Problem With Profile Pics Not Appearing in iMesage

Why is it that I can have a profile picture added to a person in my contacts list, yet that picture may or may not show up in a conversation in iMessage? For some of my contacts the picture does appear, and for some it does not. I'm having this issue on my iPad Air and my iPhone 4.

On the iPad you will see pictures in the left-hand panel for each message thread but this feature is not implemented on the iPhone.
The Mac, in addition, shows the contact picture on each individual message.

Similar Messages

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you.

Problem with phone line not ringing

Hi, I have a problem with my landline, it appears to ring out but isnt, no one can ring me as it says Im busy and bt cant check my line because it says Im busy..
My phoneline died in my bedroom ages ago, so now rely on the main socket only..
Can you pls advise me on what to do?
Im disabled, so cannot plug and unplug but my daughter or grandson will be up later this afternoon if that needs to be done..
Many thanks Ann

Please ask them to follow the instructions on this site http://bt.custhelp.com/app/answers/detail/a_id/9812/c/345,353
If they think the fault is outside of your house, then they can report the fault here.
https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=2&s_cid=con_FURL_faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problem with file descriptors not released by JMF

Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.

Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects.

Problem with Adobe Reader not being able to run with Maverick 10.9.2?

problem with Adobe Reader not being able to run with Maverick 10.9.2?

Have you updated your version of Adobe Reader?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Not here; updated three systems without issues.
Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
Russ

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The wrong lens F3.5/6.3 profile is checkmarked and I can not find the new RX10 Sony 70-200 F2.8 G SMM11 profile. The meta data in the Library module correctly list the Sony RX10 and the Correct lens.
How may I select the correct lens profile for my Sony DSC-RX10?

Ask in the PS/ LR/ ACR forums
Mylenium

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

I had a problem with my WRT54GS not connecting to my inte...

I had a problem with my WRT54GS not connecting to my internet until I cloned my old routers mac address. I was using a BEFW11S4 which was bullet proof and worked for several years until I changed to Wireless G. Upon purchasing the WRT54GS and setting up all parameters exactly like I had before I could not make any connections, wireless or otherwise until I cloned my mac address to the same address as my previous router. Apparently my ISP had that mac address registered and would not properly perform DHCP even though all other paremeters were correct. I read lots of messages here on line with issues with the WRT54GS connecting and this fixed my problem outright. If you upgrade from a previous generation router (Linksys or otherwise apparently) copy your old routers mac address and clone it to your new router and you should be able to connect. This fixed my problem after several hours and days of troubleshooting. Good Luck Karnage

As an alternative to using MAC address cloning, you can phone your ISP, tell them you have a new router, and tell them to reset their system to accept the MAC address of your new router. This way, you won't have to remember the old MAC address, in the event that you need to reset your router to factory defaults.

Is anyone having a problem with iPhone 5 not backing up to iCloud. No problem at first now it says it will take 35 hrs, etc to back up.

Is anyone having a problem with iPhone 5 not backing up to iCloud. No problem at first now it says it will take 35 hrs, etc to back up.

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

Have you tried calling Apple tech support?
http://www.apple.com/contact/

Problem With Profile Pics Not Appearing in iMesage

Similar Messages

Maybe you are looking for