but doing it this way worked.
Blessings -
Problem with dashed line spacing when printing to pdf
Hi all,
this may be a problem with my pdf program (I use bluebeam), but maybe someone will have an idea how to fix it whether in indesign or bluebeam.
so I made a dashed line using the stroke command in indesign. I need to have the spacing set to 3pt dash and 2pt space. I also need to keep the lineweight to 0.5...this all works fine and appears correctly in indesign when I preview
the problem is that some of the dashed lines, but not all of them, change size and spacing in the pdf when I view it. it seems to change when I zoom in and out as well. I thought maybe this was just some odd feature with bluebeam and it would still print to the correct size, but it does not, it prints the lines as different sizes. does anyone have an idea why this happens and how to fix? ive viewed and printed from adobe reader and it seems to be okay there but this file will be accessed by multiple other people and they may not be opening and printing in adobe reader..
thanks guysWhen you export a PDF you will notice that you are exporting to Adobe PDF. Using any reader beyond Acrobat Pro or Reader is a crapshoot.
For issues with Bluebeam I suggest you contact the developer.
Maybe you are looking for
-
How to populate the time component of a cube?
We have a question regarding how to populate the time component of a cube. Let me explain: We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for
-
Using one Cursor data in anothe rcursor
Hi all, I have a requirement of processing the following. I have to select the rows for which few selected attributes are null. Then I need to take one more attribute for these rows and check that if the value of that row exists for any other row exc
-
Photoshop creative suite 5.5; error message "stopped working"; twain install failed;
I am at the end of my rope, I am about ready to uninstall the whole thing and install Corel. With the latest update of Windows, my Photoshop stopped working. I tried to download and place the twain drivers that the directions told me to, but the down
-
Substitution for DB link in Interactive report
Hi, Is it possible to use substitution strings for DB link in Interactive report in same way like it works in Classic reports (by choosing Generic column) or in any other way. Currently when i'm trying to put SQL like : select empno, empname from emp
-
Hi All, I hav created a Business process. when i modified that process, it is not getting reflected in the SXI_CACHE. No matter how many times i activated it, it is not getting modified. i tried for around two hours and restarted the server again as