Problem with Process 2012 in Bridge CS5

I can't use Process 2012 in CS5 Bridge. It always makes me go back to 2010. I think I have the latest ACR, and use this in LR4. Anyone else experience this?
Thanks,
Dave

As far as i know process 2012 was only in camera raw 6.7 to make cs5 compatible with images sent from lightroom 4 to photoshop cs5, but you can't adjust
any of the process 2012 adjustments in camera raw 6.7.
Of course photoshop cs6/cc is fully process 2012 enabled, so one can do all the adjustments that are missing in camera raw 6.7
(camera raw 7.x and 8.x)
more info:
http://forums.adobe.com/message/4260541#4260541

Similar Messages

Problems with Image Processor in Bridge CS5

I just installed Photoshop and Bridge CS5, and I'm having a couple of problems. First, I can't update to Bridge 4.02. I've downloaded the installer and tried to run it, but I get an error message. All it says is that it can't run the update. The same thing with the Camera Raw updater. The most immediate problem I'm having is that Image Processor in CS5 seems to run differently from how it runs in CS4. Specifically, if I select a bunch of files in Bridge, and ask Image Processor to run an action on them and save to the same location, which is what I've been doing ever since CS2, it opens the files in Photoshop, and leaves them open. This means that pretty soon I've got far too many fiiles open, and my Mac can't cope with it (an iMac Core Duo 2.16Ghz with 4 GB of ram). It also gives me an error message at the end saying it can't process the relevant files, even though it has processed them! In previous versions of Image Processor, it would open the files to run the action, convert to sRGB, etc. and then close each one after saving it to a new folder named "JPEG". How can I get the latest version to behave like this?

Nevermind... I restarted Flash and it miragically appeared! Yay CS5!

Problem with Adobe Aplication Manger/Updater cs5

i have just installed my CS5 Premium on my new (purchased used) macbook pro after a clean install (OSX 10.8.5)
All the programs works fine but the Aplication Manger say there is updates for all the programs so i open it and and start the updates
it downloads as it shud (according to the progress bar) but when i shud install the updates it gives me the following error messages:
The following updates where unable to install. If you whiz to install these updates, pleas fix the problems below an retry:
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
I have tryde quitting and tryde again several times with no luck
Anny ideers on how to fix this ?

My Application Manager says somthing else. It's downloading the updates but then the installation fails. Normaly I can live without the upgrades, but my Camera RAW format is not compatible with the old version of Cameraw Raw and I realy need ad least this one.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Problem with Text tool in Photoshop CS5

I just purchased PCS5 this morning and they told me that I should download the trial version till I get the actual CDs... I have Photoshop CS4 and never had any serious problems. After downloading and installing CS5 it seems everything is working ok... however there are 2 problems...
1. It does not interact with Bridge 4 (when I make changes in Bridge, CS5 does not see it)
2. Any time I try to click on 'TEXT' tool icon, the application crushes... and I cant do anything... I have to restart the application.
Dont care much about 1st problem, but can't do without the 2nd one....
Any ideas?
Thanks a million in advance

Hi
Have you tried following solutions?
- update Photoshop to 12.0.4
- remove bad & duplicated fonts and clear system font caches
- update or uninstall 3rd party font management application
- remove all 3rd party plugins including font management application plugin
- launch Photoshop 32bit mode
- upgrade your Mac OS
If above solutions don't help, please contact me ([email protected]).
Thanks,
Kyoko

Multiple problems with my 2012 Retina Macbook Pro

Hi,
I just got my 2012 Retina MBP with 16GB RAM and 768 GB HD. OS X Lion 10.7.4 is running and all requisite updates are installed. I am quite surprised at what I think are bugs that are associated with this MBP. Here are my issues. Hopefully someone can assist. Today being the 4th of July, their phone support is offline.
1. The trackpad does not work well after I open the trackpad app via preferences. I cannot scroll or do Mission Control or Expose for instance.
Yes, I have installed the following update to no avail: http://support.apple.com/kb/DL1543
No, I do not see the "Macbook Pro Trackupade Update" as described within the following article: http://support.apple.com/kb/TS4297? viewlocale=en_US&locale=en_US
2. Whenever I swipe with my 4 fingers to get to the next screen, the screen darkens and becomes completely black. This is highly unusual and does not happen with my Macbook Air or my imac.
3. I have about 4 Safari windows running on seperate screens and this seems to bring my machine to a crawl. This again has never been a problem with my MBA or my IMAC.
Pls Help!!
P.S. I will pay the "Geniuses" a visit tomorrow.

Regarding point#2:
The Safari issue has abated however I observed that the "Windowserver" process is consistently taking up 90-100% of the CPU and thus bringing my machine to a crawl. It seems like others are experiencing similar issues. Here is one instance where this person's "windowserver" process is crashing.
https://discussions.apple.com/message/18817381#18817381
This is very disappointing and underwhelming.

Problem with using mouse scrollwheel within CS5?

Hey all. Just upgraded my PS from CS3 to CS5, and I seem to be running into issues with the scrollwheel on my mouse.
When trying to use it from inside CS5 (say, inside a long 'Open...' window), it seems to lock up the entirety of Photoshop for a moment or two every few seconds. Checking the net out there, it looks like there appeared to be a problem with mouse wheels, but that was supposedly fixed nearly a year ago.
I checked for any updates or patches, but the most recent update I can see on the Adobe site is to 12.0.4, which has me doubly confused, as my copy of CS5 say that it is version 12.1, which, theoretically, is a more recent copy...?
I can provide system info, etc. if needed, but since I have not found anything along these lines since a year ago, I'm guessing there's probably some simple thing I'm missing somewhere.
Thanks in advance,
Steve M

You mean Photoshop plugins? No, the version of CS5 I'm having issues with is fresh as a daisy, just digitally downloaded and run for the first time earlier today. I think my old copy of CS3 has some, however, although since they are not being loaded into CS5 (presumably) I'm guessing those wouldn't be the culprit. If this helps any:
Model Name: Mac Pro
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
L2 Cache (per processor): 12 MB
Memory: 4 GB
System Version: Mac OS X 10.5.8 (9L30)
I'm using a Logitech Performance Mouse MX.
Thanks,
Steve M

Problem With File Crashing in Photoshop CS5

Hello I have a design file that I just created in Photoshop CS5 last night. I went in to do some editing today and it keeps craahing within a few seconds of being opened. I have never had this problem with a file before and I need it to turn in at work. ANy helpful ideas out there on what may be happening? It's happened at least twenty times now....

If you do a search, you will find several threads dealing with file corruption in CS5/ CS5.1. The long and short of it is, that the file is a goner, but feel free to try things like opening it in another program (Art Rage, Corel Painter, GIMP) or image viewer (XnView, ACDSee) to recover at least parts of it...
Mylenium

Install problem with Quicken 2012 on Windows 8.1

I have two new computers with Windows 8.1. One is an HP laptop on which I had no trouble installing and using Quicken 2012. Now I want to install the same program on my Lenovo desktop. It is in the form of an exe file downloaded from Amazon. When I execute
it (as Administrator) the installer gets as far starting to disassemble the files for a second or two and then just disappears. I get no error indication, no message and find no trace of the installation files. I don't know what temp file is being used. I
find nothing in the logs either. I have tried the same file used on the HP and even re-downloaded from Amazon.
Other than this the computer runs fine. I have successfully installed half a dozen other programs with no problems.
Quicken 2012 is listed as being compatible with windows 8.
I would appreciate any suggestions on how to further troubleshoot this problem.

Hi,
The installation issue can be caused by several reasons, please try following steps to check the issue:
First, let's boot into Clean boot mode to avoid 3rd part conflict:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Then, try to unzip the exe file and install the msi package:
Please refer to the steps here:
http://quicken.intuit.com/support/help/downloading--installing--upgrading-and-converting/error-1911-or-1935-installing-of-quicken/GEN83111.html
If the issue still persists, please provide event log as below for our research. Please upload it to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

Problem with Light Table in Bridge CS6

Hi! After a re-install (which didn't fix the problem with PS), I now find that, when using the light table in Bridge CS6 and after hitting the space bar, if I then click on the image, it goes to 800% size! Prior to the uninstall & re-install, it worked perfectly in taking images to 100% size.
Hope someone can help.......
Thanks, Wardie

Why did you reinstall photoshop cs6?
What operating system are you using?
Did you reinstall all the updates for photoshop cs6 by going to Help>Updates from within photoshop cs6?
After you enter the light table, use your mouse scroll wheel to zoom back to 100% and exit the light table.
The next time you go to the light table and click on the picture it should only go to 100%.

Problem with fading out particles in cs5

I have a problem with fading out particles or anything for that matter in my CS5 after effects! I set up the key frames right. O opacity at first and whatever number at next and it fades in fine, But when I try to do the reverse it will not fade out and only stops the effect if I cut its durration at the red par representing it on the top of the time line. This produces and rough aburpt cut of the effect which will not due. Please can anyone tell me what I am doing wrong that I can't fade out particles with opacity?

First question: What OS and what's the build of CS5.5?
Second question: What effect are you using? There are a bunch of ways to generate particles.
Last question: if you turn off the effect can you get the layer to fade out? Pressing Alt/Option + t will set a keyframe for opacity on your layer and reveal the keyframe in the time line. Do that, set the value to 0, then move down the timeline a few frames and set the value to 100. This should generate another keyframe. Now move down a few more frames and press Alt/Option + t or change the value for opacity to anything and then back to 100, or copy the previous keyframe and paste to set a 3rd keyframe. Finally move down a few more frames and set the value to 0. You should have 4 keyframes in your tlimeline for opacity. If you want to clean up the layer press Alt/Option + ] to set the out point for the layer.
Everything should work just fine. Turn on the effect and your layer and the effect should fade out.
If you want to do something else with the particles, like fade out a particle over the lifetime of the particle we'll need to know which plug-in you're using.

Problems with the 12.0.4 CS5 update aka poor support

In my 30 years as a technical support director for national and global companies I would have been fired long ago if the customer suport I provided was as bad as this has been. Love the products -- regret the support.
Since updating to 12.0.4 from 12.0.3 a number of 3rd party plug-ins have stopped working. In talking with the respective plug-in support teams they report that some of the conduits that pass information between LR3.4 and CS5 (12.0.4) are broken and that they are attempting to fix them.
I have now been on a weeklong thread with Adobe support in which offshore support offers me canned responses and never read my responses. Case in point. In my last interaction over the last few days I've asked how to revert back to 12.0.3. Instead of a direct answer they offered another solution to the problem.
Anyone else had similar issues? The problems I'm having issues with are NIK and OnOne plugins -- not all of them but just a few. I'd reinstall from my original disks but the I'd be back to 12.0.0.

I see some indirect problems with OnOne Software's Perfect Resize product.
I have been planning to send them a note, though I imagine they're already aware of the problems.
-Noel

Problems with IE w/ Apache bridge

We're recently switched over from IIS as our front end web server to Apache
1.3.12. On our login page for one of our site using IE 4.x / 5.x, we've
noticed this to be extremely slow (about 45 seconds) just to login. Once
you login to the site, the site is very fast. However, this is not the case
with Netscape (4.x/5.x). Netscape works fine all of the time and is very
fast with Apache.
Is there a known bug with IE?
All our login page does is pass username & password parameters to the
weblogic server.
This site doesn't have any problems with Netscape, going directly to the WLS
on the specified port, or when we used IIS. The only time this shows up is
when a user would login. Once they're in, they're flying!
This is only IE related. Is there some sort of odd setting in IE to hold up
a form like this?
Our config looks like this:
Web server: Linux 7.0; Apache 1.3.12 + apache-linux-bridge-sp5
Weblogic Server: Windows 2000, WLS 5.1, sp5
Database
Has anyone seen this before?

Thanks for the help everyone, but BEA sent us a beta-version of the new
proxy for Apache on LINUX. This fixed the problem, and should be fixed in
the next service pack.
"mreiche" <[email protected]> wrote in message
news:3a19ee1e$[email protected]..
>
See this article - we found a similar problem due to a sendRedirect() andfixed it by using a jsp:forward
instead.
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.develo
per.interest.jsp&item=3835&utag=
>
Mike Reiche
"Charlie Crook" <[email protected]> wrote:
Is the delay in loading your login page within the browser, or after the
user submits it?
Does the page contain IIS extensions ( which are no longer needed )?
"Mike Kendzierski" <[email protected]> wrote in message
news:3a120fa3$[email protected]..
We're recently switched over from IIS as our front end web server toApache
1.3.12. On our login page for one of our site using IE 4.x / 5.x,
we've
noticed this to be extremely slow (about 45 seconds) just to login.Once
you login to the site, the site is very fast. However, this is not thecase
with Netscape (4.x/5.x). Netscape works fine all of the time and is
very
fast with Apache.
Is there a known bug with IE?
All our login page does is pass username & password parameters to the
weblogic server.
This site doesn't have any problems with Netscape, going directly tothe
WLS
on the specified port, or when we used IIS. The only time this shows
up
is
when a user would login. Once they're in, they're flying!
This is only IE related. Is there some sort of odd setting in IE to
hold
up
a form like this?
Our config looks like this:
Web server: Linux 7.0; Apache 1.3.12 + apache-linux-bridge-sp5
Weblogic Server: Windows 2000, WLS 5.1, sp5
Database
Has anyone seen this before?

Problems with processing files uploaded from Safari browsers

I have a jsp that allows users to upload files via a secure form and the standard html <input type=”file” … > tag.
For complex reasons I need to get the contents of the HttpServletRequest into a character array. Basically my code looks like this:
BufferedReader reader = request.getReader();
char[] ba = (char[]) Array.newInstance(char.class, MAXFILESIZE);
int total = 0;
int charsRead =0;
while ((charsRead = reader.read(ba, total, 1024)) > -1)
total += charsRead;
When the request is submitted by a Safari browser, approximately 70% of the time, the very first reader.read does not return a result. After about 2 minutes, I get a SocketTimeoutException. On the client side, Safari shows a “loading ….” Message and after 5 minutes reverts to a blank screen – unsurprisingly since the server never serves up a response.
By way of comparison, when the transaction is successful, the process takes less than 1 second.
java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java(Compiled Code))
at com.ibm.ws.io.Stream.read(Stream.java(Compiled Code))
at com.ibm.ws.io.ReadStream.read(ReadStream.java(Compiled Code))
at com.ibm.ws.http.ContentLengthInputStream.read(ContentLengthInputStream.java(Compiled Code))
at com.ibm.ws.io.ReadStream.read(ReadStream.java(Compiled Code))
at com.ibm.ws.webcontainer.http.HttpConnection.read(HttpConnection.java:342)
at com.ibm.ws.webcontainer.srp.SRPConnection.read(SRPConnection.java:200)
at com.ibm.ws.webcontainer.srt.SRTInputStream.read(SRTInputStream.java:80)
at com.ibm.ws.webcontainer.srt.http.HttpInputStream.read(HttpInputStream.java:312)
at java.io.InputStream.read(InputStream.java(Compiled Code))
at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java(Compiled Code))
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java(Compiled Code))
at java.io.InputStreamReader.read(InputStreamReader.java(Compiled Code))
at java.io.BufferedReader.fill(BufferedReader.java(Compiled Code))
at java.io.BufferedReader.read1(BufferedReader.java(Compiled Code))
at java.io.BufferedReader.read(BufferedReader.java(Compiled Code))
This problem occurs regardless of file size and even if Safari is told to report itself as firefox. This problem has not once occurred with any of IE 5,6 or 7 or Firefox 1.* and 2.*
I have not been able to test this with Safari 3 Beta for Mac or Windows.
Environment:
Client is Mac OS-X 10.4.10 with Safari: 2.0.4
Server is Websphere 5.1

Since a few hours, I have the same problem like you. I uninstalled Firefox, because I thought it was a problem with it, but then i started Safari to redownload Firefox and guess what happened.. nothing. I can't download anything. don't know why. does anyone know whats wrong??

Problem with Process 2012 in Bridge CS5

Similar Messages

Maybe you are looking for