Problem with Profiles in AC RAR 5.3

Hi friends,
I'm trying to perform a syncro from the profiles in an HR ERP system with RAR 5.3 (SP 11.2).
I only get a part of the profiles. The other roles are read by the system, but somehow, they are ignored. Log:
Jan 9, 2012 11:05:30 AM com.virsa.cscext.dao.CSCDAO populateGenObjRoleProfile
INFO: Update P:VZXALALAL1 of HP2
Jan 9, 2012 11:05:30 AM com.virsa.cscext.dao.CSCDAO populateGenObjRoleProfile
INFO: Update P:VZXALALALA of HP2
Jan 9, 2012 11:05:30 AM com.virsa.cscext.dao.CSCDAO populateGenObjRoleProfile
INFO: Update P:VZXALALALB of HP2
Jan 9, 2012 11:05:30 AM com.virsa.cscext.dao.CSCDAO populateGenObjRoleProfile
INFO: Update P:XAPU_A of HP2
Appreciate any kind of help.
Thanks in advance.
Cheers,
M.

Hola Mauro!
If you check: Note 1168120 - Risk Analysis and Remediation 5.3 Support Package (VIRCC) you'll be able to see some errors that are corrected in newer SPs, for example:
"When running Profile Sync, it runs successfully but no profiles are actually loaded. The log shows the job was successful, but the RAR tables are not updated." This error is corrected in SP13.
You can check database table VIRSA_CC_GENOBJ in order to know if the profiles get loaded or not.
Also you can check if you have the correct versions of VIRSANH and VIRSANH (Note 1352498), the user credentials used in the Jco and the install guide (5.1 SAP GRC Risk Analysis and Remediation Configuration).
Cheers,
Diego.

Similar Messages

Problem with profiles in the site window

Hey everyone,
I've been looking all around the web for this and couldn't
find it.
I have a major problem with DW site window, more specifically
the profiles: it is way too slow !!!!
1. When i change from a site to another one, it takes up to
10 sec.
2. When i want to change the settings of a site it takes up
to 20 sec to open the properties window...same as when I want to
add a new one.
3. Sometimes, the login/pass of my FTP acount is forgotten
and i need to re-enter it !
All the rest is fine and works perfectly as usual, so it may
not look as my PC is involved...
I've tried to uninstall and re-install DW but it does not
work as the profiles may be stored somewhere else and as soon as I
open my new DW, the sites are in !
Can anyone could tell me where are stored those profiles so I
could try to dump all about this and re-install DW.
Thanks
beefo

> Sometimes, the login/pass of my FTP acount is forgotten
and i need to
> re-enter
> it !
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3491671c
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"beefo" <[email protected]> wrote in message
news:f1uv98$a8$[email protected]..
> Hey everyone,
>
> I've been looking all around the web for this and
couldn't find it.
> I have a major problem with DW site window, more
specifically the
> profiles: it
> is way too slow !!!!
>
> When i change from a site to another one, it takes up to
10 sec.
> When i want to change the settings of a site it takes up
to 20 sec to open
> the
> properties window...same as when I want to add a new
one.
>
> Sometimes, the login/pass of my FTP acount is forgotten
and i need to
> re-enter
> it !
>
> All the rest is fine and works perfectly as usual, so it
is not my PC that
> is
> involved...
>
> I've tried to uninstall and re-install DW but it does
not work as the
> profiles
> may be stored somewhere else and as soon as I open my
new DW, the sites
> are in !
>
> Can anyone coul tell me where are stored those profiles
so I could try to
> dump
> all about this and re-install DW.
>
> Thanks
>
> beefo
>

Problem with Backgrounf Jobs in RAR 5.3

Hi All,
I Scheduled Background Jobs in RAR 5.3 ,But the jobs status showing from past 7 days as " Running " Please help me regarding this issue.its very urgent ,because of this problem My SOD report delayed for this month.
Every month it is taking 2 to 3 days to complete the jobs, But this time it is taking 7 day ,so i terminate the jobs and asked Basis team to restart the bg job service to stop the jobs of RAR
Previous months we are using same verient ,But at that time RAR 5.3 with SP13 and 2 threads,Now they changed as per below detals.
I am using RAR 5.3 SP 15 with 4 threads.
Below is the Job Log Dispay(unable to past complete Log)
=======================
Nov 8, 2011 12:14:46 AM com.virsa.cc.common.util.ExceptionUtil logError
SEVERE: null
Nov 8, 2011 12:14:58 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis getBAPIRoleData
INFO: -- Last Run Date is 2011-11-07
Nov 8, 2011 12:14:58 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis getBAPIRoleData
INFO: -- Current Date is 2011-11-08
Nov 8, 2011 12:14:58 AM com.virsa.cc.common.util.ExceptionUtil logError
SEVERE: null
java.lang.NullPointerException
Risk Analysis Time: Started @:Tue Nov 08 04:30:36 UTC 2011
performActPermAnalysis
INFO: Detailed Analysis Time:
Risk Analysis Time: Started @:Tue Nov 08 04:30:36 UTC 2011
Rule Load Time: Started @:Tue Nov 08 04:30:36 UTC 2011
Rule Load Time:14millisec
Org Rule Loop Time: Started @:Tue Nov 08 04:30:36 UTC 2011
Rule Loop Time: Started @:Tue Nov 08 04:30:36 UTC 2011
Rule Loop Time:5303millisec
Org Rule Loop Time:5303millisec
Risk Analysis Time:5481millisec
Nov 8, 2011 4:30:41 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
INFO: End Analysis Engine->Risk Analysis ..... memory usage: free=2024M, total=6144M
Nov 8, 2011 4:30:42 AM com.virsa.cc.common.RiskAnalysisReport render
INFO: RiskAnalysisReport render: memory changed=0M,free=2020M, total=6144M
Please help me regarding this issue.
thanks in advance,
suresh kumar
Edited by: K S KUMAR on Nov 8, 2011 6:36 AM

Hi Ashish,
My Background Job is Adhoc , This is not the first time doing ,every month i am doing this activity for SOD report (13 BG Jobs)and other reports,last month they updated SP13 to SP15.Now i am facing this issue.once BG Job Service restarted all the jobs running properly ,Why like that.i need root cause for this.
please help me regarding this.
thanks,
suresh kumar

Problem with Profile-Update-Request

I have a problem when I Try to use the profile update request.
First, I can use the "User-Data-Request" without problems. I use this sentences:
->String docSel="sh://sip:[email protected]/IMSPublicIdentity/";
->Document doc = psvc.getDocument(docSel);
But, when I Try to add a new line to modify the document (I send the same document witohout changes it):
->psvc.putDocument(docSel, doc)
I receive this exception:
java.lang.IllegalArgumentException: Access key invalid for request at com.bea.wcp.diameter.sh.ShSession.createRequest(ShSession.java:40)
at com.bea.wcp.diameter.sh.ShSession.createPUR (ShSession.java:26)
at com.bea.wcp.diameter.sh.ShApplication.putDocument(ShApplication.java:147)
at com.bea.wcp.diameter.sh.WlssShApplication.putDocument(WlssShApplication.java:79)
at com.bea.wcp.profile.ShProviderDirect.putDocument(ShProviderDirect.java:63)
at com.bea.wcp.profile.ShProviderCached.putDocument(ShProviderCached.java:65)
at com.bea.wcp.sip.engine.WlssProfileService.putDocument(WlssProfileService.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3217)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1984)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1891)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181).
Whats it's the problem?I think that I´m using the correct sentences to
send the profile, and I don´t know why receive this exception.
´Thanks, david.

I try to use RepositoryData and I obtain an exception too, but it´s different. In this case is:
####<13-feb-2008 16H09' CET> <Error> <Kernel> <CANASD-HP> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1202915357551> <BEA-000802> <ExecuteRequest failed
java.lang.NullPointerException: .
java.lang.NullPointerException:
     at com.bea.wcp.diameter.Request.sendAnswer(Request.java:197)
     at com.bea.wcp.diameter.Answer.commit(Answer.java:125)
     at com.bea.wcp.diameter.Session.sndMessage(Session.java:232)
     at com.bea.wcp.diameter.Answer.send(Answer.java:118)
     at com.bea.wcp.diameter.Transaction$1.run(Transaction.java:165)
     at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181).
For the HSS I´m using a simulator called FHoSS. Do you know that this simulator work well with WLSS?
Thanks.

Ipad 2 802.1X PEAP Authentication problem (With profile from IPCU)

Hi!
I'm in the processes of setting up a new wireless network for a costumer.
A little info about the hardware:
Cisco WLC 5508
Cisco AP 2602i
Cisco ISE - radius server
ipads gen 4 (iOS 6)
EAP-TLS (windows machines) and PEAP (Other stuff, ipads, andriod etc) as authentications methods
The radius server is using a server certificate from thier own PKI infrastructure therefor i need to push the root certificate of their CA to the clients in order to verify the authentication server. For this I use the iphone/ipad configuration utility.
I use the Use Per-connection password option
User that are allowed to connect are placed in a specific group in there AD.
The problem that I have is:
When a user thats not allowed to connect tries to authenticate to the network the ipad says stop and thats the way it supposed to be.
BUT after someone has faild to authenticate to the network and somebody else tries to connect the ipad only ask for a password and not a username.
I cant seem to get rid of this popup and therefor the ipad cant connect.
If I don't use the profile I can forget about the network and after that i can connect with a different user.
But then i can't verify the server-certificate and use the option per-connection password!
Please help!
Has someone else seen this type of bug.
//Simon

Hi, I am new with 802.1x, and was hoping that someone would help with these queries:
1. How is a certificate requested without being allowed on a network that is not authenticated with 802.1x. I had to first connect to an active network, retrieve a certificate with the proper username and password, and then physically connect to the port on the 2950 switch which was enabled to do 802.1x
2. My config is as below:
aaa new-model
aaa authentication dot1x default group radius
aaa authenication login default group radius
dot1x system-auth-control
interface f0/1
switchport mode access
dot1x port-control auto
end
I able to login using the radius server, so radius is working (on ports other than f1/0). However when connecting to f1/0, the port on the 2950 remains blocked.
3. The certificate is issued by the ca server, is viewable via Internet explorer,and is issued to the correct username which is on the active directory.
I even tried using local authenication with 802.1x, this did not work
4. If I have a certificate, will this automatically give me access to the 802.1x port?
5. I have windows 2000, and authenication is set to 'Smart Card or other certificate.
Am I missing anything?
Any advise will be greatly appreciated
Chris

JAR file problem with windows operating system rare

hi,
I have an application created with Eclipse 3.2, which also have a plugin that helps me to create jar files, migrate days ago all my application and my data base to a notebook that has a very rare operating system is Windows Vista, but is a version very rare and never seen, called oneAngel Illusion, and I think that that is not capable of running the JAR correctly, that when you double click or enter to JAR nothing happens, and I prove it on a machine that has XP and functioning properly.
I hope I can help with this!

pg_shadow wrote:
hi,
I have an application created with Eclipse 3.2, which also have a plugin that helps me to create jar files, migrate days ago all my application and my data base to a notebook that has a very rare operating system is Windows Vista, but is a version very rare and never seen, called oneAngel Illusion, and I think that that is not capable of running the JAR correctly, that when you double click or enter to JAR nothing happens, and I prove it on a machine that has XP and functioning properly.
I hope I can help with this!You should know, if you don't already, that your 'super rare' version of Windows Vista, sounds like one of numerous, illegal, cracked and knocked-off versions of Vista that have been floating about. Things like Windows Vista Silver and Windows Vista Sky are not only completely illegal reproductions of pirated copies of Vista but they often have terrible bugs and security deficiencies that can sacrifice the integrity of your data. Honestly, if you're already shooting yourself in the foot with this bootlegged operating system, just get Linux, it's just like stealing but without the unsavory prison shower encounters.

KB2956170 Problem with profile setup - Outlook 2013

After installing KB2956170, any new users that do not already have an Outlook profile cannot access mail. When attempting to connect to the Excahnge server, you never get prompted for your smart card credentials and then the profile setup fails.
If you remove the update, everything is fine again.

Hi,
It's the first time that I have seen this issue, would you please provide the exact error message about this issue, and could you share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them
to this email account: [email protected] (please use the link of this thread as the subject), this will help us investigate this issue.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Problem with .profile

Hi.
I have been editing the .env files for the db user on the application node of our development db and now when I log back in as that user I get this:
su - appdbdev
.profile[3]: !/bin/sh: not found.
.profile[3]: dev: not found.
Does this mean that I have something in the profile to edit? (I cant see anythin), or is it something else??
Help please!!
AIX 5.2 Oracle 9.2.0.1.0
Thanks
DA

Yes thanks.
Problem is, I have compared the profiles of my problem user and the profile of a sound user and they are the same:
Functioning cl user profile:
appcldev@TEST:more .profile
APPL_TOP=/oracli3/oracle/devappl;export APPL_TOP
. $APPL_TOP/DBCUST.env
. $APPL_TOP/APPSORA.env
PATH=/usr/java14/bin:/usr/local/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:$ORACLE_HOM
E/bin:$AD_TOP/bin:$HOME/bin:/usr/bin/X11:/sbin:/usr/local/bin:.
export J_HOME=/oracli3/oracle/devcomn/util/jre/1.1.8
export PATH
export SCRIPT_TOP=/oracli3/oracle/devcomn/admin/scripts/DEV_dbcl
if [ -s "$MAIL" ] # This is at Shell startup. In normal
then echo "$MAILMSG" # operation, the Shell checks
fi # periodically.
Profile of problem db user:
appdbdev@TEST:more .profile
APPL_TOP=/oradbi3/oracle/devappl;export APPL_TOP
. $APPL_TOP/DBCUST.env
. $APPL_TOP/APPSORA.env
PATH=/usr/java14/bin:/usr/bin:/etc:/usr/sbin:/oradbi3/oracle/devcomn/util/jre/1.
1.8/bin:/usr/ucb:$ORACLE_HOME/bin:$AD_TOP/bin:$HOME/bin:/usr/bin/X11:/sbin:/usr/
local/bin:.
export PATH
if [ -s "$MAIL" ] # This is at Shell startup. In normal
then echo "$MAILMSG" # operation, the Shell checks
fi # periodically.
export SCRIPT_TOP=/oradbi3/oracle/devcomn/admin/scripts/DEV_dbdb
Still not sure what to do as the profile looks fine!

WPA2 problems with profile management

Brand new X61, tried to connect to a wireless WPA2 network at home (pre-n router). I have the Intel ABG mini PCI adapter. IF I use lenovo profile management, it asks me politely to enter the PSK. But then it never connects. If I disable the profile maangmeent (Use Windows to manage this connection) then I get connected, but it takes a long time (2 minutes or so) to get an address. However, profile management keeps trying to take over. And when it does, the connection failes, and it turns the radio off. And I have to manually go through the process again.
It seems like there is a time out causing the problem, can this be adjusted?
It seems like the abg card is taking an inordinate amount of time to lock in on WPA2 networks, could a driver be the problem? Can this be rolled back since I have the latest installed?
Any other suggestions? BTW, it works fine if WPA is disabled, but that's not an option...

dbh369, welcome to the forum,
I moved your thread to here as this board is probably more appropriate to the theme.
It may also help to state which flavour of Windows / Service Packs you have installed.
Regards
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Problems with profile?

i have been using my express to run airtunes as well as an internet connection to my laptop. i had been gone over the weekend and when i turned my laptop on it couldn't find my network. i hadn't made any changes to the settings and i had used airport at several other places so i know it's not the wireless card. i called my service provider and they told me everything looked fine on their end.
i tried resetting express and it came up with a generic apple network which did show up over airport. from there i went to the express setup and looked at the list of profiles where my old profile was listed. however, when i try and select this to change my settings back to where i had them, i lose my connection and airport cannot find a connection.
does anyone have an idea of why this would be happening or what i'm doing wrong?? my next guess is to just delete the old profile and set-up a new one but i'm not sure why this happened or if there is something wrong with AE.
any comments would be appreciated. thanks!
g4 ibook/15GB 3G ipod Mac OS X (10.3.9)

Do you have multiple Locations set for AirPort on your iBook? If so, did you remember to switch back to the one appropriate for your home network?
To rule out the AirPort Express (AX) from being the issue, you should perform a "factory default" reset to get it back to it's "out-of-the-box" condition. Note: this will delete any saved profiles on the AX. (ref: http://docs.info.apple.com/article.html?artnum=108044)
Once reset, you can now configure it, as appropriate, for your network.

Problem With Profile Pics Not Appearing in iMesage

Why is it that I can have a profile picture added to a person in my contacts list, yet that picture may or may not show up in a conversation in iMessage? For some of my contacts the picture does appear, and for some it does not. I'm having this issue on my iPad Air and my iPhone 4.

On the iPad you will see pictures in the left-hand panel for each message thread but this feature is not implemented on the iPhone.
The Mac, in addition, shows the contact picture on each individual message.

Problem with Profiles

My Emac has several user accounts. I noticed some time ago that the S key has stopped functioning in the Admin. account, but it functions normally in the others. Can anyone advise what the problem might be, and how to solve it?
emac Mac OS X (10.3.9) 256MB RAM

Labhraidh,
Welcome to the Apple Discussions!
Have you tried opening System Preferences> Keyboard & Mouse, Keyboard Shortcuts tab, and checking if the 's' key by itself has somehow been assigned to some action? It might also help to drag /Users/ [admin user's name]/ Library/ Preferences/ com.apple.keycaps.plist to the Desktop and logging out and back in to see if that helps (it it doesn't, drag the .plist file back from the Desktop; if it does, redo your keyboard settings).

Nokia 7230 problem with profiles

Nokia 7230 keeps asking if I want to activate Flight profile at start-up even though I have only ever used General profile.

is it a box ? Go to messaging ,options,sim messages ,delete these messages .
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Problem with profile manager lion server

Good evening opening profile manager lion servers seem to me these 2 errors:
1 SC.Error: sc4011: lengths of pendingStoreQueryPairsguidsFromRemoteand did not match!
2 SC.Error: sc4012: lengths of pendingStoreQueryPairsguidsFromRemoteand did not match!
How do I delete these 2 errors that I deny the use of profilemanager?

Heres a follow up.
As you can see.
the enrolment profile should push through since the trust profile is already verified.
Here are the screenshots of my device enrolment;
then,
I honestly dont know why...;-(

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Problem with Profiles in AC RAR 5.3

Similar Messages

Maybe you are looking for