Problem with prompt for default in WEBI!

Hello friends
I am new to BO and Webi And I have a problem with a report. It happens that I have created a query in SAP (with Query Designer) and I created the Universe (with Universe Designer). The query gets a cost center to filter the data, but when I run the report in InfoView I asked the cost center, it comes with a default. Is it a property that can be turned off in Webi or elsewhere?
I would be grateful if I can help.
Regards

Is in the BEx query any default value selected for the cost centre?
Could you please mention here the where clause of the filter object for Cost Center in the universe ?

Similar Messages

Problem with connection for ePrint

Hello,
today I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but i've a problem with ePrint.
Concretely, printer is connecting to my home wifi and I can print without USB cable without any problems. But when I want setup ePrint function, I get a error, that the printer haven't any internet connection and I can't finish configuration of service.
Does anyone know, how I can eliminate the problem?
Thank you,
Denis
This question was solved.
View Solution.

Hi DenyKr,
I see that you're having problems with your printer connecting to web services. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select network tab at the top.
4. Left hand side select IPv4 under wireless.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
Let me know how it goes.

BICS Conection problem with prompts

Hi, All.
I have one problem with prompts in Webi 4.0. I build BEx query on the Infoset, create OLAP Connection in IDT. And then I try build webi reports appear one problem, I try create prompt on key field, but I cannot do this. Earlier, then I do report on universe I can do this. Can anybody give me advise by this problem?
Regard.
Fanil

Hi Jothi.
I agree with you but Bex do not allow you to have a restiction to certain values and then a variable on top of that. I have to build the filter in the Webi report and I cannot build it on the description. I have to build it on the key.
Koos.

Problem with mail for exchange after update on E72...

Hi everyone,
I updated Nokia E-mail to ver 3.9 on E72. Now I am facing a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
Can anybody suggest a way out.
Thanks
Anil

It could be a problem if you're using your network's connections...
I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
Could be worth checking with them to make sure it's supported.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Problem with facetime for mac

hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what...

Problem with Twitter for Mac notifications

Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.

Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS!

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
Hello,
On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
Take the demo: Curtain Call Demo
and within the instruments :
audio Recorder
Sampler
Smart Drums
Smart Strings
Smart Bass
Smart Keyboard
Smart Guitar
Keyboard
Drums
Guitar Amp
1.4.1 is the latest version for ios 6.
Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
With these instruments :
audio Recorder
Sampler ( to download the instrument )
Smart Drums ( to download the instrument )
Smart Strings (Download the instrument )
Smart Bass ( to download the instrument )
Smart Keyboard ( to download the instrument )
Smart Guitar
Keyboard
Drums
Guitar Amp ( to download the instrument )
and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
Complete collection of GarageBand instruments and sound at a price of : € 4.49
As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
And besides not wearing demo Demo Curtain Call : (
GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
regards

I've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?

I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

Problem generating stubs for Java EJB web service deployed in OAS

I created an EJB web service and I've successfully deployed it in my Oracle App Server. Some of the methods work fine but others produce the ff error:
org.apache.soap.SOAPException - java.lang.IllegalArgumentException: No Serializer found to serialize [classname] using encoding style [encoding]It seems that the objects specified as parameters in the web service methods exposed are the only ones that had stubs generated for them. Other objects I use, which are usually wrapped inside a Vector, did not have generated stubs.
Example:
public String loginUser(UserDTO userDTO) throws RemoteException, NamingException, SQLException;
public String addItems (Vector vecItems) throws RemoteException, NamingException, SQLException; // where vecItems is a collection of ItemDTO objects In this scenario, stubs were generated for the UserDTO class, but not for the ItemDTO class. In effect, calling the addItems method resulted to the exception I mentioned above.
I did a workaround wherein I declared a dummy method which accepted all the types of objects I needed as parameters so all the necessary stubs can be generated, but this fix doesn't feel like it's the proper solution to my problem.
If anyone can help me, it would be greatly appreciated. Thanks!

Crossposted:
Problem generating stubs for Java EJB web service deployed in OAS

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Please Help?! Problems with Viber for iPhone 4s

Please help!
I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
If anyone is able to help me out it would be much appreciated! Thanks

You activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.

We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

Problem with RpClean for Rep Development 3.0.L.0

Hello Forte Users :
We are running Forte 3.0.L.0 we previously upgraded from 3.0.J.1, 20
developer workspaces and a repository for both development and
deployment.
We are facing problems when we run an Rpclean for this Development
Repository, this process aborts with a fatal error message, the log
screen for this process issues the following messages
the deletion objects is made,
the repository compress is made,
the rebuild of the index is made,
but then when the process is creating back the repository it displays
"fatal error" and issues a message that it cannot truncate the .btx
file.
the command executed is :
rpclean -n Desarrollo -fr :/var/forte/repodesa -t /var/jaeb
Any experience on this regard?. If any, would be highly appreciated.
Jorge
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Jorge,
How big is your repsitory. Because if you are running on Digital Unix
you will have problems, when the repository is bigger then 1 gigabyte!
During the rpclean process a 'copy' is build and the unix system cannot
handle more than 2 gigabyte. I expect the maximum size of the repository
will be different for each operating system, but this might be your
problem!
Hans van Drunen
Origin DeskTop Business Solutions Rotterdam
Admiraliteitskade 60, 3063 DC Rotterdam
Telefoon : +31 10 - 242 81 00
Fax : +31 10 - 242 81 81
-----Original Message-----
From: Jorge Espinoza [mailto:[email protected]]
Sent: Wednesday, June 16, 1999 18:17
To: [email protected]
Subject: Problem with RpClean for Rep Development 3.0.L.0
Hello Forte Users :
We are running Forte 3.0.L.0 we previously upgraded from 3.0.J.1, 20
developer workspaces and a repository for both development and
deployment.
We are facing problems when we run an Rpclean for this Development
Repository, this process aborts with a fatal error message, the log
screen for this process issues the following messages
the deletion objects is made,
the repository compress is made,
the rebuild of the index is made,
but then when the process is creating back the repository it displays
"fatal error" and issues a message that it cannot truncate the .btx
file.
the command executed is :
rpclean -n Desarrollo -fr :/var/forte/repodesa -t /var/jaeb
Any experience on this regard?. If any, would be highly appreciated.
Jorge
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Problem with prompt for default in WEBI!

Similar Messages

Maybe you are looking for