Problem with processes repository and BPMN role

Hi,
I have created process and now I would like to create new user with BPMN End User role but my CE 7.1 doesn't have such role. I also don't have "Processes and Tasks" tab under Configuration Management >Processes and Tasks. Do You know what is the reason of this situation? What do I need?

I have the same problem.  menu-caches doesn't die after user logs out of the session (don't have the gamin issue though).  I too am running LXDE.  When a different user logs in via gdm you'll still see the menu-cached processes for other users and I end up having to kill them as root.  I do believe this is a bug with either menu-caches and/or LXDE (or perhaps, more specifically, its session manager).  I've looked high and low through the system to figure out where menu-cached is invoked from and for any sort of associated configuration file to no avail.  I'm left with the conclusion that the invocation of menu-cached is hard-coded into start-lxde. 
As a ugly-hack workaround you might try making a shell script like the following in /etc/gdm/PostSession/ directory:
#!/bin/sh
killall menu-cached
This of course is only applicable for those running gdm as their display manager.  Also don't forget to make it executable.
I would imagine that menu-cached not closing on user logout is very much a bug.  Or perhaps, more precisely, something that hadn't gotten put in yet.  Afterall, LXDE is still a relatively new desktop.  A good one at that so far, if you don't mind some of the missing polish that its dev haven't had a chance to add yet.
If someone else knows a more elegant solution than that please let me, and the other LXDE users, know.
Last edited by PingFloyd (2009-04-04 02:08:29)

Similar Messages

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • Problem with Data Model and Analysis View

    I create an analyze in BI Publisher and then i create a data model using this object.
    When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
    So i was check the analysis and all looks appears to be fine,  In the results tab it show me a complete table with the data i was looking to use.
    So i try to repeat the error and when  i try to create the XML for the Data Model i found this two error in the logs:
    [root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
            at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
            at java.lang.Throwable.<init>(Throwable.java:196)
            at java.lang.Exception.<init>(Exception.java:41)
            at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
            at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
            at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
            at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
            at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
            at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
            at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
            at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
            at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    And when i try to view the report that use the analysis i got this two warning in the logs:
    [2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
    Any ideas about how to solve or debug this?
    Thanks

    I follow your instructions and it works fine. I can create the XML and the reports can show data.
    So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
    Any idea how to debug it?
    Thanks.

  • Problem with purchase orders and cancelling order lines

    Hi,
    We have a problem with purchase orders and cancelling order lines. For example we have created PO no. 4300291277:
    We have made a GR 5000186897 on 03.09.2010 amount 1.920 and tried to cancel it with GR 5000208866, but it takes the invoice amount 1.724 instead of 1.920. What is the correct way to undo this orders, so we cancel the 1.920 and not the 1.724?
    Please help me, your help will be highly appreciated.
    Regards,
    Najma.

    hi,
    You have to cancel the IR first...and then do cancel the GR...
    yes, there will be diff. in the price(if the price changes in bwtn)..if no changes in the price , the price will taken as old one..
    Process:
    1. Cancel IR
    2. Then cancel GR..
    3. then go the PO and try to delete the line item..
    Regards
    Priyanka.P

  • Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

    Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
    I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
    All worked OK with ISO 6.

    Hello CraigNicholson
    You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    Regards,
    -Norm G.

  • Boot Camp problems with Windows 7, and a new Macbook Pro

    When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

    My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
    1. No sound with my new Windows 7 64 bits.
    2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
    3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
    I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
    I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
    Please help.

  • Problems with games server and client

    Hi! I am making an MMORPG game and I have problems with the server and client connection.
    I can connect to the server, but when a second player does, the server console tells me this:
    java.net.SocketException: Connection reset
    After that, all clients disconnect.
    Which is the problem?
    How can I solve it?
    Thank you so much

    Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
    TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
        try {
          ServerSocket serverSock = new ServerSocket(PORT);
          Socket clientSock;
          while (true) {
            System.out.println("Waiting for a client...");
            clientSock = serverSock.accept();
            new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
        catch(Exception e)
        {  System.out.println(e);  }
      } This is some code of TourServerHandler
    public TourServerHandler(Socket s, TourGroup tg)
        this.tg = tg;
        clientSock = s;
        name= "?";
        cliAddr = clientSock.getInetAddress().getHostAddress();
        port = clientSock.getPort();
        System.out.println("Client connection from (" +
                     cliAddr + ", " + port + ")");
    public void run()
      // process messages from the client
        try {
          // Get I/O streams from the socket
          BufferedReader in  = new BufferedReader(
       new InputStreamReader( clientSock.getInputStream() ) );
          PrintWriter out =
    new PrintWriter( clientSock.getOutputStream(), true );  
    // and here goes the rest... The TourServerHandler thread uses this code to send messages:
    tg.broadcast(msg); tg.broadcast works like this:
    synchronized public void broadcast(String cliAddr, int port, String msg)
      // broadcast to everyone but original msg sender
        TouristInfo c; // this object stores info about the client
        for(int i=0; i < tourPeople.size(); i++) {
          c = (TouristInfo) tourPeople.get(i);
            c.sendMessage(msg);
      } This is the error part
    public void sendMessage(String msg)
      PrintWriter out;  
        out.println(msg);  
          System.out.println("OK");
      } I can't find any error but I still get that Connection reset exception...

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • Problems with the richTextEditor and quotes

    Hello
    I'm having problems with quote chars and the richText
    control's htmlText. When users enter quotes into the richTextEditor
    control. The quotes breaks the HTML text, meaning it's no longer
    well formatted. Is there an escape char that I need to use. Or do I
    need to force some kind of refresh on the control prior to using
    the htmlText string?

    I have been using RTE in a content management system and
    found a need to replace non-standard quote characters with proper
    UTF-8 character counterparts. Curly quotes in particular are
    problematic. Use a replace function to substitute non-standard for
    standard characters.

  • Problems with .ARW files and auto toning

    problems with .ARW files and auto toning
    let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
    now that I have a Sony A7R the problem is more serious
    Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
    but when I upload them to lightroom, they come out near black.
    allow me to explain
    lets say I import 100 images
    i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
    as the images import i see a preview in the thumbnail which looks fine.
    i double click on one to enlarge it, hence leave grid view.
    for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
    one by one as it inspects each image, if it was a DRO image it makes it too dark.
    to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
    how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
    i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
    but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
    now i have to tweak each file or find a profile for it which is added work.
    any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
    there are 2 phases...one is when it originally imports and they look fine
    second is scanning each image and applying some kind of toning which darkens it too much.
    thanks for the help

    sorry thats the auto reply message from yahoo email.
    i've disabled it now
    thing is, there is no DRO jpg to download from the camera
    its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
    but then sadly reverts it to no DRO settings.
    because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
    so in reality there is no point in using DRO because when i upload it lightroom removes it.
    is there a way to tell lightroom to preserve the jpg preview as it first sees it.
    its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
    what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

  • My iTunes says that there is a problem with my ipod and i have to restore it, but i bought songs on my itunes on my ipod not on the itunes on the computer so i have not transfered purchases and now it wont let me how doi restore without losingmy newsongs

    So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything.   Thanks

    There is a backup plan after doing the Restore.  Read this.

Maybe you are looking for