Problem with printing to a HP Photosmart Premium C410

Printer purchased and installed on July 9, 2011. Connected wirelessly to a D-Link Xtreme N GIGABIT  Router  Model   DIR-655. Router IP address 192.168.0.1
The printer worked fine until last week. Then one of our Laptops could suddenly not print or scan anymore.
There are Two Dell Laptops connected to the same router.
The first Laptop, Dell XPS M1530 running Windows Vista Home Premium Service Pack 2, 4GB Ram 32 bit OS. This machine can print to HP C410 printer directly with no problems. It can see the printer’s embedded web server at 192.168.0.254 and can scan from there into a file on the laptop or can print the just scanned image from the embedded web server.  It can also print to it using HP eprint.
The second Laptop, Dell Inspiron M1545 running Windows 7 Home Premium Service Pack 2, 3GB Ram 64 bit OS. This machine CANNOT print directly to the HP printer.  It can see the printer’s embedded web server at 192.168.0.24 and can scan from there into a file on the laptop (I used a PDF format and brought it up in Adobe Reader to be sure) but it CANNOT print the just scanned image from the embedded web server.  The print process fails and shows the document still in the spool queue with an error status. It can print to the HP C410 using HP eprint.
I have used the HP suggested process of uninstalling all the printer software and re-installing it from the original CD (tried this three times) and by downloading it from www.hp.com. I have also installed the HP fix titled: Following a Network Installation, the Product Loses Functionality and Is Missing from the Devices and Printers Menu after the Computer Is Restarted in Windows 7 (64-bit Only)  
I installed the fix after a complete un-install / re-install cycle.   I have run the HP Print Diagnostic Utility at this point in the process and it returns a clean (All Green Check Marks) report but its final test print fails in the same manner.  
Thanks in advance for help in solving this problem.

So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

Similar Messages

  • Elements 9 will not print to my HP Photosmart Premium C410.

    Elements 9 will not print to my new printer. When i try I get the "send a fax" page. PS sends the job to the print spool for the fax. When i select the printer in the print page it sometimes tell me it can't print until I install a printer. Only way to change that is to close PSE and then reopen but still no printing. Does anyone have any ideas?

    xqzdust wrote:
    I can't change the name in devices and printers.  I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
    Open Devices and Printers.
    Right-click on the icon for the printer and select "Printer properties".
    Click the "Change Properties" button on the lower left of the dialog.
    Enter the Administrator's password when prompted.
    On the "General" tab in the next dialog, you can change the name.
    From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
    Ken

  • I have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • Problems with printer and network connectivity

    So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
    Here's what I've checked/tried so far:
    All the wireless services are enabled on my printer and my mac
    I've reset the printing system on my mac, printer settings to factory defaults
    Restarted mac/printer/iPod
    Restarted router
    Reinstalled HP printing software that came with the printer
    All software is up to date
    Wireless printing on another windows computer does work
    Setting up wireless printing using the HP install disc doesn't work
    Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
    Printing over USB is problem-free
    When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
    More info
    MacBook Pro (13 inch, early 2011)
    Mac OS X Lion (10.7.2)
    HP Photosmart e-All-in-One B110a
    Router is a Huawei HG556a that I got from Vodafone NZ
    Thanks in advance!

    http://support.apple.com/kb/DL907

  • Adobe PSE9 won't recognize HP Photosmart Premium C410 Printer

    My HP Photosmart Premium C410 works with all my applications except Photoshop Elements 9 - which is kind of handy for an imaging program!!  The printer is definitely correctly selected, as verified from Control Panel - Printers and Faxes.  In PSE, under "Print", the first item is "Select Printer".  I have selected "HP Photosmart Prem C410 series", which is the second line in the option list. The first line is very similar, being "HP Photosmart Prem C410 series fax".  Every time I try to print something, it starts the fax process.....    Nothing I try seems to get it onto the printer, rather than the fax.  Any advice gratefully received.

    Hello,
    PSE9 takes some initial number of character to recognize a printer and send print action to the printer.
    In your case both your printer and Fax has same initial name, in such situation PSE get confused. In such situation to come over of this issue do one thing :-
    Rename your printer name to some otehr name and then try printing.
    For more reference you can go through this post also :-
    http://forums.adobe.com/message/3272408
    cheers
    Sam

  • HP Officejet Pro 8600 "Problem with Printer or Ink System'

    A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
    A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

    Hi @Robin_Perth,
    Welcome to the HP Forums!
    I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
    I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
    If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP 4622 All in One Printer: Problem with Printer or Ink System

    Problem with Printer or Ink System Error OXC19a0027.

    charleshia wrote:
    Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
    Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
    click the one which has the red box, it's where you insert the photo
    Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you  got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

  • Problem with printing a PDF

    Hi All,
    I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
    I have a problem with printing a PDF:
    I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
    with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
    Can anyone help me?
    I wish a great day to You all.

    Hi Ted Ueda,
    sorry for the delay of my answer.
    I understand very well the problems related to security.
    With the following code that I used to produce a report (PDF) at runtime,
    is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
    from RTF previously realized?
    ReportExportControl exportControl = new ReportExportControl();
    String report = report path;
    ReportClientDocument reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
    Object reportSource = null;
    reportSource = reportClientDoc.getReportSource();
    //The method setConnectionProperties() stores all the connection parameters in the collection
    //ConnectioInfos
    ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
    exportControl.setEnableLogonPrompt(false);
    exportControl.setEnableParameterPrompt(false);
    exportControl.setReportSource(reportSource);
    exportControl.setDatabaseLogonInfos(connInfos);
    //Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
    //ParameterFieldDiscreteValue
    setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
    ExportOptions exportOptions = new ExportOptions();
    //Set the export format (PDF)
    exportOptions.setExportFormatType(ReportExportFormat.PDF);
    PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
    exportOptions.setFormatOptions(PDFExpOpts);
    exportControl.setExportOptions(exportOptions);
    exportControl.setExportAsAttachment(true);
    try {
          exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
    } catch (ReportSDKExceptionBase e) {
    throw new ApplicationException("error code", ": error message"); }               
    As, however, I predicted in my previous message about the direct printing on the client,
    I read about ActiveX, but I don't know how to use them.
    I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
    "In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
    The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
    1)     AcroRd32.exe /p /h FILENAME
    where
    /p = print
    /h = hide window
    to print the report and
    2)     tkill AcroRd32
    to close Adobe Reader, because it doesn't end automatically after printing and the command  /h  is used just to minimize the process.
    I hope you can give me advice because I need to print directly on the client. Thank you

  • Problem with printing pdf file

    hello,
    lately i have problem with printing pdf file:
    i click on the print button and the respod is very slow
    it takes more than a minute till the print window apears.
    i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
    other programs i'd working much faster.
    please advice,
    thank you

    No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

  • Problem with printing files created by tcpdf class

    Hello,
    I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
    http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
    Could someone try to print that example file at his Reader (printing to file .ps will be fine).
    I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
    Thanks in advance

    No problem with Adobe Reader 8 or 9 .

  • HP Photosmart Premium C410 suddenly stopped wireless printing

    My  HP Photosmart Premium C410 all in one printer was working fine and than just stopped allowing wireless printing.  If I eprint by sending an email to the print it works.  My wireless connection has no issues and the printer says it's successfully setup.  Any suggestions? 

    Because e-print works, that indicates that the printer is connected to your wireless network.
    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...  Let me know what it says.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problem with printing ALV lists

    Hey Guys,
    I have a problem with printing ALV lists ,
    I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
    it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
    How can i print  them all in one page?
    Thanks in advance
    Noha Salah.

    Hey Max,
    I tried setting the Layout-list_append  before my block_list_append function call
    And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
    is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
    to their original format?

  • I had a problem with print preview of billing document.

    HI all,
    I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
    For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
    If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
    I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve  it.

    hi,
    for both the output types , r u using same sapscript or smartform?
    if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
    and if differect sapscript or smartform then you should not get such problem.
    you can check the sapscript or smartfrom in TNAPR table.

  • Problem with printing graphics in SAP Script

    Hi,
    I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
    I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
    Plese tell me the solution.
    Thanks,
    Srinivas

    You need to check your printer settings.Might be drivers are missing.

  • Problem with printing from Acrobat Reader XI

    SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
    It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
    Does anyone know what can be the problem?

    No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
    I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there.  I copied them by adding -COPY before .joboptions in the name.  Now they appeared in  Printing Preferences with the -COPY added.
    I tested a print from Word (using File / Print), but was not prompted for the filename or location.  I checked my entire system and couldn't find the PDF file anywhere.  I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
    I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
    After several days and hours, I gave up and installed Acrobat X on the W7 computer.  I can still use Acrobat XI on the W8 computer.  So be it!
    Thanks anyway for your attempts to help.

Maybe you are looking for