Problem with prod. ver. explosion to production order

Hi
I have problem with production versions. I have FERT with 3 production versions. Additionaly we have Z-program (on Z-table) which control parameter sold to party (from sale order) with production version. So after MRP I see in planned order right production version for example 3 - field PLAF-VERID; in master data in planned order I see right alternative BOM and routing; but when I make a conversion to production order I see that system always explode 1st version; additionaly in planned order in components (button) I see 1st pr.ver (1st alternative BOM) and in Bill of Material (it seems like to manually expolding BOM) I see right version??? But it couldn't be like this that to have right data I need to go to transaction MD12, explode BOM manully, save and after that make a prod. ord.
I would like to system explode BOM according to production version (field VERID) already in planned order; so after that it should be that when I will converted it to production order I should have right BOM and right routing from production version signed in planned order.
I know it sounds complicated Add. in configuration all parameters are set right to explode BOM etc. etc. system version: 4.7
Thanks and regards. Joanna
Additional info: I cancel this question cause problem is in Z-program; becuase when according to Z-table system change input in field VERID for system it is only "digital" not parameter for which system should explode right BOM; sorry for disturbing, we need to change Z-programm; I do not know how but maybe any function module can help - we will think. Regards
Edited by: Kostkaj on Aug 17, 2010 10:25 AM

HI
Check this link and find valuable suggestion by Mr Mangalraj regarding selection of PVs
Produciton version selection in MRP
Regards
Anupam Sharma

Similar Messages

Problems with over/under absorption on production cost centers - GBB AUI

Hi,
I have a problem with over/under absorption on production cost centers after month end closing.
We are using material ledger CKMLCP and actual activity rates from direct cost centers are settled directly to products using GBB AUI account determination.
Unfortunately from time to time there appears a significant balance on production cost centers after running CKMLCP. What might be the reason? I have analysed line items on cost centers but cannot find any answers.
We are using assignment of cost elements to particular activity types (function splitting), and I have checked that all cost elements are assigned to proper activity types.
Best regards,
Karol

Hi,
DP90 is used for Resource related billing, is broad term basically when you performing service that time you have to raise billing on the basis of resources which you had spend for perticular service
DP90 is run on the basis of DYNAMIC ITEM PROCESSOR,
http://help.sap.com/saphelp_di471/helpdata/en/59/54fc37004d0a1ee10000009b38f8cf/frameset.htm
I will tell you one process from the prspective of CS module
Create notification >> Create service order >> Confirm service order >> Resource releted billing (genrates sales document) >> Invoice to customer with refrance to sales document.
Now here DP90 is used to determine material,IN SALES DOCUMENT because CS module don't have billing feature as like SD Billing.
In CS module activities/Operation,but in SD module we speciefy material codes
So DIP determines XYZ activity/operation is ABC material in SD
kapil

BOM explosion from Production Order

Hi All,
I understand from SAP Help files that we can explode BOM from Production Order using Read PP Master Data. But it also says, that we cannot do this if items have already been issued out. So would like to know is there anyway out to ensure that the production order is reading the latest version of BOM.
The reason i want to know is because, at present the BOM keeps getting updated & so the work order has to reflect the new items. The BOM contains about 300 or more items, so manual changes is very tedious & error prone at the moment. Furthermore some components are outsourced. So i want to receive them back & post new materials for them. Hope my problem is clear & await inputs
Vivek

Hi All,
Thanks for the inputs. I think for the situation am facing, the Order change management method, should be of help, as the BOM changes does not take place on scheduled dates, for me to fix the BOM explosion dates & assign them. As of now the BOM gets changed, depending the customer requirements, which is unpredictable.
Clarification required:
1. The profile which is created using OPL7 & assigned in OPL9 is unique, i.e. for any change numbers of BOM will always follow the profile entered in 'Overall Profile' in Work Scheduling view & i do not need to create new profiles for each new change number of BOM
2. Once i run the COCM with the new change number, in the production order - components view will i be able to see any error message for those items which no longer feature in the new version of BOM? & will the materials added in the new BOM automatically feature in that list or do i have to manually add these to the order & if so, how will i know which materials need to be added?
Hope the clarifications sought are clear, await inputs
Vivek

Machines with different Capacities in a production order

i am have the Machines of Different Capacities( Ex Machine A :2pcs/hr & Machine B:4 Pcs Hr).
i have Maintained the Work centers as Same Name.
In actaual Production i want to use both the Machines.
How to maintain in the Routing .This is only one Operation and i want to use both the Machine.
Ex :Prod Order Qty :100
I want to use Machine A to manufacture the 60 Qty and use the Machine B for 40 Qty.
Please give me the Solution

Dear laks,
I think this will help. If you have maintained individual capacity as 2 for eg, for machine oriented capacity category then pl maintain the individual capacity details for those 2 nos. You can give the individual capacities what ever name u like for eg Punch press 10ton, Punch Press 20 ton etc.
Note: you can access the individual capacities in the menu bar "goto - Individual capacities" of the relevant capacity category.
Once you have maintained this, you can assign these individual capacities in your production order. You have to enter into the production order operations, double clik on the operation number which has got this WC, then enter into Cap. req assignement tab. There u can enter the individual capacities detail and assign the quantities for the individual capacities as well. Also, the capacites will be split and despatched as well.
During the confirmation process, in CO11n, you have to mention the split number as well other than your confirmation / order number. The system will validate this quantities with the production order capacities split qty.
Regarding parallel routing, i think this will only work if you have two different work centers.
If the scenarios is always like this, i think it would be preferable to create two diff work centres and like the other members of the forum have suggested, a parallel routing would be ideal.
reg
kiki
Award points if this info is useful and solves ur problem

Bins problem while creating goods receipt for production order.

Hi All,
          I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
The scene is like that.
The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
like this,.
Typ StorageBin SC SS    Stock Avail.st BUn GR Date    DocumentNo Storage Unit         Time
SLoc Batch      Re IA PutawayS Pick qty Cert. No.
VN1 106A088                 0        0 CS 01/25/2010    4739297 1005721391           10:00:59
100 0001020069            60        0
VN1 107B076                 0        0 CS 01/25/2010    4739298 1005721392           10:01:01
100 0001020069            60        0
VN1 108B076                 0        0 CS 01/25/2010    4739299 1005721393           10:01:04
100 0001020069            60        0
VN1 109A077                 0        0 CS 01/25/2010    4739300 1005721394           10:01:06
100 0001020069            60        0
VN1 110B079                 0        0 CS 01/25/2010    4739301 1005721395           10:01:08
100 0001020069            60        0
VN1 106B088                 0        0 CS 01/25/2010    4739302 1005721403           10:01:11
100 0001020069            60        0
VN1 123B158                 0        0 CS 01/25/2010    4739303 1005721389           10:01:13
100 0001020069            60        0
VN1 124A160                 0        0 CS 01/25/2010    4739304 1005721390           10:01:15
100 0001020069            60        0
VN1 118A133                 0        0 CS 01/25/2010    4739305 1005721396           10:01:17
100 0001020069            60        0
VN1 119A128                 0        0 CS 01/25/2010    4739306 1005721397           10:01:20
100 0001020069            60        0
VN1 120B162                 0        0 CS 01/25/2010    4739307 1005721398           10:01:22
100 0001020069            60        0
VN1 121B159                 0        0 CS 01/25/2010    4739308 1005721399           10:01:24
100 0001020069            60        0
VN1 122B159                 0        0 CS 01/25/2010    4739309 1005721400           10:01:26
100 0001020069            60        0
VN1 123B159                 0        0 CS 01/25/2010    4739310 1005721401           10:01:29
100 0001020069            60        0
VN1 124B160                 0        0 CS 01/25/2010    4739311 1005721402           10:01:31
100 0001020069            60        0
Thnks you,
Anmol.
Edited by: anmol112 on Jan 25, 2010 10:34 PM

no replay, clossing threat.

Automatic batch determination with fixed batch number for production order

Hello all,
I want to create a production order where the batc number can be assigned for one component as Batch fixed value once the order is released.
1.- I have created the characteristic (CT04) assigned to the table MCHA and field CHARG (Batch number) and one value: LINER.
2.- I have created the class (CL02) and assign to this the characteristic.
3.- I have created the sort ZSORT and the batch (MSC1N).
4.- I have checked the classification in the material and it has assigned correctly the class and characteristic and the MRP2 view has the backflush = 1, batch entry = 3 and the prod. stor. location = COIL.
5.- I have created the strategy (COB1, strategy type CO02) and assigned the selection criteria and sort.
6.- I have created the order (CO01).
7.- I was releasing the order and the batch number was assigned but, with numbers!! and I need assign this with fixed value = LINER.
Could you help me please? How can I do it?
Kind regards,
SP
Edited by: SANDRA PALOMO on Mar 15, 2011 11:28 AM

Hi Vishwas.K
Thank you for your respone, but, doing more researching, let me explain you with more detail:
1.- I am going to the transaction CO02 in order to release the order, but, before it, I am checking the component by Go to > Overviews > Components.
2.- Then, I am selecting my component and making a click in "Batch determ. " button.
3.- The system is showing me many batch numbers and I select the "Selection criteria" button and the system said: "Selection class "LINERBATCH" does not contain any selection criteria". But, it has a characteristic that I have created before.
4.- Then, I select in the new screen "Selection criteria: Origin..." the"create" button.
5.- The system selection my class from the material classification and when I go back to the last screen, finally the system is showing me my batch: LINER.
Do you know why my selection criteria with my selection class is not working in automatic?
Thank you for your time and support.
Kind regards,
Sandra Palomo

Downloaded AVG protection and it cleaned my computer, now whenever i try to start photoshop it says that there is a problem with the licensing of the product and gives me an error code 213:11

Exactly as it says above. The computer was given to me as a gift, and the person who gave it to me had already bought photoshop and put it on for me. Photoshop was working perfectly before AVG did the computer scan, and now every time i try to use it a window comes up instead that says "A problem has occurred with the licensing of this product. Restart your computer and re-launch the product. If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen. Error: 213:11"

Apparently it "cleaned" away needed files.
Most likely you will have to reinstall Photoshop to get all the files back.

Problem with performance of a query having order by, distinct clause

Hi,
I have a problem with queries having order by, distinct clause.
While its executing its taking lot of time. With DBMS_PROFILER identified the queries taking long time.
The table is having approximately 70 million rows.
Problem -1
select * from table_name order by col1;
select distinct col1,col2 from table_name;
Here i am having 2 solutions request to let me know whether i am right if not suggest me right solution.
Solution1:
Max parallel servers is 8.
select /* + parallel(table_name,8) */ * from table_name order by col1;
select /* + parallel(table_name,8) */ distinct col1, col2 from table_name ;
Solution-2:
select /* + first_rows */ * from table_name order by col1;
select /* + first_rows */ distinct col1, col2 from table_name ;
Problem-2
I am having a query with where condition on columns.
Select * from table_name where col1='value1' and col2!='value2';
Index created on col1 and col2.
As we no that not equal won't use index as it is a composite index it should use the lead column. but its not using the index.
Should i forcibly use index with hint or suggest me better solution.
Any help really appreciated.
Thanks in advance

unique wrote:
The table is having approximately 70 million rows.
select * from table_name order by col1;Do you really want 70,000,000 rows from your table without any restrictions ? And furthermore ordered output ? I honestly understand the slowness of that query.
Here i am having 2 solutions request to let me know whether i am right if not suggest me right solution.Who knows if you choosed the right solution. I would suggest to reconsider your query and the need of 70,000,000 returned rows.
Problem-2
I am having a query with where condition on columns.
Select * from table_name where col1='value1' and col2!='value2';Please, provide the explain plan, eventually the tkprof output could also help. And tables descirption AND indexes description.
And OS and Oracle version.
Nicolas.

Why Apple don't fix half year serious problem with HD3000, Lion and Adobe products? Doesn't Apple really care about advanced users?

Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!

If you have a problem with Adobe products, voice your issues with them.
It is the software developers responsibility to maintain compatability
with any operating system, beit OSX or Windows.

Problem with BOM Quant while creating Sales order with reference using BAPI

Dear All,
I am facing problem with creating a slaes order with reference to other sales order by using BAPI_SALESORDER_CREATEFROMDAT2 .
Sales order is getting created but
1. It exploding the BOM means the line items which are not there in the reference SO also coming in the new SO ( all BOM items are coming )
2. Schedule line for BOM header item is getting copied to all sub items of BOM.
Can any one help me out to prevent the above deviations in creating Sales order with reference by using BAPI_SALESORDER_CREATEFROMDAT2.
Note: while passing the parameters to BAPI_SALESORDER_CREATEFROMDAT2
all the data related to items is exactly the same as in the original Sales Order.
Thanks in advnace.
Regards,
John

Hi All,
Can any one help me !!!!!!!!!!
please

FM for BOM Explosion at Production Order

Hi all,
I am using 'CS_BOM_EXPLOSION' to get the list of component of a material, for rework order we used to delete some component in that case this FM gives same list of component, so I need a FM which gives me list of component with respect to Production Order.
Thanks
Varun

HI,
You can always get the BOM Material Code by:
Select Single * from AUFM where AUFNR = w_order_no.
& then use FM CS_BOM_EXPL_MAT_V2 to fine out the Materials consumed by the BOM material.
I hope this helps,
Regrads
Raju Chitale

HT1918 How do I clear a message about a problem with a previous purchase when my order history shows no purchases?

I am trying to download an app. I get a message that says there is a problem with a previous purchase. I log into the store and there is no history. I updated my address but continue to get the same message and cannot download my desired app. Any suggestions please?

If you get a pop-up message asking to update Firefox or plugins or scanning for malware then such a message is likely a scam and you should never respond to such an alert to avoid getting infected with malware.
*Only update Firefox via "Help > About" or by downloading and installing Firefox from the Mozilla server and never via a pop-up or link on a web page.
*Plugins should only be updated via the plugin itself or by visiting the home page of the plugin.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Problems with form 10022 (selecting offer from order form)

Hi,
I'm trying to capture the event of form load of the form 10022, but I can't. It doesn't execute that event, the ones that it execute are form activate and got focus, so I've tried with them but the problem is that although beforeaction is false,they execute before loading the matrix data. How can I capture this event so that the matrix is loaded? I've also tried with matrix load and datasource load events. This form is the one that appears when clicking in the offer button in an order form.
Thanks

Hi Vanesa,
Try using the menuevent or button click event which makes the 10022 form to be shown. After this form is loaded and activated, it should raise again with the beforeaction = false value.
Keep in mind that if you use the menuevent, you should catch the form using ActiveForm Property.
Hope this helps.
Ibai Peñ

Problems with assembly update in Biztalk production server

Hi.
I'm facing a problem I cannot solve about an update in one of the resources of an application in Biztalk production server.
Suddenly a bug in an application that receives messages through an external web service appeared. To find out where the bug was occurring, the orchestration was filled with many EventLogs and some other things to test. After the bug was tracked and corrected,
it was added an update in resource with the original code of orchestration, that way the EventLogs were no more logged in Event Viewer and the other things wouldn't exists in production.
Occurrs that the EventLogs are still being logged in Event Viewer. Even after the resource was added many times in server and after many resets in the host instances.
The problem aren't the logged events, are the other things that we must remove from production to avoid headaches.
There is a way to fix this? Or some better way to search a resolution for that?
I'm thinking remove the resource, reset the hosts instances, then add the resource and reset again, but for me this is very hardcore, even more in the production Server.
Usually, the deployment in production Server is made based in the import of msi files and execution of this files. The "Add -> Biztalk Assemblies" method was used this time only because was an emergency. I don't know if makes sense.
Thank you for reading, please if you have any answer or material to solve this, reply this question. If you don't understand something because of the English I'm very sorry, I'm still learning the language (and yes I use Google Translate).

Rafael,
Enabling the options for GAC as you did, should GAC the components.
BizTalk uses
C:\Windows\assembly folder for assemblies. So when you import the msi with GACing options enables, ensure the assemblies are gaced in C:\Windows\assembly folder.
Otherwise, just drag and drop the assemblies from your folder to this folder. Or using command prompt
cd to c:\windows\assembly\gac_msil and copy the assembly from your folder.
Ensure you have GACed the assemblies in all the BizTalk processing machines when you more than one BizTalk machines.
Also ensure you’re restarting the correct host instances. If the artefact under the isolated host instance, ensure Application pool /IIS is restarted.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Problems with OS Ver 10.4.10

Since I updated to Tiger 10.4.10 I am having Keychain problems, having to enter a password to open Mail, and Safari is producing flakey messages as others have also reported.
I wonder if it is possible/practical/safe to reinstall Ver. 10.4.9 and if so, how does one do it?
I never experienced any Keychain issues in the past 3 years since switching from PC to Mac and I have a feeling that it is Ver. 10.4.10 that is the culprit.
Slater
iMac 20" Core 2 Duo Mac OS X (10.4.10) Powerbook G4 17"

to revert back to an earlier version of the operating system you need to use your install disk and use the archive and install feature. search support for "archive and install" for more information.
Archive and install will save all your files and settings and put you back to what your system came with.
After that is done you can go to Apple Downloads and pick up whatever 10.4.9 combo updater is appropriate for your machine, there is one for non-intel macs and one for intel macs. download that update. After that you can use software update to pick up the rest of the updates you previously had, BUT I would NOT PICK UP the 10.4.10 update or 10.4.10 combo update until there are confirmations of it being fixed.
i have done the above procedure and it solved my problems.
jim

Problem with prod. ver. explosion to production order

Similar Messages

Maybe you are looking for