Problem with process order resource selection condition

I face a problem while trying to release process order as i am getting an error as "Resource XXXX assigned to operation 20 does not meet resource selection condition".What may be the reason for this.how to check and rectify...
Please help.

hi,
I think you have been using a work center in place of resouce.
Actually
Resource catagory = 0008 is assign to Application C (Recipe) & only use in Recipe Creation.
Work Center catagory = 0005 is assign to Application N & R( Routine & Refernce operation set) & only use in Routine Creation.
Parminder

Similar Messages

Problem with Process Order Scheduling..

Dear Experts,
i'm stucking with the scheduling of a process oreder.
I've maintained all scheduling parameters into OPUZ except "selection ID" for detailed scheduling as it is grey & not allowing to fill any entry into it.
I've also maintained production scheduler and other relevant settings into master recipe & resource regarding scheduling .
Still i'm getting the error"Scheduling parameters for process orders have not been entered" message no CT609.
Kindly help me out , where i'm wrong
Thanx in advance...

Dear Dennis,
Ensure the scheduling parameters in OPUZ for the order type,plant combination and for all (* )scheduler you have maintainied
the scheduling type,the check box for scheduling and generate capacity requirements under detailed scheduling is set.
Check and revert back.
Regards
Mangalraj.S

Problem with process order settlement

Hi,
I'm having a problem while doing settlment for process orders. I have two types of process orders AJWV and AJW0; AJWV works for center 2000 and AJW0 works for center 1000. When I calculate variances both work good. The problem comes when I try to settle them. For AJWV orders there are three finance documents generated, FI document, Controlling document and Profit Center document. But for AJW0 it's just generated Controlling document and Profit Center document.
Both order types have the same settlement profile assinged
The settlement rule for both orders is to Cost Center, full settlement 100%
Both orders are produced for Sales order with valuated stock
I already checked the account assigment for the materials corresponding to each order, and both account determination are ok.
What can be the problem so the AJW0 is not posting to FI variances?
Thanks

Hi,
Yes for AJWV the FI entry was generated.

Query on resource selection condition

Hi All
I have a process order with a operation having a resource selection condition.In the classification of the master recipe i have entered the resource name(as characteristic value) as X whereas the name of the resource where the operation is to take place is A and in the classification of the resource A i have enter the characteristic value as "A".
Now is it possible to release the process order without getting the error message :"Resource in operation does not satisfy resource selection condition".
please advice.

Hy,
Kindly go through below link it might be give some inputs if some data is missing in your condition.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/89/a42678461e11d182b50000e829fbfe/frameset.htm]
Regards,
Dhaval

I have Problem in Process Order ,

Dear , I have Problem in Process Order ,
See we have Numbe of process order , that status is REL CRCR DLV PRC CSER BCRQ BRRQ GMPS*
Now i want to Mass TECO all order , but i can not TECO because status should be CRFI ,
So
1) how can i change staus all order at once to CRFi?
2) Can i do the TECO in staus CRCR ?
3) Any other solution
REGARD
SAP

Hi,
It is NOT possible to do the process order TECO with the status CRCR , this has to be changed to CRFI
you can change the status to CRFI from CRCR in the following way
1) go to CO54 -T-code
enter the plant & Date range
enter the process message category PI_CRST ( sap std) or relevent category defined for you plant
select the to be sent option
2) here you will get list of process messages related to control recipes, click on the SEND (ctrlshiftF12)
process message will be processed & Control recipe status will be cahnged to CRFI for CRCR
Thanks,
Rajaniaknth

There was a problem with your order.

I am trying to order CreativeCloud subscription (using upgrade option) but I keep getting an error "There was a problem with your order." after credit card is beeing processed. I tried it for several times but no success. My card details were entered correctly, card isnt expired and limit isnt exceeded.
Any ideas what could be wrong?
Thanks,
Stanislav

Hi Svizual,
Are you still facing the issue?
-Dave

Order Prints: A Problem With Your Order...

Does iPhoto store your order somewhere so you can order again?
After my wife spent hours cropping and ordering 290 pictures from the last year, we received an email saying we had A Problem With Your Order. We found a movie, AVI brand, that was included in the order and must have cause the problem.
It says to fix the problem, which we did, and resubmit. Does that mean we start the order process all over again?
Thanks

It says to fix the problem, which we did, and resubmit. Does that mean we start the order process all over again?
Yes - you can ask Apple for final verification - http://www.apple.com/support/photoservices/orderstatus/
LN

IU Elim. "No data found for processing using current selection conditions""

Dear Experts,
While Executing task of Interunit elimination in Consolidation Montior I am getting Message "No data found for processing using current selection conditions"
Ex. is
A)
In Unit X
GL (399999) Account     Dr. 65000 (Customer Recon. Ac.)   (with Trading Parter X)
GL (499999) Rev.A/c           65000 (with Trading Parter X)
In Unit Y
GL (199999) Exp. A/c     Dr. 65000   (with Trading Parter Y)
GL (299999).Account           65000 (Vendor Recon. Ac.) (with Trading Parter Y)
B) GLs in info cube in 0FIGL_C01 are :-
GL Account---CCode--Trading PartnerDebit--
Credit
199999--YY65000-----00000
299999--YY00000-----65000
399999--XX65000-----00000
499999--XX00000-----65000
In COnsolidation WorkBench
1) I have created Document Type
2) Method-
In General Tab
   a) Two SIded Selection
    b) Per Transaction Currency Selected
In Selection Tab
1St Selection
GL Account = 299999 (Customer Recon. Account)
Company    = X
Trading Partner = X
1St Selection
GL Account = 399999 (Vendor Recon. Account)
Company    = Y
Trading Partner = Y
Difference Tab
a) Post Diff to "Unit from Selection 1"
b) Key Figure "Period Value GC
c) Check Limit Per Difference Row
Other Differnce
GL Account = 100099 (Other GL)
Currencyce Diff
GL Account = 100510 (Other GL)
Question :-
1) Is the posting is appropriate and does it attracts IU Elimination?
2) The Infocube Details are correct?
3) Any Config issue
May any one suggest, Why Am I not able to get the data?
Thanks
Rakesh Shrivastav

Dear Sir,
Following are the View at my end in context to your suggestion
1. check the BCS totals data to ensure trading partner is included.
THis is the view of Source Info Cube 0FIGL_C01
GL Account---CCode--Trading PartnerDebit--
Credit
199999--YY65000-----00000
299999--YY00000-----65000
399999--XX65000-----00000
499999--XX00000-----65000
2. Execute the task for the cons group that includes both cons units X and Y
The COns Group Is XYZ
X- Cons Unit
Y- Cons Unit
In Cons Monitor I am executing Test run at XYZ level
3. Although the trading partner for cons unit X should be Y and vice versa, the elimination should still occur with the cons unit X and trading partner X records.
Same as the query description
4. make sure that the items 199999, 299999, 399999 and 499999 are included in the elimination method for either selection 1 or selection 2.
The Method Selection Tab View is
1St Selection
GL Account = 299999,199999
Company = Y
TP = Y
2Nd Selection
GL Account = 399999,499999
Company = X
TP = X
What is your View On That?

Problem with purchase orders and cancelling order lines

Hi,
We have a problem with purchase orders and cancelling order lines. For example we have created PO no. 4300291277:
We have made a GR 5000186897 on 03.09.2010 amount 1.920 and tried to cancel it with GR 5000208866, but it takes the invoice amount 1.724 instead of 1.920. What is the correct way to undo this orders, so we cancel the 1.920 and not the 1.724?
Please help me, your help will be highly appreciated.
Regards,
Najma.

hi,
You have to cancel the IR first...and then do cancel the GR...
yes, there will be diff. in the price(if the price changes in bwtn)..if no changes in the price , the price will taken as old one..
Process:
1. Cancel IR
2. Then cancel GR..
3. then go the PO and try to delete the line item..
Regards
Priyanka.P

Problems with Calendar order from iPhoto

I've tried twice to create a calendar out of iphoto and I've gotten a response via email after several days that there was a problem with the order:
Apple discovered an issue with the file you submitted. It appears the
calendar has small month names. As a result, Apple is unable to process
your order and you will not be charged.
We recommend updating your software, changing the theme on your print
product, then changing it back to the original theme.
Once completed, preview your print product in iPhoto, and place the
order again.
For instructions on how to update your software, refer to:
Mac OS X - Updating your software
<http://support.apple.com/kb/ht1338>
For instructions on how to change your theme, refer to:
iPhoto - How do I change the theme or type of my book, card, or
calendar?
<http://support.apple.com/kb/HT1850>
For instructions on how to preview your order, refer to:
How to preview an order in iPhoto or Aperture
<http://support.apple.com/kb/HT1040>
We appreciate your business and apologize for any inconvenience.
There are no updates for my OS or iPhoto. I changed themes and went back to the original (and had to rebuild it all over again, grrrr). Any ideas what could be causing this?
So much for getting these for Christmas presents. Thanks!

Dear Martha,
I had the same problem, and this bug in iPhoto cost me my yearly christmas presents for all of our families (grandparents, aunts, uncles etc.)
By digging through this forum, I found the solution that actually worked for me.
But I will not order the calendars from Apple because they cancelled the calendars three times without telling me what the problem was, and endless and numerous calls with different support people at Apple gave no solution.
I will now export PDFs and send them to a different service.
Maybe in your case there is another project.db file?
Sometimes, when iPhoto rebuilds databases, it seems that it creates a second one.
(I read it here somewhere in the forum - so I hope this could be a good hint to follow)
All the best,
Martin

Problem in process order creation.

Dear Sir/ Madam
i am facing a problem while process order creation.
the problem is:
Error when calculating cost for order ATFEDEC11 "see log Log is deleted when saving
Do you still want to save?"

Hi,
The log for production order preliminiary costing is not saved. Therefore, once the order is saved, there is no log available anymore (this is by the way a question of PP; none of the logs is saved).
Hope that helps...
Regards,
Declan

There was a problem with your order please call?

My wife ordered a 4S 32GB black model and was putting me on her plan of currently 2 phones. We ordered via the site about a week ago and got the message the phone would ship 11/30, added a data plan etc on a 3rd separate line. Received an order confirmation, but couldnt use the 6-7 digit order number to check on it kept saying no order. Today she checked and said she received soemthing from Verizon saying there was a problem with the order and to either call or email them. She's at work til 4p EST time but was curious if anyone else got this and what it could cause this message?
On a separate note I have my own plan with a iPhone 4 that I was going to cancel and move to her plan porting my number but the order wouldnt permit a port of a verizion number. I called and the rep swore there would be no cancellation fee (sounds fishy to me) but he had someone else look and they said there was no cancellation fee either. I dont know if the order flow recorded that and they are question it or something else is going on.
Any ideas on why Verizon would have a problem with the order would be great! Thanks!

As far as the porting of your line to your wife's account...you might want to go in to a local store to handle that. I don't think it would be a port in the traditional sense...but a swap of responsibility...meaning your wife would take ownership of your line. I will have to do that soon for one of the lines under me so that the person using it can have it in their name. In that instance, there would not be any cancelation fees because the line isn't being canceled. The account ownership is just being taken over by someone else and they would take over the remainder of the contract.
As far as the issue with the order...if your wife makes you an authorized manager on the account you would be able to call in and discuss whatever is happening. The issue could be a number of things so it's hard to tell you what it could be. It's also possible that there isn't an issue at all and the problem is just that the system isn't recognizing the order number.

Problem with sales order and Service order

Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.

CLOSED

Problem with Tabbing Order in LiveCycle

I have a two page form. The last field on the second page is an image field (the user can attach a graphic). The problem is it won't tab back to the first page after this field.

I, too, am having problems with tab order.
I have a two-page form created in LiveCycle Designer. There are 66 fields on the 1st page of the form, and 65 fields on page 2. When I use Window > Tab order to examine the tab order, all is as it should be (except for one thing, discussed later). However, when I go into the Preview PDF tab (or load the form in Acrobat X Pro), field 4 on page 1 tabs to field 42 (on page 1). Additionally, tabbing from field 41 on page 1 takes me to field 43 on page 2.
I can use Action Builder to ensure that the tab goes to the appropriate field, but that seems a rather kludgy way to go about it.
And that additional problem: I've got three text fields on page 1 that are of type Protected. According to the documentation, "The protected field is not included in the tabbing sequence and it does not generate events.", yet all three fields are in the tab order.
What (if anything) am I doing wrong?
Thanks.

Problem with creating order through order template

Hi experts,
We have problem with creating order by order template. Extensions data available in order template is not sent to order. Extension data are showing upto order submission form. But after sucessful creation of order extension data are no longer available in CRM-ORDEr.
We are using ISA 4.0 with CRM 4.0.
We recently applied patches on CRM server. Before patching it was working fine.
Can you please suggest us to solve this issue?
Thanks in Advance.
Regards,
Murugan Arumugam.

closed.

Problem with process order resource selection condition

Similar Messages

Maybe you are looking for